Amateur Telescope Makers (ATM) Archive for JUL99 - by author
- Reply: ATM refractor question
- From: " Gianluca Carinci" <g.carinci@iol.it>
- Re: ATM Eye relief
- From: " Gianluca Carinci" <g.carinci@iol.it>
- R: ATM Focal length
- From: " Gianluca Carinci" <g.carinci@iol.it>
- ATM cutting pyrex
- ATM resurface 10"
- ATM surplus grinding machine
- ATM pitch suppliers in Ventura co. or LA
- ATM machine grinding strokes
- Re: ATM machine grinding strokes
- Re: ATM machine grinding strokes
- (O.T.) ATM - Stellafane update (long)
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Another Question from a Newbie--Mirror Figuring in the Cell
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM / Increasing the emissivity of glass
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM Glass removal with bench grinder wheel
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Berry dimension modifications for 8"
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM gear backlash in Alt. drive
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Collimation tool
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM Chamfering tool
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM - Worm gear source?
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM: Keep Polishing or Back to the old Grind?!
- From: Adam Rosenberg <adamr@synopsys.com>
- ATM RE: Keep Polishing or Back to the old Grind?!
- From: Adam Rosenberg <adamr@synopsys.com>
- ATM seeking address
- From: Adams <adams@rmci.net>
- ATM compressed air
- From: Adams <adams@rmci.net>
- SEC: UNCLASSIFIED RE: ATM Collimation Question
- From: afmartyn@raaf.defence.gov.au
- ATM Old S&T article
- From: Al Francis <aquila@csrlink.net>
- ATM Alt/Az/FR Piggyback Autoguider a Success
- From: Al Kelly <akelly@ghg.net>
- ATM Adjusting RA Tracking Rate Question
- From: "Al Klayton" <aklayton@pcisys.net>
- Re: ATM Adjusting RA Tracking Rate Question
- From: "Al Klayton" <aklayton@pcisys.net>
- Re: ATM star testing program
- From: "Alexander Urban" <urban@mpe.mpg.de>
- ATM Mounting Encoders on ETX
- ATM Where to find optical encoders
- ATM RE: optical encoders
- Re: ATM long-term lap preservation
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM making maksutovs
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Thin glass blank & some questions
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Chamfering tool
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM polishing advice sought
- ATM Re: Wooden Equatorial Mounts
- Re: ATM using DSC for polar alignment...
- ATM Coring Speed
- Re: ATM couple questions...
- Re: ATM Spheres, Parabolas etc.
- Re: ATM Optical Flat
- ATM An $18.00 Null Test
- Re: ATM An $18.00 Null Test
- Re: ATM An $18.00 Null Test
- Re: ATM Dobsonian design questions
- From: Ari Friedman <ari@birmingham-us.crosswinds.net>
- ATM "J&R" crappy Celestron telescopes
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM My first mirror + lasers
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM KEN LOWTHER
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM New e-mail
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM #500 sandpaper?
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Spring counterweights
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM ADMIR from W-B
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Collimation tool
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Star testing
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Testing 16" flat
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM 20": first light
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM No more questions.
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM Re: Welcome and Orientation For Newbies
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM star data sources
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Anti reflection coatings and TDE (not related)
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM Anti reflection coatings and TDE (not related)
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- Re: ATM Solar telescope design
- From: "Associazione Astronomica Umbra" <astroumbra@edisons.it>
- Re: ATM Adding a fan to an SCT - some lessons learned
- ATM Earl of Crawford mount - HELP
- Re: ATM RE: 12" refractor
- Re: ATM Earl of Crawford mount - HELP
- ATM Sept issue / Pantratz
- Re: ATMing in the September Sky & Telescope
- Re: ATM Sept issue / Pantratz
- Re: ATM Where to find optical encoders
- Re: ATM Threaded rod
- Re: ATM Kydex T vs. Kydex 100
- Re: ATM New Scope
- Re: ATM Re: : The BIG Time
- From: "astrola" <astrola@dmrtc.net>
- ATM Re: Cleaning Teflon & Formica Bearings
- ATM Re: Pringle Wavefront
- ATM Appeal the Destruction of Stellafane
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM refractor question
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- ATM using DSC for polar alignment...
- From: "Benoit Schillings" <benoit@be.com>
- ATM Re:
- From: Berger <berger@mediaone.net>
- RE: ATM Another parabolizing stroke question
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Collimation Question
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Collimation Question
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- ATM Link to Bob Kestner?
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Optics for a good mirror
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- ATM RE: Keep Polishing or Back to the old Grind?!
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Telescoping truss tubes
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM classes and pitch laps
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Truss Tubes - Flare Fittings are superb!
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM star test of 6"er
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Threaded rod
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM center dotting secondaries
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM An $18.00 Null Test
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM center dotting secondaries
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM An $18.00 Null Test
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- For Give Away: Sonotube OTA. Was: ATM Sonotube in the UK
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Anti reflection coatings and TDE (not related)
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM 10" Problems
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- ATM Feasibility of making a Ross null lens
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- ATM Homepage update
- From: behambu@teleline.es (Berthold Hamburger)
- ATM OOps! Homepage update
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM gear backlash in Alt. drive
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM re: Motors
- From: "Bill Bass" <bbass@lds.net>
- Re: ATM resurface 10"
- From: Bill Marriott <btk@pacbell.net>
- ATM re: long term preservation of lap
- From: Bill Marriott <btk@pacbell.net>
- ATM Star test collimation dilemma
- From: "Bob King" <lakewind@duluth.infi.net>
- ATM Another parabolizing stroke question
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM 1st mirror: 8" or 10"
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Off topic, but please read
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Central zone for Couder mask
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM My first zonal measurement
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM star testing program
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Dobsonian design questions
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Interpreting Tex 3.2
- From: Bob Prabowo <BOB@bahana.co.id>
- Re: ATM couple questions...
- From: Bob Smallwood <smallwood@technologist.com>
- Re: ATM Casting lead weight
- Re: ATM seeking address
- Re: ATM star testing program
- From: "bprewitt" <bprewitt@neo.rr.com>
- Re: ATM Another parabolizing stroke question
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Coma and RFT designs
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Collimation Question
- From: Brad Davy <bdavy@fred.net>
- ATM Re:
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Mirror-making classes
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Odd behavior of stepping motor circuit
- From: Brad Davy <bdavy@fred.net>
- Re: ATM star data sources
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Coma and RFT designs
- From: Bradley Davy <bdavy@fred.net>
- ATM Collimation Question
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM mirror
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM Loaded questions about mirror cells
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM An $18.00 Null Test
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM casting tiles into a plaster tool
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM casting tiles into a plaster tool
- From: Bradley Davy <bdavy@fred.net>
- ATM First Light !!
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Truss tube clamps
- From: "Brent Russell" <brussel@global.co.za>
- ATM I need a samll lense...
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Powering secondary heaters
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Daisy Sight Conversion Project
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Motor
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Daisy Sight Conversion Project
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Daisy Sight Conversion Project
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Coma and RFT designs
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Daisy Sight Conversion Project
- From: Brian Nestel <blast@aloha.net>
- Re: ATM flint glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM flint glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM flint glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM flint glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM flint glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Night Vision
- From: Brian Nestel <blast@aloha.net>
- Re: ATM polymer optical window
- From: Brian Nestel <blast@aloha.net>
- Re: ATM polymer optical window
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Night Vision
- From: Brian Nestel <blast@aloha.net>
- Re: ATM polymer optical window--Here's the transmissionnumber...
- From: Brian Nestel <blast@aloha.net>
- Re: ATM using DSC for polar alignment...
- From: Brian Nestel <blast@aloha.net>
- Re: ATM using DSC for polar alignment...
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Night Vision
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Night Vision
- From: Brian Nestel <blast@aloha.net>
- Re: ATM ADMIR from W-B
- From: Brian Nestel <blast@aloha.net>
- Re: ATM ADMIR from W-B
- From: Brian Nestel <blast@aloha.net>
- Re: ATM #500 sandpaper?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Nema 17 frame steppers....
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Nema 17 frame steppers....
- From: Brian Nestel <blast@aloha.net>
- Re: ATM using ronchi at the eyepiece
- From: Brian Nestel <blast@aloha.net>
- Re: ATM using ronchi at the eyepiece
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Re: : The BIG Time
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Threaded rod
- From: Brian Nestel <blast@aloha.net>
- Re: ATM 11.5" mystery glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Threaded rod
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Sept issue / Pantratz
- From: Brian Nestel <blast@aloha.net>
- Re: ATM copyright/patent.
- From: Brian Nestel <blast@aloha.net>
- Re: ATM : Hole in the middle
- From: Brian Nestel <blast@aloha.net>
- Re: Is there a bug in the ATM archive search algorithm?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Sonotube in the UK
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Sonotube in the UK
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: Brian Nestel <blast@aloha.net>
- RE: ATM Telescoping truss tubes
- From: "Bruce Sayre" <sayre@foothill.net>
- RE: ATM Truss Tubes - Flare Fittings are superb!
