Amateur Telescope Makers (ATM) Archive for JUL98 - by author

• Thread Index

• ATM - Grinding Machine Strokes
  • From: "." <cjf@idirect.com>
• ATM Grinding Machine Strokes
  • From: "." <cjf@idirect.com>
• Re: ATM Mirror Coating in Europe
  • From: Achim Schaller <acschaller@geocities.com>
• ATM ultra thin optics
  • From: Adams <adams@rmci.net>
• Re: ATM ultra thin optics
  • From: Adams <adams@rmci.net>
• Re: ATM A Cage as Secondary Holder
  • From: Al Kelly <akelly@ghg.net>
• ATM Russians stoppt 'new moon'
  • From: "Alexander Urban" <urban@mpe.mpg.de>
• ATM:Russians stoppt 'new moon'
  • From: "Alexander Urban" <urban@mpe.mpg.de>
• ATM Newbie taking the plunge
  • From: Andrew Lin <alin@qualcomm.com>
• RE: ATM Baffling a newt - street light tests
  • From: Andrew.Martyn@dao.defence.gov.au
• Re: ATM: 4-Point Flotation Mirror Cell... Please explain.
  • From: Andrew.Martyn@dao.defence.gov.au
• ATM list archives updated for June 1998
  • From: "Andy Steere" <andy@www.system.missouri.edu>
• Re: ATM How to find indices of refraction and dispersion for glass
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Spider vanes
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Light Absorbing Coatings
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Re: Button molds
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM masking primary: how much?
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Not hard
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Building a spectrohelioscope
  • From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
• ATM Montréal TM Society Convention
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• Re: ATM Boy, this would sure suck
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• ATM Lurie-Houghton Corrector Material and questions
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• ATM Formica Mounting
  • From: "ArionDoug" <ariond1@carthage.edu>
• ATM re: atm-digest: Focuser Tube
  • From: "ArionDoug" <ariond1@carthage.edu>
• ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Art Russell <artrussell@mindspring.com>
• ATM 6" Equatorial GEQ
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Smaller f/ration
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Contacting
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM diagonal
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Lenses
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Diagonal
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Lenses
  • From: "Asaf S.-T." <asafs@ibm.net>
• Re: ATM Diagonal
  • From: "Asaf S.-T." <asafs@ibm.net>
• Re: ATM Lenses
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Not hard
  • From: "Asaf S.-T." <asafs@ibm.net>
• Re: ATM Diagonal
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Comet 1866 I
  • From: "Asaf S.-T." <asafs@ibm.net>
• Re: ATM Comet 1866 I
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Diagonal sketches
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM 6" f/8
  • From: "Asaf S.-T." <asafs@ibm.net>
• ATM Astronomy Archive in August 1998
  • From: "astro-archive" <astro-archive@inside.net>
• Re: ATM Journal and OSLO Lt.
  • From: Atmj1@aol.com
• Re: ATM Which book to buy?
  • From: bagheera <bagheera@worldnet.att.net>
• Re: ATM Comet 1866 I
  • From: bagheera <bagheera@worldnet.att.net>
• ATM Stepper motor for equatorial platform
  • From: Balaji Ramani <balajir@paul.rutgers.edu>
• Re: ATM Galileo Telescope Makers
  • From: Balaji Ramani <balajir@paul.rutgers.edu>
• RE: ATM Ready to Polish?
  • From: "Bass, Bill" <bbass@LibertyCorp.com>
• RE: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "Bass, Bill" <bbass@LibertyCorp.com>
• Re: Fw: ATM Slightly off topic- Moon viewings
  • From: "Benoit Schillings" <benoit@be.com>
• Re: Fw: ATM Slightly off topic- Moon viewings
  • From: "Benoit Schillings" <benoit@be.com>
• Re: ATM AO and Youngs Modulus for glass
  • From: "Benoit Schillings" <benoit@be.com>
• ATM re: OSLO Lt
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM Which book to buy?
