Re: ATM Polishing Compounds Compared

["k.honders" <k.honders@worldonline.nl>]

-----Oorspronkelijk bericht-----
Van: lifedata@vol.com <lifedata@vol.com>
Aan: k.honders <k.honders@worldonline.nl>
Datum: maandag 12 juli 1999 16:00
Onderwerp: Re: ATM Polishing Compounds Compared


>>Probably there are headhunters on the net .So to see you
>>missed the toplines of my message .They were,
>
>Didn't miss a thing.  You indicated something was important (speed
>and pressure), but gave no indication of what to do about it.
>
>Jim L
>1 John 5:13
>
hi Jim,

        Included is a small picture of an 8" mirror roc.3200mm. It shows
(Unretouched)
effects of an effort to finish polishing as quick as possible.I took
polishing pads ,ceriumoxyde and set the speed and pressure of my machine as
high as it could bare.Average surfaceroughness about 1/4 to 1/5 wave.After
3/4 of a hour polishingtime on pitch with Ceo and a  (much)  lower  speed
the surface showed almost no defects besides a nasty tde of about 1/2 wave.


greetings,
Klaas Honders,
k.honders@worldonline.nl

M10.jpg