- From: "Bruce Sayre" <sayre@foothill.net>
- Re: ATM pitch suppliers in Ventura co. or LA
- Re: ATM pitch suppliers in Ventura co. or LA/ Pt2
- Re: ATM Active mirror figure correction?
- ATM Prism Diagonal
- ATM Copy Scope
- ATM Adding a Prism Diagoanal
- ATM re:Adding a prism diagonal
- ATM New Copy Scope Webpage
- ATM re: New Copy Scope Webpage
- ATM: Grinding to ROC
- From: CFRandom <cfrandom@qx.net>
- RE: ATM "J&R" crappy Celestron telescopes
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Casting lead weight
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Night Vision
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Night Vision
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Anti reflection coatings and TDE (not related)
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM drilling rubber
- From: Charles Broward <afn43753@afn.org>
- ATM focuser
- From: Charles Broward <afn43753@afn.org>
- RE: RE: ATM Epoxied Sonotube Question
- RE: Re: ATM Truss tube connectors
- ATM Off topic, Moon crash
- ATM Ruling for Mel
- Re: ATM Daisy Sight Conversion Project
- From: "Cho, Wilson" <wcho@microsemi.com>
- Re: ATM Turn Down Edge?
- From: Christopher Krubel <ckrubel@bellsouth.net>
- Re: ATM Night Vision
- From: Christopher Krubel <ckrubel@bellsouth.net>
- ATM Construction of Telrad
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Casting lead weight
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: cleaning Teflon and Formica bearings
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Mersenne scopes
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM: Is this Crayford?
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Looking for a list member
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Mirrors from India
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Epoxied Sonotube Question
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Babbit metal substitutions
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM "Glass giant of Palomar"
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Telescope plans
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Woodshop Scope Plans
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Woodshop Telescope plans
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Woodshop Telescope plans
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Adjusting RA Tracking Rate Question
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM Coma and RFT designs
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Optical Windows for CCDs(translation)
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Followup on silicone advice
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Truss tube clamps
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM truss clamps
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM flint glass
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Truss tube connectors
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Would someone direct me to Michael Pankratz' design?
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Night Vision
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Twelve inch
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Questions regarding the old 12
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Some more note on the old 12
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM More notes on the 12"
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Twelve Inch Clivesonian
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM It this Crayford?
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM It this Crayford?
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Nema 17 frame steppers....
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Nema 17 frame steppers....
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Apogee surplus stuff
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Truss tube clamps
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Mylar & Vac-Scope
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Your best shot.
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Your best shot.
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Pics...
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Compact telescope configuration
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Folded Gregorian
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Updated web site.
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM split ring mounts
- From: Dale Campbell <campbeld@abs-lcms.com>
- Subject: Re: ATM Loaded questions about mirror cells
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Loaded questions about mirror cells
- From: Dale Campbell <campbeld@abs-lcms.com>
- ATM 10" Problems
- From: "Dale Schmitz" <aetheria@concentric.net>
- Re: ATM SDI Mirror
- From: "Dan Brown" <danb35@earthlink.net>
- Re: ATM Powering secondary heaters
- From: "Dan Brown" <danb35@earthlink.net>
- Re: ATM Powering secondary heaters
- From: "Dan Brown" <danb35@earthlink.net>
- Re: ATM Casting lead weight
- From: Dan Brown <danb35@earthlink.net>
- ATM Testing of optical flats
- From: Dan Cassaro <dcass@mediaone.net>
- ATM Testing optical flats
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Re: Tile Tool
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Sonotube in the UK
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Another parabolizing stroke question
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Another parabolizing stroke question
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Another Question from a Newbie--Mirror Figuring in the Cell
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM broke the 38" mirror blank
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Figuring
- From: "Dan Chaffee" <dchaffee@gvi.net>
- re: ATM Epoxied Sonotube Question
- From: Dan Montgomery <danmont@umich.edu>
- ATM Help with Azimuth bearing assembly sought
- From: Dan Montgomery <danmont@umich.edu>
- Re: (O.T.) ATM - Stellafane update (long)
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Casting lead weight
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Re: : The BIG Time
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Night Vision
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Night Vision
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATMing in the September Sky & Telescope
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM It this Crayford?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM: Is this Crayford?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM It this Crayford?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Loaded questions about mirror cells
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM O.T.-Repeat Messages
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Would someone direct me to Michael Pankratz' design?
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM center dotting secondaries
- From: "Danskey Residence" <ddanskey@web-ster.com>
- Re: ATM Cable drive
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- ATM Undersized, overpriced bearings, was: The BIG Time
- From: Dave Sopchak <das@po.cwru.edu>
- ATM Undersized, overpriced bearings, was: The BIG Time
- From: Dave Sopchak <das@po.cwru.edu>
- ATM Undersized, overpriced bearings, was: The BIG Time
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Night Vision
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Twelve inch
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM One benefit of silvering your own mirror
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM It this Crayford?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM One benefit of silvering your own mirror
- From: Dave Sopchak <das@po.cwru.edu>
- ATM Crayford bearing offer is now closed
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Truss tube clamps
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Active mirror figure correction?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Thin glass blank & some questions
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Copy Scope
- From: davebevel@mindspring.com
- Re: ATM Adding a Prism Diagoanal
- From: davebevel@mindspring.com
- Re: ATM broke the 38" mirror blank
- From: davebevel@mindspring.com
- ATM Crayford focuser drawings
- From: davebevel@mindspring.com
- ATM Re: : The BIG Time
- From: davebevel@mindspring.com
- ATM Re: : The BIG Time
- From: davebevel@mindspring.com
- ATM Glass blanks & crayford stuff
- From: davebevel@mindspring.com
- Re: ATM Truss tube connectors
- From: davebevel@mindspring.com
- Re: ATM Truss tube connectors
- From: davebevel@mindspring.com
- Re: ATM Truss tube connectors
- From: davebevel@mindspring.com
- Re: ATM Re: : The BIG Time
- From: davebevel@mindspring.com
- Re: ATM CopyScope lens
- From: davebevel@mindspring.com
- Re: ATM last Tests
- From: David and Sherry Trahan <strahan@umd5.umd.edu>
- ATM OSLO + Orange County = ??????
- From: "David J. File" <davefile@usa.net>
- ATM star testing program
- From: david lewis <lewis@eecg.toronto.edu>
- Re: ATM flint glass
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- ATM MGIII
- From: David Reed <dzreed@mail.rdu.bellsouth.net>
- ATM polystyrene gears
- From: "david s. white" <dswhite@stic.net>
- Re: ATM RE: 12" refractor
- From: "David Simons" <hmsimons@hotmail.com>
- Re: ATM R E Brandt Lens for refractor
- From: "David Simons" <hmsimons@hotmail.com>
- ATM NEWT & a 13" F5 mirror
- From: David Smith <smithers@ucla.edu>
- ATM new to the list--intro
- From: David Smith <smithers@ucla.edu>
- ATM copy machine lenses into finder scope
- From: David Smith <smithers@ucla.edu>
- Re: ATM Threaded Rod
- From: David Wray <dwray@erinet.com>
- Re: ATM Gluing truss tubes and holes that are too large....
- From: Dennis Rech <dennisrech@home.com>
- Re: SV: ATM Gluing truss tubes and holes that are too large....
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Grinding unequal size blanks
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Coring Speed
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Epoxied Sonotube Question
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM subscribed
- From: Detlev Markfort <detlev.markfort@cityweb.de>
- ATM Daisy Sight Conversion Project
- From: dhalliday@tectrol.com
- ATM Daisy Sight Conversion Project
- From: dhalliday@tectrol.com
- ATM Night Vision
- From: dhalliday@tectrol.com
- ATM mirror glue - methylsilanes
- From: Dominic-Luc Webb <dominic@enk.ks.se>
- ATM flint glass
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Loaded questions about mirror cells
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Re: : The BIG Time
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM copyright/patent.
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM copyright/patent.
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM why just binocular eyepieces
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM why just binocular eyepieces
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM why just binocular eyepieces
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Folded Gregorian
- From: Don Loftus <dloftus@edu15.coe.ufl.edu>
- Re: ATM SCT mirror flop - how about shims?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Cutting aluminum rings
- From: Donald Clement <clement@inetworld.net>
- ATM Video Monitor & Foucault Tester
- From: Donald Clement <clement@inetworld.net>
- Re: ATM pitch suppliers in Ventura co. or LA
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Truss tube clamps
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Truss tube clamps
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Re: : The BIG Time
- From: Donald Clement <clement@inetworld.net>
- ATM Direct drive?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Direct drive?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Direct drive?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Direct drive?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Direct drive?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM It this Crayford?
- From: Donald Clement <clement@inetworld.net>
- Re: AW: ATM Testing optical flats
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Cable drive
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Cable drive
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Cable drive
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Cable drive
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Cable drive
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Threaded rod
- From: Donald Clement <clement@inetworld.net>
- ATM tapering tubing
- From: Donald Clement <clement@inetworld.net>
- Re: ATM No more questions.