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: Fw: ATM Slightly off topic- Moon viewings
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: ATM Cleaning mirror before coating
  • From: "Bill Prewitt" <bprewitt@neo.lrun.com>
• Re: ATM Your help needed
  • From: Bob Lombardi <blombard@iu.net>
• RE: ATM parabolizing
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM parabolizing-
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM parabolizing-long
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Rough Focal Length Testing Question
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Slightly off topic- Moon viewings
  • From: BOB PRABOWO <BOB@bahana.co.id>
• ATM RE: Focal length adjustment.
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM RE: Focal length adjustment.
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Sawing pitch channels
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM eq platforms
  • From: BOB PRABOWO <BOB@bahana.co.id>
• ATM Figuring
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Testing for fine grinding
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Pitch poured - Now What
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Not hard
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Diagonal
  • From: BOB PRABOWO <BOB@bahana.co.id>
• Re: ATM Curious about Central Obstruction Determinations
  • From: BodyByJay@aol.com
• ATM Band Rejection Mirrors
  • From: BodyByJay@aol.com
• ATM Light Absorbing Coatings
  • From: BodyByJay@aol.com
• ATM Mat paint & reflective surfaces in baffling
  • From: BodyByJay@aol.com
• ATM Roller driven GEM
  • From: Brad Davy <bdavy@fred.net>
• ATM Attn: Oregonians re event this weekend
  • From: Brand <huntb@ucs.orst.edu>
• ATM A question about Foucault testers
  • From: Brandon Mathew <brandon@core.rose.hp.com>
• Re: ATM A question about Foucault testers
  • From: Brandon Mathew <brandon@core.rose.hp.com>
• ATM Building scope mounting rings?
  • From: "Brant Katkansky" <bmk@pobox.com>
• Re: ATM Proportion of under/over correction
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Summer heat - two problems
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM RELAY LENSES
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Silver coatings
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM re: OSLO Lt
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Boy, this would sure suck
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM re: OSLO Lt
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM POSITIVE RELAY LENS AND OSLO LT.
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Analysis of Nasmyth/Cass in OSLO Lt
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Visual representation of grinding/polishing wear
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM Re: atm-digest V1 #1241
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Brent Hutto <BHutto@InfoAve.Net>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Brent Hutto <BHutto@InfoAve.Net>
• ATM Attaching Spider and Primary cell to a Square Tube
  • From: Brent Hutto <BHutto@InfoAve.Net>
• Re: ATM Paraboloids for Pyros (was Focal Length Checking)
  • From: Brent Russell <brussel@global.co.za>
• Re: ATM Bubble trouble - final follow up
  • From: Brent Russell <brussel@global.co.za>
• Re: ATM Curious about Central Obstruction Determinations
  • From: Brent Russell <brussel@global.co.za>
• Re: ATM Sub-diameter tools?
  • From: Brent Russell <brussel@global.co.za>
• Re: ATM Sub-diameter tools?
  • From: Brent Russell <brussel@global.co.za>
• Re: ATM cad program
  • From: Brian Dodge <bdodge@acpub.duke.edu>
• Re: ATM Geographical info
  • From: Brian Dodge <bdodge@acpub.duke.edu>
• Re: ATM mounting of binocular for finder scope
  • From: Brian Nestel <blast@aloha.net>
• Re: Fw: ATM Re: Meade DS-16 mount
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Slightly off topic- Moon viewings
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Slightly off topic- Moon viewings
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Fw: Dovetail Aluminum Bar Stock Source???
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Re: Dovtail source
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Formica Mounting
  • From: Brian Nestel <blast@aloha.net>
• ATM Astronomy Yellow Pages on the WWW
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Astronomy Yellow Pages on the WWW
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM eq platforms
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM eq platforms
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Boy, this would sure suck
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Lenses
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Boy, this would sure suck
  • From: Brian Nestel <blast@aloha.net>
• ATM simple refractor
  • From: brush11@juno.com (Brian Rush)
• RE: An ATM Program
  • From: "Bruce Sayre" <sayre@foothill.net>
• RE: ATM Saga of the moving laser dot
  • From: "Bruce Sayre" <sayre@foothill.net>
• re: ATM cad program
  • From: btk@pacbell.net
• Re: ATM BIG MAK?