- From: Donald Clement <clement@inetworld.net>
- Re: Subject: ATM No more questions.(OT)
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Powering secondary heaters
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Powering secondary heaters
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Powering secondary heaters
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Powering secondary heaters
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Powering secondary heaters
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Gluing truss tubes and holes that are too large....
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Gluing truss tubes and holes that are too large....
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Epoxied Sonotube Question - Long
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM lens cement
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Off topic, Moon crash
- From: "Donn Starkey" <starkey@fwi.com>
- ATM Cutting aluminum rings
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM: Grinding to ROC
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Re: : The BIG Time
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Re: : The BIG Time
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Telescoping truss tubes
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM classes and pitch laps
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM couple questions...
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Off topic, Moon crash
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Off topic, Moon crash
- From: Donovan Buck <donovan@bravoz.com>
- Re: Subject: Re: ATM Loaded questions about mirror cells
- From: Donovan Buck <donovan@bravoz.com>
- ATM Re: : The BIG Time (OT and Long)
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM No more questions. (OT)
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM : Hole in the middle
- From: Donovan Buck <donovan@bravoz.com>
- ATM re: Motors
- From: "Doug Arion" <ariond1@carthage.edu>
- Re: ATM 11.5" mystery glass
- From: Doug Miller <mildg@sk.sympatico.ca>
- Re: ATM Optical Windows for CCDs(translation)
- From: Douglas Gourlay <dlg@worldchat.com>
- Re[2]: ATM Daisy Sight Conversion Project
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Collimation Question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Video Monitor & Foucault Tester
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Casting lead weight
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM Collimation Question
- From: Dwight Elvey <elvey@hal.com>
- Re: SEC: UNCLASSIFIED RE: ATM Collimation Question
- From: Dwight Elvey <elvey@hal.com>
- ATM Collimation
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Collimation
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM help
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM Night Vision
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM binocular dobsonian
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Night Vision
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Night Vision
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Direct drive?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Night Vision
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Night Vision
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM bino separation distance
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Collimation tool
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM It this Crayford?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM spider in the eye
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Cable drive
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Cable drive
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Loaded questions about mirror cells
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Loaded questions about mirror cells
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Cable drive
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM : Hole in the middle
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Active mirror figure correction?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM : Hole in the middle
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Loaded questions about mirror cells
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM center dotting secondaries
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Loaded questions about mirror cells
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM An $18.00 Null Test
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Eye relief
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM why just binocular eyepieces
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Powering secondary heaters
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Powering secondary heaters
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Eye relief
- From: Dwight Elvey <elvey@hal.com>
- Re: SV: ATM Re:Photon wavefunctions
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Mirror-making classes
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM classes and pitch laps (long)
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Glass removal with bench grinder wheel
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Cad Programs
- From: Ed Falk <Ed.Falk@eng.sun.com>
- ATM Miatascope
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM using ronchi at the eyepiece
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM using ronchi at the eyepiece
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM using ronchi at the eyepiece
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Loaded questions about mirror cells
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Loaded questions about mirror cells
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM star data sources
- From: Ed Falk <Ed.Falk@eng.sun.com>
- RE: ATM It this Crayford?
- From: Edwin Spector <ems@lucent.com>
- Re: ATM Casting lead weight
- From: Eli Vandevoorde <elivv@efn.org>
- Re: ATM Night Vision
- From: Eli Vandevoorde <elivv@efn.org>
- Re: ATM casting tiles into a plaster tool
- From: Eli Vandevoorde <elivv@efn.org>
- ATM First light and advice for retouching
- From: Eric Royer <eroyer@club-internet.fr>
- Re: ATM Earl of Crawford mount - HELP
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Earl of Crawford mount - HELP
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Night Vision
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Direct drive?
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Night Vision
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM New discussion??? Fouc. test errors
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM New discussion??? Fouc. test errors
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Clyde-O-Scope
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- ATM polymer optical window
- From: "Fabio Falchi" <falchifa@tin.it>
- ATM Aussie grit and blank suppliers?
- From: "Fearon, Gary" <gary.fearon@wapl.com.au>
- RE: ATM 10" Problems
- From: "Fearon, Gary" <gary.fearon@wapl.com.au>
- ATM Solar telescope design
- From: "Francis Milsom" <francis@milsom07.freeserve.co.uk>
- Re: ATM Adding a Prism Diagoanal
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Adding a Prism Diagoanal
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Gluing truss tubes and holes that are too large....
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Casting lead weight: Source of lead
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Casting lead weight: Source of lead
- From: "Frank" <thewards@mindspring.com>
- Re: ATM flint glass
- From: "Frank" <thewards@mindspring.com>
- Re: ATM flint glass
- From: "Frank" <thewards@mindspring.com>
- Re: ATM flint glass
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Off Topic: Titles,etc.
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Diagonal Mirror
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: 8 to Great (& India mirrors)
- From: "Frank" <thewards@mindspring.com>
- Re: Mel responds, was Re: ATM Ruling for Mel
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Active mirror figure correction?
- From: "Frank" <thewards@mindspring.com>
- Re: ATM making maksutovs
- From: "Frank" <thewards@mindspring.com>
- Re: ATM No more questions. (OT)
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Frank" <thewards@mindspring.com>
- Re: ATM 10" Problems
- From: "Frank" <thewards@mindspring.com>
- RE: ATM determining resolving power.
- From: Frank Di Marzio <frank@trinity.unimelb.edu.au>
- RE: RE: ATM determining resolving power.
- From: Frank Di Marzio <frank@trinity.unimelb.edu.au>
- ATM polishing advice sought
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM polishing advice sought
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Truss tube clamps
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- RE: Re: ATM Truss tube clamps
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM long-term lap preservation
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM vacuum vs ion beam coatings
- From: "Gary McKenzie" <garymck@ozemail.com.au>
- Re: ATM Coma and RFT designs
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Re: : The BIG Time
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Re: : The BIG Time
- From: Gary Seronik <gseronik@netway.com>
- ATMing in the September Sky & Telescope
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Old S&T article
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM New discussion??? Fouc. test errors
- From: Gary Seronik <gseronik@netway.com>
- Re: ATMing in the September Sky & Telescope
- From: Gary Seronik <gseronik@netway.com>
- Re: ATMing in the September Sky & Telescope
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM New discussion??? Fouc. test errors
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Sept issue / Pantratz
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Night Vision
- From: gwoods@albany.net (Gary Woods)
- ATM Truss tube connectors
- From: Gerald Dietz <geraldd@zianet.com>
- Re: ATM Truss tube connectors
- From: Gerald Dietz <geraldd@zianet.com>
- Re: ATM Night Vision
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Night Vision
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Night Vision
- From: "Gerd F. Herzogenrath" <gfh@fh-furtwangen.de>
- ATMing in the September Sky & Telescope
- From: "Gerd F. Herzogenrath" <gfh@fh-furtwangen.de>
- ATM Optics Programs
- From: "Gerd F. Herzogenrath" <gfh@fh-furtwangen.de>
- ATM center dotting secondaries
- From: gf <gforney@erols.com>
- ATM star data sources
- From: gf <gforney@erols.com>
- ATM star data sources - thanks
- From: gf <gforney@erols.com>
- Re: ATM broke the 38" mirror blank
- From: gstacy@premierweb.net (GilbertStacy)
- Re: ATM Feasibility of making a Ross null lens
- From: gstacy@premierweb.net (GilbertStacy)
- Re: ATM Feasibility of making a Ross null lens
- From: gstacy@premierweb.net (GilbertStacy)
- ATM email
- From: Glen Bankston <microsys@alltel.net>
- Re: ATM Night Vision goggles
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM Re: Eye relief (life with contacts)
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM: 10" Al Tube
- From: Glen Youman <gleny@starstream.net>
- Re: ATM Re: : The BIG Time
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM Night Vision
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- ATM Mirror-making classes
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM classes and pitch laps
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATMing in the September Sky & Telescope
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM It this Crayford?
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- ATM 11.5" mystery glass
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM 11.5" mystery glass
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM 11.5" mystery glass
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- ATM REMOVAL FROM LIST TEMPORARILY
- From: "Harries,Rob" <Rob.Harries@afrox.boc.com>
- Re: ATM MGIII
- From: Hemrit <klowther@concentric.net>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Henry Ward" <henry.ward@mcmail.com>
- ATM updated page
- From: Hermit <klowther@concentric.net>
- Re: ATM determining resolving power.
- From: Hermit <klowther@concentric.net>
- Re: ATM No more questions. (OT)
- From: Hermit <klowther@concentric.net>
- Re: ATM : Hole in the middle
- From: Hermit <klowther@concentric.net>
- Re: Is there a bug in the ATM archive search algorithm?
- From: Hermit <klowther@concentric.net>
- Re: Is there a bug in the ATM archive search algorithm?
- From: Hermit <klowther@concentric.net>
- Re: ATM OSLO / Stellafane Update
- From: Hermit <klowther@concentric.net>
- Re: ATM OSLO + Orange County = ??????
- From: Hermit <klowther@concentric.net>
- ATM Stellafane
- ATM Web Info on zonal errors
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Help with gross undercorrection
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- Re: ATM prism diagonal
- From: Hugues_Laroche@ses-astra.com
- Re: Re[3]: ATM Optics Question from a Newbie
- From: Hugues_Laroche@ses-astra.com
- ATM OT: Catastrophy at the "Observatory of Pic de Bure"
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Figuring
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Figuring
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Figuring
- From: Hugues_Laroche@ses-astra.com
- Re: ATM polystyrene gears
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Star testing
- From: Hugues_Laroche@ses-astra.com
- Re: AW: ATM Testing optical flats
- From: Hugues_Laroche@ses-astra.com
- Re: ATM long-term lap preservation
- From: Hugues_Laroche@ses-astra.com
- ATM 20": first light
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Truss tube clamps
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Your best shot.
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Large Dobsonians With Good Eyepiece Positions
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Generator and El Cheapo diamond tooling
- From: iss@pvtnetworks.net
- Re: ATM Truss tube clamps
- From: iss@pvtnetworks.net
- Re: ATM Collimation
- From: iss@pvtnetworks.net
- ATM Re: [CCD] Measurement and elimination of PEC with sync motor drives
- From: iss@pvtnetworks.net
- Re: ATM Direct drive?
- From: iss@pvtnetworks.net
- ATM Focal reducer for 6" apo
- From: iss@pvtnetworks.net
- Re: ATM Focal reducer for 6" apo
- From: iss@pvtnetworks.net
- Re: ATM gear backlash in Alt. drive
- From: iss@pvtnetworks.net
- Re: ATM bino separation distance
- From: iss@pvtnetworks.net
- Re: ATM bino separation distance
- From: iss@pvtnetworks.net
- Re: ATM determining resolving power.
- From: iss@pvtnetworks.net
- Re: ATM Cable drive
- From: iss@pvtnetworks.net
- Re: ATM Loaded questions about mirror cells
- From: iss@pvtnetworks.net
- Re: ATM Active mirror figure correction?
- From: iss@pvtnetworks.net
- Re: ATM An $18.00 Null Test
- From: iss@pvtnetworks.net
- Re: ATM why just binocular eyepieces
- From: iss@pvtnetworks.net
- Re: ATM Anti reflection coatings and TDE (not related)
- From: iss@pvtnetworks.net
- ATM Thin Blanks
- From: "James O'Malley" <omalleyj@eclipse.net>
- ATM Re: Truss tube clamps
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re Babbit Substitutions
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Machining rubber
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM New Scope
- From: James P Crombie <jpcrombie@islandtelecom.com>
- Re: ATM Coma and RFT designs
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Central zone for Couder mask
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM: Keep Polishing or Back to the old Grind?!
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM New discussion??? Fouc. test errors
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM New discussion??? Fouc. test errors
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM New discussion??? Fouc. test errors
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Correcting a depressed zone, interpeting Foucault shadows
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Spheres, Parabolas etc.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM using ronchi at the eyepiece
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Interpreting Tex 3.2
- From: "James W. Burrows" <burrjaw@halcyon.com>
- RE: ATM Folded Gregorian
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM Re: Equatorial Mount
- From: "Jean-Marc.Becker" <Jean-marc.Becker@wanadoo.fr>
- Re: ATM Re: : The BIG Time
- From: "Jean-Marc.Becker" <Jean-marc.Becker@wanadoo.fr>
- Re: ATM : Hole in the middle
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM Re Sonotube in the UK
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: Tempered Glass For ATMs??
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM mirror and diagnal
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM classes and pitch laps (long)
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM RE: Tile Tools
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Cad Programs
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Question on grinding surface stability
- From: Jim Fitch <jf@arn.net>
- Re: ATM Night Vision
- From: Jim Fitch <jf@arn.net>
- Re: ATM Re: Cleaning Teflon & Formica Bearings
- From: Jim Fitch <jf@arn.net>
- Re: ATM Collimation Question
- From: "Jim Fly" <flyj@iol-12.net>
- Re: ATM Collimation Question
- From: "Jim Fly" <flyj@iol-12.net>
- RE: ATM Truss tube connectors
- From: Jim McKay <james.mckay@yale.edu>
- RE: ATM Truss tube connectors
- From: Jim McKay <james.mckay@yale.edu>
- RE: ATM Truss tube connectors
- From: Jim McKay <james.mckay@yale.edu>
- ATM New stepper motor from Oriental Motors
- From: Jim McKay <james.mckay@yale.edu>
- Re: ATM Powering secondary heaters
- From: Jim McKay <james.mckay@yale.edu>
- RE: ATM Odd behavior of stepping motor circuit
- From: "Jim Warner" <warners@bgcc.com>
- ATM Pitch Lap
- From: Jimmy LaFountain <lafountainj@sprintmail.com>
- ATM Pitch Lap
- From: Jimmy LaFountain <lafountainj@sprintmail.com>
- ATM S1C
- From: Jimmy LaFountain <lafountainj@sprintmail.com>
- ATM star test of 6"er
- From: JoAnn Nanof <jnanof@javanet.com>
- ATM Help interpreting star test
- From: JoAnn Nanof <jnanof@javanet.com>
- ATM using ronchi at the eyepiece
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Rochi
- From: JoAnn Nanof <jnanof@javanet.com>
- ATM Re: pulsing LED
- From: Joe Campbell <joe@esper.com>
- Re: ATM Folded Newtonians
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Coma and RFT designs
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Re: : The BIG Time
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Re: : The BIG Time
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Re: : The BIG Time
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Night Vision
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM CopyScope lens
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Re: Timewarp:
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM William Bell
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM How to make a heat coil fix your figure...
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Mathematical Model for Figuring Theory
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM star data sources
- From: "John D. Upton" <upton@austin.ibm.com>
- Re: ATM OSLO + Stellafane = ??????
- From: John Vogt <atmer@idt.net>
- ATM OT question
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM 1st mirror: 8
- From: Joshua White <mudge80@hotmail.com>
- ATM 9 point cell versus 36 point cell
- From: jherrero@inexpress.net (Juan Herrero)
- ATM PLOP inspired mirror correcting cell
- From: jherrero@inexpress.net (Juan Herrero)
- Re: ATM PLOP inspired mirror correcting cell
- From: jherrero@inexpress.net (Juan Herrero)
- Re: ATM PLOP inspired mirror correcting cell
- From: jherrero@inexpress.net (Juan Herrero)
- ATM Clausing's Mir-O-Bright coating ?
- From: jherrero@inexpress.net (Juan Herrero)
- ATM tde+bevels
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM RE: 12" refractor
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM Polishing Compounds Compared
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM RE: 12" refractor
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM Polishing Compounds Compared
- From: "k.honders" <k.honders@worldonline.nl>
- ATM night vision
- From: karen vanderhule <nitesite@lgcy.com>
- ATM pitch-cicles
- From: karen vanderhule <nitesite@lgcy.com>
- Re: RE: ATM determining resolving power.
- ATM CopyScope lens
- Re: ATM compressed air
- Re: ATM Babbit metal substitutions
- From: Ken Hunter <kb7h@cei.net>
- ATM OOPS
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Babbit metal substitutions
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Microscope eyepieces
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Powering secondary heaters
- From: Ken Hunter <kb7h@cei.net>
- ATM Optical Windows for CCDs
- From: lynchkj@erols.com (Kenn Lynch)
- ATM Satellites?
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Night Vision
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Night Vision
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM seeking address
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM polymer optical window
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM polymer optical window
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Night Vision
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Night Vision
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Night Vision
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Night Vision
- From: Kent Cheatham <cheatham@ionet.net>
- ATM bino separation distance
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Loaded questions about mirror cells
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Loaded questions about mirror cells
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Loaded questions about mirror cells
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Loaded questions about mirror cells
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Loaded questions about mirror cells
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Re: 8 to Great (& India mirrors)
- From: Kent Cheatham <cheatham@ionet.net>
- Re: Subject: Re: ATM Loaded questions about mirror cells
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Mylar & Vac-Scope
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Saran wrap and 2000 points
- From: Kent Cheatham <cheatham@ionet.net>
- ATM How did the epoxy come out on sonotube?
- From: Kent Cheatham <cheatham@ionet.net>
- Re: SV: ATM center dotting secondaries
- From: Kent Cheatham <cheatham@ionet.net>
- ATM JMI Mototrak III schematic?
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- ATM broke the 38" mirror blank
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM More info on broken 38"
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM flint glass
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM CopyScope lens
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM making maksutovs
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM Optics Programs
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM PLOP
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM casting tiles into a plaster tool
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM PLOP
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM Loaded questions about mirror cells
- From: "Larry Snyder" <ldsnyder@dcn.davis.ca.us>
- ATM Truss Dob: Secondary strut 'flowers'?
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Active mirror figure correction?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM casting tiles into a plaster tool
- From: les <lesh@frii.com>
- ATM Re: Tile Tool
- From: les <lesh@frii.com>
- Re: ATM Re: Tile Tool
- From: les <lesh@frii.com>
- Re: ATM Casting lead weight
- From: lesh <lesh@frii.com>
- ATM help!