  • From: btk@pacbell.net
• Re: ATM Lurie-Houghton Corrector Material and questions
  • From: btk@pacbell.net
• ATM Sawing pitch channels
  • From: Buck Childers <buckchil@sound.net>
• ATM Using sub-diam tools
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Sawing pitch channels
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Ready to Polish?
  • From: Buck Childers <buckchil@sound.net>
• ATM stepper motors
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM paint clean-up from skin
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Dental stone, etc. specs
  • From: Buck Childers <buckchil@sound.net>
• ATM Visual representation of grinding/polishing wear
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Visual representation of grinding/polishing wear
  • From: Buck Childers <buckchil@sound.net>
• ATM Pitch Lap woes
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Attaching Spider and Primary cell to a Square Tube
  • From: Buck Childers <buckchil@sound.net>
• ATM help
  • From: CaptKangru@aol.com
• ATM Stiffness of Aluminum vs. Plywood
  • From: Carl Woebcke <carlw@telis.org>
• ATM STIFFNESS of PLYWOOD vs. ALUMINUM
  • From: Carl Woebcke <carlw@telis.org>
• RE: ATM cad program
  • From: "Cecce, Anthony J" <CecceAJ@corning.com>
• Fw: ATM Proportion of under/over correction
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Paraboloids for Pyros (was Focal Length Checking)
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Re: Meade DS-16 mount
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• ATM mounting of binocular for finder scope
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• ATM Proportion of under/over correction
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Slightly off topic- Moon viewings
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Slightly off topic- Moon viewings
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Re: ATM Slightly off topic- Moon viewings
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• ATM Fw: Dovetail Aluminum Bar Stock Source???
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Cleaning mirror before coating
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• ATM Re: Focal length adjustment.
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Slightly off topic- Moon viewings
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Sawing pitch channels
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Grinding Machine Strokes
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM paint clean-up from skin
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Nearsighted focus w/ Barlow
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• Fw: ATM Diagonal
  • From: "Charles Hovatter" <charleshovatter@acelink.net>
• ATM Out of town
  • From: Chasdurham@aol.com
• No Subject
  • From: "Chris Standing" <cstanding@boo.net>
• Re: ATM cad program
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Curious about Central Obstruction Determinations
  • From: Chuck Dethloff <telmor@teleport.com>
• ATM Platforms
  • From: cshaw@ghg.net (Chuck Shaw)
• ATM Platform URL
  • From: "Chuck Shaw" <cshaw@ghg.net>
• RE: ATM Eq. Platforms - Dec Axis Tweaks?
  • From: cshaw@ghg.net (Chuck Shaw)
• Re: ATM A cage as secondary holder
  • From: cshaw@ghg.net (Chuck Shaw)
• Re: ATM eq platforms
  • From: cshaw@ghg.net (Chuck Shaw)
• Re: ATM Full Moon Observing
  • From: claudio minutella <minutella@tic.ch>
• ATM Reticules
  • From: Clint <cwhitman@gte.net>
• Re: ATM Slightly off topic- Moon viewings
  • From: Clint Bach <clintbach@earthlink.net>
• Re: ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Equatorial Platforms
  • From: "Clive" <milnecd@wantree.com.au>
• Re: Re[2]: ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Re:Moon and Polarizing filters (shortish)
  • From: "Clive" <milnecd@wantree.com.au>
• ATM Silicone Oil
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Silicone Oil
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM [Fwd: [ASTRO] Mason Dixon Star Party]
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM: TDE Bevel-out progress
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM ultra thin optics
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM ultra thin optics
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Cleaning mirror before coating
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Ready to Polish?
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM stepper motors
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Nextel Mat paint
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Sawing pitch channels
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM occultation bar
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Nextel Mat paint
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Mat paint & reflective surfaces in baffling
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM re: OSLO Lt
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Saga of the moving laser dot
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Help with VB controller program
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Ten Cent Pitch Tester
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM Making your Lap Hard
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM re: OSLO Lt
  • From: "Clive" <milnecd@wantree.com.au>
• Re: ATM 6" Dob: How Easy?