- From: "li gu" <ysopt@hotmail.com>
- Re: ATM Another parabolizing stroke question
- Re: ATM Liquid Soap
- RE: ATM Another parabolizing stroke question
- Re: ATM Copy Scope
- Re: ATM Copy Scope
- Re: ATM Adding a Prism Diagoanal
- RE: ATM Another parabolizing stroke question
- RE: ATM Another parabolizing stroke question
- Re: SEC: UNCLASSIFIED RE: ATM Collimation Question
- Re: ATM Truss tube clamps
- Re: ATM Truss tube clamps
- Re: ATM Truss tube clamps
- Re: ATM Re: : The BIG Time
- QED vs ATM
- Re: ATM Polishing Compounds Compared
- Re: ATM truss clamps
- Re: ATM Night Vision
- ATM Optics for a good mirror
- ATM It this Crayford?
- RE: ATM It this Crayford?
- ATM Erectors revisited
- ATM Erectors revisited
- ATM lens cement
- ATM Filter glass mirror?
- Re: ATM It this Crayford?
- ATM Loaded questions about mirror cells
- Re: ATM Cable drive
- Re: ATM Loaded questions about mirror cells
- ATM Impossible power question?
- ATM Ball lens accuracy
- Re: ATM Loaded questions about mirror cells
- Re: ATM Loaded questions about mirror cells
- ATM Powers and EP types
- Re: ATM Loaded questions about mirror cells
- ATM Getting the point(s?)
- ATM No more questions.
- Re: ATM binocular dobsonian
- From: "Loren A. Busch" <LBusch@ix.netcom.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- Re: ATM Aussie grit and blank suppliers?
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM Testing optical flats
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM Cable drive
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: Re: ATM Truss tube connectors
- From: "Marc Mandel" <mmandel@usd.edu>
- Re: ATM Re: 8 to Great (& India mirrors)
- From: "Marc Mandel" <mmandel@usd.edu>
- Re: ATM center dotting secondaries
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- ATM Powering secondary heaters
- From: Mark Kaye <mark.kaye@sympatico.ca>
- ATM Epoxied Sonotube Question
- From: tyr2490@tyler.net (Mark Migura)
- ATM Epoxied Sonotube Question
- From: tyr2490@tyler.net (Mark Migura)
- ATM Epoxied Sonotube Question
- From: tyr2490@tyler.net (Mark Migura)
- ATM Question on In-Focus/Out-Focus Image
- From: tyr2490@tyler.net (Mark Migura)
- ATM My 10" Dob completed
- From: tyr2490@tyler.net (Mark Migura)
- ATM My 10" Dob completed
- From: tyr2490@tyler.net (Mark Migura)
- ATM Folded Newtonian article
- From: Mark Suchting <masuch@cia.com.au>
- ATM bino separation distance
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM using ronchi at the eyepiece
- From: Mark Suchting <masuch@cia.com.au>
- ATM telescoping truss tube group purchase
- From: "Mark Worthington" <mworth@ix.netcom.com>
- ATM telescoping truss tube group purchase
- From: "Mark Worthington" <mworth@ix.netcom.com>
- Update on ATM telescoping truss tube group purchase
- From: "Mark Worthington" <mworth@ix.netcom.com>
- Last call for ATM telescoping truss tube group purchase
- From: "Mark Worthington" <mworth@ix.netcom.com>
- ATM Correcting a depressed zone, interpeting Foucault shadows
- From: "Mark Yama" <myama@novell.uidaho.edu>
- ATM subscribed
- From: "Martin Trittelvitz" <glaswurm@hotmail.com>
- RE: ATM subscribed
- From: "Martin Trittelvitz" <glaswurm@hotmail.com>
- Re: ATM subscribed
- From: "Martin Trittelvitz" <glaswurm@hotmail.com>
- Re: ATM An $18.00 Null Test
- From: "Martin Trittelvitz" <glaswurm@hotmail.com>
- ATM q&d ota balance and 16" blank fever
- RE: ATM Loaded questions about mirror cells
- From: Maryann Arrien <marrien@computer.net>
- ATM atm list info
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Coma and RFT designs
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Coma and RFT designs
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Coma and RFT designs
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Help with Mel's drive
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: : The BIG Time
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: : The BIG Time
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM machine grinding strokes
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Night Vision
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM machine grinding strokes
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM machine grinding strokes
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Night Vision
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Night Vision
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Direct drive?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Direct drive?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM How long at 9 micron?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Truss Tubes - Flare Fittings are superb!
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Truss Tubes - Flare Fittings are superb!
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM couple questions...
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: RE: atm (Amateur Telescope Makers)]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM gear backlash in Alt. drive
- From: Mel Bartels <mbartels@efn.org>
- [Fwd: ATM Responsyn motor]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM New discussion??? Fouc. test errors
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Impossible power question?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Multi-Images
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM long-term lap preservation
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Loaded questions about mirror cells
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM long-term lap preservation
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM No more questions.
- From: Mel Bartels <mbartels@efn.org>
- Mel responds, was Re: ATM Ruling for Mel
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM No more questions. (OT)
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM O.T.-Repeat Messages
- From: Mel Bartels <mbartels@efn.org>
- Re: Is there a bug in the ATM archive search algorithm?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Thin glass blank & some questions
- From: Mel Bartels <mbartels@efn.org>
- ATM Pulsing LED
- From: Michael Coslo <mjc5@psu.edu>
- ATM Daisy Sight Conversion Project
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Daisy Sight Conversion Project
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Casting lead weight
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Casting lead weight
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Casting lead weight
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Casting lead weight
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Casting lead weight
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Re: : The BIG Time
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Undersized, overpriced bearings, was: The BIG Time
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Re: : The BIG Time
- From: Michael Coslo <mjc5@psu.edu>
- RE: Re: ATM Truss tube connectors
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM: Keep Polishing or Back to the old Grind?!
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM RE: Keep Polishing or Back to the old Grind?!
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM 10mm thick float glass
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Mirror grinding strokes
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Twelve inch
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Ruling for Mel
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Re: : The BIG Time
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Loaded questions about mirror cells
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM No more questions.
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Large Dobsonians With Good Eyepiece Positions
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM casting tiles into a plaster tool
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Babbit metal substitutions
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM "Glass giant of Palomar"
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM It this Crayford?
- From: Michael Gregory <mikeg@airmail.net>
- Re: ATM: Grinding to ROC
- From: Michael Lindner <mikel@att.net>
- Re: ATM Central zone for Couder mask
- From: Michael Lindner <mikel@att.net>
- Re: ATM Dobsonian design questions
- From: Michael Lindner <mikel@att.net>
- ATM Re: spider design
- From: Michael Lindner <mikel@att.net>
- ATM Looking for True Grit
- From: Michael Lindner <mikel@att.net>
- Re: ATM Casting lead weight: An alternative
- From: Michael Lindner <mikel@att.net>
- Re: ATM Re: : The BIG Time
- From: Michael Lindner <mikel@att.net>
- ATM Links
- From: Michael Lindner <mikel@att.net>
- Re: ATM S/W for generating couder masks?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Help!! OSLO LT ate my brain!!!!!!!!!!
- From: Michael Lindner <mikel@att.net>
- ATM Telescoping truss tubes
- From: Michael Lindner <mikel@att.net>
- Re: ATM Direct drive?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Mirror-making classes
- From: Michael Lindner <mikel@att.net>
- Re: ATM Night Vision
- From: Michael Lindner <mikel@att.net>
- Re: ATM Berry dimension modifications for 8"
- From: Michael Lindner <mikel@att.net>
- Re: ATM couple questions...
- From: Michael Lindner <mikel@att.net>
- ATM Kendrick Dew Controller
- From: Michael Lindner <mikel@att.net>
- Re: ATM couple questions...
- From: Michael Lindner <mikel@att.net>
- Re: ATM Telescoping truss tubes
- From: Michael Lindner <mikel@att.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Odd behavior of stepping motor circuit
- From: Michael Lindner <mikel@att.net>
- Re: ATM It this Crayford?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Tube Lenght
- From: Michael Lindner <mikel@att.net>
- Re: ATM New discussion??? Fouc. test errors
- From: Michael Lindner <mikel@att.net>
- Re: ATM determining resolving power.
- From: Michael Lindner <mikel@att.net>
- Re: ATM It this Crayford?
- From: Michael Lindner <mikel@att.net>
- Re: ATM It this Crayford?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Testing optical flats
- From: Michael Lindner <mikel@att.net>
- Re: ATM Nema 17 frame steppers....
- From: Michael Lindner <mikel@att.net>
- ATM Powering secondary heaters
- From: Michael Lindner <mikel@att.net>
- Re: ATM Solar telescope design
- From: Michael Lindner <mikel@att.net>
- Re: Is there a bug in the ATM archive search algorithm?
- From: Michael Lindner <mikel@att.net>
- Re: ATM William Bell
- From: Michael Lindner <mikel@att.net>
- Re: ATM OSLO / Stellafane Update
- From: Michael Lindner <mikel@att.net>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: Michael Lindner <mikel@att.net>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: Michael Lindner <mikel@att.net>
- ATM Re: Icarus (was "Would someone direct me to Michael Pankratz' design?")
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Sept issue / Pantratz
- From: Michael Pankratz <papilio1@juno.com>
- Re: Re[2]: ATM Optics Question from a Newbie
- From: Michael Pankratz <papilio1@juno.com>
- Re: Re[3]: ATM Optics Question from a Newbie
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Would someone direct me to Michael Pankratz' design?
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Would someone direct me to Michael Pankratz' design?
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Telescoping truss tubes
- From: Michael Pankratz <papilio1@juno.com>
- Re: AW: ATM Testing optical flats
- From: Michael Pankratz <papilio1@juno.com>
- ATM Clyde-O-Scope
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM An $18.00 Null Test
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM OSLO + Stellafane = ??????
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Book recommendations?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Coma and RFT designs
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Coma and RFT designs
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Would someone direct me to Michael Pankratz' design?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Help!! OSLO LT ate my brain!!!!!!!!!!
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Sept issue / Pantratz
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Sept issue / Pantratz
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Sept issue / Pantratz
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Re: 8 to Great (& India mirrors)
- From: Michael Peck <mpeck1@ix.netcom.com>
- Is there a bug in the ATM archive search algorithm?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Large Dobsonians With Good Eyepiece Positions
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Big Dobs w/ Good EP positions: another approach
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Big Dobs w/ Good EP positions: another approach
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM re: Motors
- From: "Michael Perata" <michaelp@p-solutions.com>
- ATM Spheres, Parabolas etc.
- From: "Michael Perata @ p-solutions" <michaelp@p-solutions.com>
- Re: ATM Re Sonotube in the UK
- From: "MICHAEL SALMON" <mike@oddlycalm.freeserve.co.uk>
- ATM FIne Collimation
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Optics for a good mirror
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM : Hole in the middle
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM compressed air
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Prism Diagonal
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM Tile problem
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM copy machine lenses into finder scope
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM Liquid Soap
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Coma and RFT designs
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Daisy Sight Conversion Project
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Tile problem
- From: Mike Coslo <mjc5@psu.edu>
- ATM Casting lead weight
- From: Mike Coslo <mjc5@psu.edu>
- ATM Casting done
- From: Mike Coslo <mjc5@psu.edu>
- ATM Casting done
- From: Mike Coslo <mjc5@psu.edu>
- ATM refractor question
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Mike Coslo <mjc5@psu.edu>
- ATM One benefit of silvering your own mirror
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM couple questions...
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM One benefit of silvering your own mirror
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Berry dimension modifications for 8"
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM One benefit of silvering your own mirror
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Night Vision
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM pitch-cicles
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM re: long term preservation of lap
- From: Mike Coslo <mjc5@psu.edu>
- Re: Subject: Re: ATM Loaded questions about mirror cells
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Loaded questions about mirror cells
- From: Mike Coslo <mjc5@psu.edu>
- Re: Subject: Re: ATM Loaded questions about mirror cells
- From: Mike Coslo <mjc5@psu.edu>
- Re: Subject: Re: ATM Loaded questions about mirror cells
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM : Hole in the middle
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Loaded questions about mirror cells
- From: Mike Coslo <mjc5@psu.edu>
- Re: Is there a bug in the ATM archive search algorithm?
- From: Mike Coslo <mjc5@psu.edu>
- ATM Help with Mel's drive
- From: Mike Fleenor <mfleenor@icx.net>
- ATM determining resolving power.
- From: Mike Fleenor <mfleenor@icx.net>
- Re: ATM How to make a heat coil fix your figure...
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Night Vision
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Daisy Sight Conversion Project
- From: Mike Reed <mreed@eai.com>
- Re: ATM Daisy Sight Conversion Project
- From: Mike Reed <mreed@eai.com>
- Re: ATM Daisy Sight Conversion Project
- From: Mike Reed <mreed@eai.com>
- Re: ATM Daisy Sight Conversion Project
- From: Mike Reed <mreed@eai.com>
- Re: ATM Collimation Question
- From: Mike Reed <mreed@eai.com>
- Re: ATM Star test collimation dilemma
- From: Mike Reed <mreed@eai.com>
- Re: ATM Night Vision
- From: Mike Reed <mreed@eai.com>
- Re: ATM Night Vision
- From: Mike Reed <mreed@eai.com>
- Re: ATM One benefit of silvering your own mirror
- From: Mike Reed <mreed@eai.com>
- Re: ATM Cad Programs
- From: Mike Reed <mreed@eai.com>
- Re: ATM Loaded questions about mirror cells
- From: Mike Reed <mreed@eai.com>
- Re: ATM Loaded questions about mirror cells
- From: Mike Reed <mreed@eai.com>
- Re: ATM 10" Problems
- From: Mike Reed <mreed@eai.com>
- Re: ATM compressed air
- From: Mike Reed <mreed@eai.com>
- Re: ATM Re: : The BIG Time
- Re: ATM Collimation
- Re: ATM / Increasing the emissivity of glass
- Re: ATM Night Vision
- Re: ATMing in the September Sky & Telescope
- Re: ATM Sept issue / Pantratz
- Re: ATM Loaded questions about mirror cells
- Re: ATM Re: : The BIG Time
- ATM RTVing Mirrors
- ATM First light -- first light
- From: mkoloski <mkoloski@oregonvos.net>
- Re: ATM Casting lead weight: An alternative
- From: Monty MaGill <103375.2444@compuserve.com>
- ATM Re: SIAR and all....
- From: Monty MaGill <103375.2444@compuserve.com>
- Re: ATM Eye relief
- From: more than meets the eye <meeteye@yahoo.com>
- ATM Motor
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Liquid Soap
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Cad Programs
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Tube Lenght
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- Re: ATM Cad Programs
- From: "N. Foldager" <nf@dadlnet.dk>
- ATM 18" f4.5 Mirror (0.015 RMS, 0.099 P-V, 0.992 Strehl) for sale
- From: "NetZero" <carl7@netzero.net>
- Re: ATM Daisy Sight Conversion Project
- Re: ATM Telescoping truss tubes
- Re: ATM Truss Tubes - Flare Fittings are superb!
- Re: ATM Truss Dob: Secondary strut 'flowers'?
- Re: ATM bino separation distance
- Re: ATM flint glass
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM flint glass
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM flint glass
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Glass removal with bench grinder wheel
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Glass removal with bench grinder wheel
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM SDI Mirror
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Re: Timewarp:
- From: Nick Martin <bonnyton@ednet.co.uk>
- ATM Sonotube in the UK
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Powering secondary heaters
- From: Nick Martin <bonnyton@ednet.co.uk>
- ATM Re Sonotube in the UK
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Collimation
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM help
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Collimation
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM It this Crayford?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Adjusting RA Tracking Rate Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Adjusting RA Tracking Rate Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM NEWT & a 13" F5 mirror
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Loaded questions about mirror cells
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Loaded questions about mirror cells
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Loaded questions about mirror cells
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM center dotting secondaries
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM casting tiles into a plaster tool
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Re:Photon wavefunctions
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Question on In-Focus/Out-Focus Image
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM truss clamps
- From: Olivier Biot <olivier@zeus.rug.ac.be>
- Re: ATM Clausing's Mir-O-Bright coating ?
- From: Olivier Guyon <oguyon@clipper.ens.fr>
- SV: ATM How to make a heat coil to reduce dew?
- From: "Olle Eriksson" <olle.eriksson@telia.com>
- ATM Gluing truss tubes and holes that are too large....
- From: "Olle Eriksson" <olle.eriksson@telia.com>
- SV: ATM Gluing truss tubes and holes that are too large....
- From: "Olle Eriksson" <olle.eriksson@telia.com>
- SV: ATM Dobsonian design questions
- From: "Olle Eriksson" <olle.eriksson@telia.com>
- ATM Help!! OSLO LT ate my brain!!!!!!!!!!
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- ATM OSLO + Stellafane = ??????
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- ATM OSLO / Stellafane Update
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- ATM Re:Photon wavefunctions
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- ATM Book recommendations
- From: "Patricia Malone" <patmalone@earthlink.net>
- Re: ATM Night Vision
- From: "Patricia Malone" <patmalone@earthlink.net>
- Re: ATM Kendrick Dew Controller
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM It this Crayford?