  • From: "Clive Milne" <milnecd@wantree.com.au>
• ATM Curious about Central Obstruction Determinations
  • From: Cmgcompany@aol.com
• Re: ATM Curious about Central Obstruction Determinations
  • From: Cmgcompany@aol.com
• ATM Dob Driver II Need Wireing Diagram or Web Page
  • From: Cmgcompany@aol.com
• ATM C14 electronics. Need some questions answered.
  • From: Cmgcompany@aol.com
• ATM Still Seeking Info on the C14 Electronics/Motors
  • From: Cmgcompany@aol.com
• Re: ATM Coatings and fireworks
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Curious about Central Obstruction Determinations
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Re: Meade DS-16 mount
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Spider vanes
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM TDE = > diffraction?
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM plane crazy
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• RE: ATM cad program
  • From: Dan Wilder <Dan.Wilder@digital.com>
• Re: ATM Which book to buy?
  • From: "Danie Malan" <DGM@it.sun.ac.za>
• Re: ATM Curious about Central Obstruction Determinations
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM A Cage as Secondary Holder
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM refrigerator
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM plane crazy
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Lots of fireworks Alumininzing - Now a BLACK coating!
  • From: "Daryl P. Dacko" <mycrump@cris.com>
• Re: ATM Blacken bevel?
  • From: Dave and Sherry Trahan <strahan@umd5.umd.edu>
• ATM: Source of small mirrors
  • From: Dave Gill <dpgill@raex.com>
• Re: ATM Coating thin mirrors
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Silicone Oil
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Silicone Oil
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Pitch test ?
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM plane crazy
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Attaching Spider and Primary cell to a Square Tube
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Galileo Telescope Makers
  • From: "David H. Bevel" <davebevel@mindspring.com>
• ATM True Grit: Fine Tuning 30" Grinding Machine
  • From: "David Lilly" <dhl@sprynet.com>
• Re: ATM Lenses
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Curious about Central Obstruction Determinations
  • From: David Simons <ysimons@yahoo.com>
• Re: ATM re:OPTICAST
  • From: David Simons <ysimons@yahoo.com>
• Re: ATM simple refractor
  • From: David Simons <ysimons@yahoo.com>
• Re: ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: David Simons <ysimons@yahoo.com>
• FW: ATM Pitch test ?
  • From: David Stansberry <Davidsta@cannet.com>
• ATM pitch tester
  • From: David Stansberry <Davidsta@cannet.com>
• Re: ATM Sawing pitch channels
  • From: David.Schuh@stn.siemens.com
• ATM Help with VB controller program
  • From: "DAWIE BOTES - STUDENT" <DAWIEB@wwg3.uovs.ac.za>
• ATM Viewing the moon's aerial image - off topic
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Few: Dovetail Aluminum Bar Stock Source???
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Silver coatings
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Lenses
  • From: Del Stanton <sd20@earthlink.net>
• ATM I lost incoming e-mail question about lenses
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM plane crazy
  • From: Dennis Rech <junkman@olywa.net>
• ATM Quickcam Suppliers
  • From: Derek Maskell <skyman@globalnet.co.uk>
• RE: Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Don Loftus <dloftus@edu15.coe.ufl.edu>
• ATM Silver coatings
  • From: DON morrison <donjenny@senet.com.au>
• Re: ATM Nextel Mat paint
  • From: Donald Clement <clement@commquest.com>
• Re: ATM Nextel Mat paint
  • From: Donald Clement <clement@commquest.com>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: Donald Clement <clement@commquest.com>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: Donald Clement <clement@commquest.com>
• Re: ATM Backlash in sprockets vs. gears
  • From: Donald Clement <clement@commquest.com>
• Re: ATM Finding McMaster-Carr catalogs
  • From: dmacrae@uconect.net (Donald MacRae)
• ATM Cleaning an old 8 inch Mead SC scope
  • From: Douglas Gourlay <dlg@worldchat.com>
• Re: ATM: Source of small mirrors
  • From: DP Gill <dpgill@raex.com>
• Re: ATM Help w/ Older Meade Clock Drive
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM Sawing pitch channels
  • From: DROWESMI@aol.com
• Re: ATM Stepper motor for equatorial platform
  • From: DROWESMI@aol.com
• Re: ATM Summer heat - two problems
  • From: DROWESMI@aol.com
• Re: ATM Sixteen inch - progress report
  • From: DROWESMI@aol.com
• Re: ATM Pitch test ?