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- ATM 10mm thick float glass
- From: "Paul Forshaw" <paul@4shaw.freeserve.co.uk>
- RE: ATM Cutting aluminum rings
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Cutting aluminum rings
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Epoxied Sonotube Question
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Epoxied Sonotube Question
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Re: 8 to Great (& India mirrors)
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Re: 8 to Great (& India mirrors)
- From: Paul LeFevre <paull@lucasarts.com>
- RE: Mel responds, was Re: ATM Ruling for Mel
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM William Bell
- From: Paul LeFevre <paull@lucasarts.com>
- RE: Mel responds, was Re: ATM Ruling for Mel
- From: Paul LeFevre <paull@lucasarts.com>
- [ATM] Travelscope web site updated
- From: Paul LeFevre <paull@lucasarts.com>
- ATM Re: Open Sources: Virtual Spring Counterweighting (was: The BIG Time)
- From: Paul Shankland <pshankland@flakeysol.com>
- RE: ATM truss Clamps ***
- From: Paul Shankland <pshankland@flakeysol.com>
- ATM Re: Re: Open Sources Virtual Spring Counterweighting
- From: Paul Shankland <pshankland@flakeysol.com>
- Re: ATM Truss Tubes - Flare Fittings are superb!
- From: Paul Shankland <pshankland@flakeysol.com>
- Re: ATM Truss Tubes - Flare Fittings are superb!
- From: Paul Shankland <pshankland@flakeysol.com>
- ATM Twelve Inch Clivesonian
- From: Paul Shankland <pshankland@flakeysol.com>
- Re: RE: ATM couple questions...
- From: Paul Shankland <pshankland@flakeysol.com>
- RE: ATM Truss Dob: Secondary strut 'flowers'
- From: Paul Shankland <pshankland@flakeysol.com>
- ATM Re: atm-digest V1 #1715
- From: Paul Shankland <pshankland@flakeysol.com>
- ATM Re: atm-digest V1 #1715
- From: Paul Shankland <pshankland@flakeysol.com>
- ATM flint glass
- From: Pete Koziar <Pete_Koziar@compuserve.com>
- ATM Tech specs for eyepieces; was: RKE
- From: Peter Abrahams <telscope@europa.com>
- ATM binocular dobsonian
- From: Peter Abrahams <telscope@europa.com>
- Re: ATM Pulsing LED
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Re: pulsing LED
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Generator and El Cheapo diamond tooling
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Gluing truss tubes and holes that are too large....
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Gluing truss tubes and holes that are too large....
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM broke the 38" mirror blank
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Casting lead weight
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM vacuum vs ion beam coatings
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Direct drive?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Direct drive?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Where to find optical encoders
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM long-term lap preservation
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM pitch-cicles
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Generator and El Cheapo diamond tooling
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Generator and El Cheapo diamond tooling
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Casting lead weight
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: AW: ATM Testing optical flats - liquid reference.
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM 11.5" mystery glass
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM 11.5" mystery glass
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM 11.5" mystery glass
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM An $18.00 Null Test
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM An $18.00 Null Test
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM An $18.00 Null Test
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM OSLO + Stellafane = ??????
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Coma and RFT designs
- From: "Phil Marcus" <pmarcus@wt.net>
- Re: ATM Coma and RFT designs
- From: "Phil Marcus" <pmarcus@wt.net>
- ATM Polishing Compounds Compared
- From: "Phil Marcus" <pmarcus@wt.net>
- Re: ATM Testing of optical flats
- From: "Phil Marcus" <pmarcus@wt.net>
- ATM split ring mounts
- From: "Phillip Smith" <hapchap@bigpond.com>
- ATM How long at 9 micron?
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM gear backlash in Alt. drive
- From: PK6811S@ACAD.DRAKE.EDU
- RE: ATM It this Crayford?
- From: Randy Johnson <RJohnson@radarinc.com>
- RE: ATM It this Crayford?
- From: Randy Johnson <RJohnson@radarinc.com>
- ATM Folded Newtonians
- From: dosc@cswnet.com (RAYMOND A. DESMARAIS Jr.)
- Re: ATM Another parabolizing stroke question
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Another parabolizing stroke question
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM Another parabolizing stroke question
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Coma and RFT designs
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM Another parabolizing stroke question
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM Another parabolizing stroke question
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM Another parabolizing stroke question
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM broke the 38" mirror blank
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM classes and pitch laps (long)
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM New discussion??? Fouc. test errors
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM New discussion??? Fouc. test errors
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Loaded questions about mirror cells
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Loaded questions about mirror cells
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM No more questions. (OT)
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM An $18.00 Null Test
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM An $18.00 Null Test
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM An $18.00 Null Test
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- RE: ATM An $18.00 Null Test
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Feasibility of making a Ross null lens
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Generator and El Cheapo diamond tooling
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Plate Glass considerations
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Telescoping truss tubes
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Loaded questions about mirror cells
- From: Ricardo Dunna <rdunna@infolink.com.br>
- RE: ATM Another parabolizing stroke question
- From: "Richard Ozer" <rozer@ousd.k12.ca.us>
- ATM Mirror Makers needed on the USS Hornet
- From: "Richard Ozer" <rozer@ousd.k12.ca.us>
- ATM Figuring
- From: Richard Schwartz <richas@idt.net>
- Subject: Re: ATM Loaded questions about mirror cells
- From: Richard Schwartz <richas@idt.net>
- ATM Optical Flat
- From: Richard Schwartz <richas@idt.net>
- Subject: ATM No more questions.
- From: Richard Schwartz <richas@idt.net>
- ATM Mirror Flotation
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Active mirror figure correction?
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Truss tube clamps
- From: Richard Schwartz <richas@idt.net>
- Re: ATM PLOP inspired mirror correcting cell
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Thin glass blank & some questions
- From: Richard Schwartz <richas@idt.net>
- ATM Ignore - Mail Client Routing Test
- From: "Rick Manzie" <earth2peg51@lvcm.com>
- ATM Building a refractor for the masses...
- From: "Rick Towns" <rick@deepskies.com>
- ATM From Eight to Great
- From: Rob Teeter <webuser@thecore.com>
- RE: ATM Re: 8 to Great (& India mirrors)
- From: Rob Teeter <webuser@thecore.com>
- ATM Re - Admir from W.B.
- From: "robert allen" <rallen@iland.net>
- ATM : Hole in the middle
- From: "robert allen" <rallen@iland.net>
- ATM Thin glass blank & some questions
- From: Robert Der <rder@broadvision.com>
- RE: ATM Epoxied Sonotube Question
- From: Robert Santore <santore@ibm.net>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: Robert Santore <santore@ibm.net>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: Robert Santore <santore@ibm.net>
- Re: ATM help
- From: Rocky <wb5ftr@greatwhite.com>
- Re: AW: ATM Testing optical flats
- From: Rocky <wb5ftr@greatwhite.com>
- ATM couple questions...
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM Couple questions answered...
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM William Bell
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM Coma and RFT designs
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Tile Tools
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Pitch and Tile Tools
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Flint Glass
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: 12" refractor
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM RE: Tile Tools
- From: "Roger Herzler" <rherzler@cts.com>
- Re: ATM Night Vision
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM Night Vision
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM Night Vision
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM bino separation distance
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM New discussion??? Fouc. test errors
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM bino separation distance
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM Eye relief
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: Roger West <westr@cherokee.nsuok.edu>
- RE: ATM CopyScope lens
- From: "Rovelstad, Peder" <Peder.Rovelstad@standardregister.com>
- AW: ATM Testing optical flats
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- Re: ATM It this Crayford?
- From: Rudy Taraschi <rudy@cae.ca>
- Re: ATM It this Crayford?
- From: Rudy Taraschi <rudy@cae.ca>
- ATM "Glass giant of Palomar"
- From: Rudy Taraschi <rudy@cae.ca>
- ATM star data sources
- From: Rudy Taraschi <rudy@cae.ca>
- ATM motors
- From: Rudy Taraschi <rudy@cae.ca>
- Re[3]: ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- Re[4]: ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM Another Question from a Newbie--Mirror Figuring in the Cell
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Night Vision
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM polymer optical window
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM Re: Equatorial Mount
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM polymer optical window
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Re: Equatorial Mount
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM polymer optical window--Here's the transmission number...
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Direct drive?
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Night Vision
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Night Vision
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Twelve inch
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Twelve Inch Clivesonian
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: AW: ATM Testing optical flats
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Active mirror figure correction?
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM Large Dobsonians With Good Eyepiece Positions
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Large Dobsonians With Good Eyepiece Positions
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Large Dobsonians With Good Eyepiece Positions
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Large Dobsonians With Good Eyepiece Positions
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Big Dobs w/ Good EP positions: another approach
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Big Dobs w/ Good EP positions: another approach--Stevick Paul
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Big Dobs w/ Good EP positions: another approach--StevickPaul
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Eye relief
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM OSLO + Orange County = ??????
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM Spring counterweight problems
- From: "Scott Hahn" <HahnST@worldnet.att.net>
- Re: ATM Spring counterweight problems
- From: "Scott Hahn" <HahnST@worldnet.att.net>
- Re: ATM OSLO + Stellafane = ??????
- From: Scott Milligan <starzkey@ma.ultranet.com>
- Re: ATM polishing advice sought
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM pitch suppliers in Ventura co. or LA
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM An $18.00 Null Test
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Active mirror figure correction?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Anti reflection coatings and TDE (not related)
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Plate Glass considerations
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM polystyrene gears
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- No Subject
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM William Bell
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM OSLO + Stellafane = ??????
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM Kydex T vs. Kydex 100
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM Dobsonian design questions
- From: Shannon Hughes <sr.hughes@worldnet.att.net>
- ATM Berry dimension modifications for 8"
- From: Shannon Hughes <sr.hughes@worldnet.att.net>
- ATM Mirror grinding strokes
- From: Shannon Hughes <sr.hughes@worldnet.att.net>
- ATM OLD, UNUSED PITCH
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Mounting mirror
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Moon Scope
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Off Center Mask
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Venus Test
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM help
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM help
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM help
- From: starlord@qnet.com (Slc.Dennis Bishop)
- No Subject
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Turn Down Edge?
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Turn Down Edge?
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Off Topic: Titles,etc.
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM More Testing
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM last Tests
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM polymer optical window
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM polymer optical window
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Diagonal Mirror
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Night Vision
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Close but still not
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM mirror
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM ?
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Multi-Images
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Multi-Images
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Multi-Images
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Multi-Images
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Rochi
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Rochi
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Odd behavior of stepping motor circuit
- From: "Spencer Roedder" <roedder@roedder.com>
- Re: ATM Odd behavior of stepping motor circuit
- From: "Spencer Roedder" <roedder@roedder.com>
- Re: ATM Testing of optical flats
- From: "Spencer Roedder" <roedder@roedder.com>
- Re: ATM Re: : The BIG Time
- From: Spencer Roedder <roedder@roedder.com>
- ATM Followup on silicone advice
- From: Spencer Roedder <roedder@roedder.com>
- ATM Cable drive
- From: Spencer Roedder <roedder@roedder.com>
- Re: ATM Cable drive
- From: Spencer Roedder <roedder@roedder.com>
- ATM S/W for generating couder masks?
- ATM Grinding unequal size blanks
- ATM unequal size blanks: Thanks all
- Re: ATM Mirror-making classes
- ATM classes and pitch laps
- Re: ATM classes and pitch laps (long)
- Re: ATM Berry dimension modifications for 8"
- Re: ATM couple questions...
- Re: ATM firstmirror/big mirror?, was ATM couple??
- ATM activity around Knoxville TN???
- ATM New discussion??? Fouc. test errors
- Re: ATM New discussion??? Fouc. test errors
- Re: ATM Sept issue / Pantratz
- Re: ATM New discussion??? Fouc. test errors
- Re: ATM classes and pitch laps (long)
- Re: ATM Correcting a depressed zone, interpeting Foucault shadows
- Re: ATM Sept issue / Pantratz
- Re: ATM New discussion??? Fouc. test errors
- Re: ATM It this Crayford?
- Re: ATM It this Crayford?
- ATM Trepanning disks with PVC saws???
- Re: ATM Loaded questions about mirror cells
- Re: ATM William Bell
- Re: ATM William Bell
- Re: ATM casting tiles into a plaster tool
- Re: ATM Active mirror figure correction?
- Re: ATM Re: Tile Tool
- ATM Big Dobs w/ Good EP positions: another approach
- Re: ATM An $18.00 Null Test
- Re: ATM Big Dobs w/ Good EP positions: another approach
- Re: ATM Big Dobs w/ Good EP positions: another approach
- Re: ATM Big Dobs w/ Good EP positions: another approach--StevickPaul
- Re: ATM Big Dobs w/ Good EP positions: another approach
- Re: ATM New discussion??? Fouc. test errors
- From: "Suiter, Harold" <suiterhr@digitalexp.com>
- ATM Springs etc.
- From: Talbert Malone <TM85010@UAFSYSB.UARK.EDU>
- ATM Fiberglass Tube
- From: Talbert Malone <TM85010@UAFSYSB.UARK.EDU>
- ATM spider in the eye
- From: Talbert Malone <TM85010@UAFSYSB.UARK.EDU>
- ATM Eye relief
- From: Talbert Malone <TM85010@UAFSYSB.UARK.EDU>
- ATM Cable drive
- From: tg@utstat.toronto.edu
- Re: ATM Cutting aluminum rings
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM: Grinding to ROC
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Liquid Soap
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Liquid Soap
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM "J&R" crappy Celestron telescopes
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM classes and pitch laps
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Glass removal with bench grinder wheel
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Glass removal with bench grinder wheel
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM One benefit of silvering your own mirror
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Twelve Inch Clivesonian
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM determining resolving power.
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM casting tiles into a plaster tool
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Loaded questions about mirror cells
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Folded Gregorian
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Eye relief
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM re: Motors
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM 10" Problems
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM - Worm gear source?
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM What should I be seeing?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: : The BIG Time
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM Truss tube clamps
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Truss tube clamps
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Truss tube clamps
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM OT: Bright New Comet
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- Tempered Glass For ATMs??
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Loaded questions about mirror cells
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Re: Welcome and Orientation For Newbies
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- Re: ATM cutting pyrex
- From: Tim Walters <trwalters@mindspring.com>
- ATM Re: SCT mirror flop - how about shims?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM SCT mirror flop - how about shims?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Re: SCT mirror flop - how about shims?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Adding a fan to an SCT - some lessons learned
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM SCT baffling - what about off axis?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM SCT baffling - what about off axis?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Adding a fan to an SCT - some lessons learned
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM SCT baffling - what about off axis?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM SCT mirror flop - how about shims?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM star testing program
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM SCT mirror flop - how about shims?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Spring counterweight problems
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Off Topic: Heart of New Mexico Star Party 9-11 July
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: : ATM Building a refractor for the masses...
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Re: : The BIG Time
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Re: : The BIG Time
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Spring counterweights
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Spring counterweights
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Re: Open Sources: Virtual Spring Counterweighting (was: The BIG Time)
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Turn Down Edge?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM RE: 12" refractor
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Re: Measurement and elimination of PEC with sync motor drives
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Night Vision
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM small EQ mount ideas
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM small EQ mount ideas
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Night Vision
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM using DSC for polar alignment...
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Night Vision
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Twelve inch
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM couple questions...
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Loaded questions about mirror cells
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- No Subject
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Re: <no subject>
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM mirror cell and triple image
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM PLOP inspired mirror correcting cell
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM 20": first light
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM No more questions. (OT)
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM RTVing Mirrors
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Construction of Telrad
- From: "Tomas Maruska" <maruska@posam.sk>
- Re: ATM Your best shot.
- From: "Tomas Maruska" <maruska@posam.sk>
- Re: ATM Liquid Soap
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM flint glass
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Truss tube connectors
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Parts
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Re: Cleaning Teflon & Formica Bearings
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM bino separation distance
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM It this Crayford?
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Cable drive
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Threaded rod
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Threaded rod
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Threaded rod
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Threaded rod
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Threaded rod
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM threaded rod
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Re: Welcome and Orientation For Newbies
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Powering secondary heaters
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM One benefit of silvering your own mirror
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM Aussie grit and blank suppliers?
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM Collimation tool
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM Aussie grit and blank suppliers?
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM Microscope eyepieces
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM star data sources
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM Binocular Dobsonian
- From: "Victor Lange" <victor@promodel.com>
- RE: ATM Loaded questions about mirror cells
- From: "Victor Lange" <victor@promodel.com>
- ATM SDI Mirror
- From: "Victor Lange" <victor@promodel.com>
- RE: ATM SDI Mirror
- From: "Victor Lange" <victor@promodel.com>
- Re: ATM S/W for generating couder masks?
- Re: ATM ADMIR from W-B
- Re: ATM: Grinding to ROC
- ATM Tile problem
- Re: ATM Satellites?
- Re: ATM Casting lead weight: Source of lead
- Re: ATM Casting lead weight: An alternative
- ATM flint glass
- ATM Focuser completion
- Re: ATM 10mm thick float glass
- ATM Re: Focuser Question
- RE: ATM New discussion??? Fouc. test errors
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: AW: ATM Testing optical flats
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM An $18.00 Null Test
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM casting tiles into a plaster tool
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM An $18.00 Null Test
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM An $18.00 Null Test
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM OSLO + Stellafane = ??????
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Folded Gregorian
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM star data sources
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Anti reflection coatings and TDE (not related)
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- ATM Fresnel Lenses
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Eye relief
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Anti reflection coatings and TDE (not related)
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM broke the 38" mirror blank
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Truss tube connectors
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Truss tube connectors
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Truss tube connectors
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Night Vision
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- Re: ATM Night Vision
- From: "William E. Byrd" <web01@flash.net>
- Re: ATM Berry dimension modifications for 8"
- From: "William E. Byrd" <web01@flash.net>
- Re: ATM It this Crayford?
- From: "William E. Byrd" <web01@flash.net>
- ATM Stellafane Defense Fund
- From: "William E. Hemple" <hemple@erols.com>
- RE: ATM Optics for a good mirror
- From: "William E. Hemple" <hemple@erols.com>
- ATM How much?
- From: "William Prifti" <wprifti@capecod.net>
- ATM Focal length
- From: "Wouter van der Schagt" <frenzyr@writeme.com>
- Re: ATM Night Vision
- From: "WT-Net" <pmarcus@wt.net>
Mail converted by MHonArc 2.1.0