  • From: DROWESMI@aol.com
• ATM DC Servo Motors
  • From: DROWESMI@aol.com
• ATM From the Archives - Friction Drive Mounts
  • From: DROWESMI@aol.com
• Re: ATM Rough patch on edge of blank
  • From: DROWESMI@aol.com
• Re: ATM Help w/ Older Meade Clock Drive
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Curious about Central Obstruction Determinations
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Curious about Central Obstruction Determinations
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM How to find FL of eyepeices?
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Re: Meade DS-16 mount
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Roller driven GEM
  • From: Dwight Elvey <elvey@hal.com>
• RE[2]: ATM parabolizing-long
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Slightly off topic- Moon viewings
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: Fw: ATM Slightly off topic- Moon viewings
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Slightly off topic- Moon viewings
  • From: Dwight Elvey <elvey@hal.com>
• ATM laser interferometers
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Silicone Oil
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Cleaning mirror before coating
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Figuring
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Saga of the moving laser dot
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Nearsighted focus w/ Barlow
  • From: Dwight Elvey <elvey@hal.com>
• RE: ATM A question about Foucault testers
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Pitch test ?
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Dental stone, etc. specs
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Determining focal length of negative lenses
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Lenses
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM masking primary: how much?
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM A Cage as Secondary Holder
  • From: Dwight Elvey <elvey@hal.com>
• Re[4]: ATM A Cage as Secondary Holder
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Diagonal
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Lenses
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Diagonal
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Diagonal sketches
  • From: Dwight Elvey <elvey@hal.com>
• ATM amount of cerium oxide
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Backlash in sprockets vs. gears
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Backlash in sprockets vs. gears
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM: Source of small mirrors
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM 6" f/8
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM ultra thin optics
  • From: "Ed Hood" <aes@southwind.net>
• Re: ATM ultra thin optics
  • From: "Ed Hood" <aes@southwind.net>
• Re: ATM Lots of fireworks Alumininzing - Now a BLACK coating!
  • From: Ed Rosch <earosch@home.com>
• ATM Planetary Newtonian
  • From: Ed Rosch <earosch@home.com>
• Re: ATM Planetary Newtonian
  • From: Ed Rosch <earosch@home.com>
• ATM Mirror Coating in Europe
  • From: elfe@bigfoot.com (Elfe)
• Re: ATM re:Eq. platforms
  • From: Eli Vandevoorde <elivv@efn.org>
• ATM Disk crash - lost sites.
  • From: Eli Vandevoorde <elivv@efn.org>
• ATM: Focal length adjustment.
  • From: Eli Vandevoorde <elivv@efn.org>
• ATM Warped sonotube
  • From: "Emil Johnsen" <emiljo@hl.telia.no>
• RE: ATM Planetary Newtonian
  • From: "Emil Johnsen" <emiljo@hl.telia.no>
• ATM God™ exists: I got a McMaster-Carr catalog
  • From: Fabio Pettinati <Fabio.Pettinati@vsisinc.com>
• ATM Address for E & W Optical
  • From: Fabio Pettinati <Fabio.Pettinati@vsisinc.com>
• RE: ATM Saga of the moving laser dot
  • From: "Fields, Jonathan A." <FIELDSJ@coned.com>
• RE: ATM Pitch test ?
  • From: "Fields, Jonathan A." <FIELDSJ@coned.com>
• RE: ATM Baffling the 16" f/6 secondary cage
  • From: "Fields, Jonathan A." <FIELDSJ@coned.com>
• ATM Glass blanks
  • From: "G.Ravindra Aradhya." <girish07@blr.vsnl.net.in>
• Re: ATM Light Absorbing Coatings
  • From: Gary Heiner <glheiner@pacbell.net>
• ATM Which book to buy?
  • From: Gary Manning <glm@ns.net>
• ATM Sources for good 8" mirrors
  • From: Gary Manning <glm@ns.net>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Curious about Central Obstruction Determinations
  • From: Gene Horr <genehorr@swbell.net>
• Re: ATM mounting of binocular for finder scope
  • From: Gene Horr <genehorr@swbell.net>
• Re: ATM Fw: Dovetail Aluminum Bar Stock Source???
  • From: Gene Horr <genehorr@swbell.net>
• ATM Mirror coating info in Australia
  • From: "Geoff Dudley" <gdudley@swin.edu.au>
• ATM (Fwd) lighting up Quebec, slightly off topic
  • From: "Geoff Dudley" <gdudley@swin.edu.au>
• ATM Astro Optical phone number correction..oops!
  • From: "Geoff Dudley" <gdudley@swin.edu.au>
• ATM Re: Sub diameter tools- 16" parabolizing question
  • From: "Geoff Dudley" <gdudley@swin.edu.au>
• ATM Testing for fine grinding
  • From: "George Pentsas" <pena@otenet.gr>
• ATM Geographical info
  • From: Georgios Pentsas <pena@otenet.gr>
• RE: ATM cad program
  • From: Gert Jan Verhoog <gerti@xs4all.nl>
• ATM oppose the russian moon. (was: boy, this would suck)
  • From: Gert Jan Verhoog <gerti@xs4all.nl>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: Gilles Gariepy <ggariepy@axess.com>
• Re: ATM Slightly off topic- Moon viewings
  • From: Gray-Spence <hibiscus@taunet.net.au>
• ATM Slightly off topic- Moon viewings
  • From: Gray-Spence <hibiscus@taunet.net.au>
• Re: ATM Boy, this would sure suck
  • From: "Greg Babcock" <gregb@iccom.com>
• Re: ATM Cleaning mirror before coating
  • From: Greg Furtman <gfurtman@spacestar.net>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: Greg Furtman <gfurtman@spacestar.net>
• ATM: Hurst gearhead step motors
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Greg Troutman <mor@crl.com>
• ATM AO and Youngs Modulus for glass
  • From: GregJ888@aol.com
• Re: ATM AO and Youngs Modulus for glass
  • From: GregJ888@aol.com
• Re: ATM AO and Youngs Modulus for glass
  • From: GregJ888@aol.com
• Re: ATM AO and Youngs Modulus for glass
  • From: GregJ888@aol.com
• Re: ATM Lurie-Houghton Corrector Material and questions
  • From: GregJ888@aol.com
• Re: ATM How to find indices of refraction and dispersion for glass
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM How to find indices of refraction and dispersion for glass
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM 6" Equatorial GEQ
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM How to find indices of refraction and dispersion for glass
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Re: Meade DS-16 mount
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM [Fwd: [ASTRO] Mason Dixon Star Party]
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Sawing pitch channels
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• ATM index of refraction
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM eq platforms
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM eq platforms
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Journal and OSLO Lt.
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM masking primary: how much?
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Boy, this would sure suck
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Boy, this would sure suck
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Comet 1866 I
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: Guy Richardson <g.richardson@surrey.ac.uk>
• Re: ATM eq platforms
  • From: HERNANDEZ DELGADO <herdel@sol.racsa.co.cr>
• Fw: ATM Slightly off topic- Moon viewings -Reply
  • From: HERVEY LEMAY <HJL@segalco.com>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: HERVEY LEMAY <HJL@segalco.com>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: HERVEY LEMAY <HJL@segalco.com>
• re:RE: ATM Re: Meade DS-16 mount
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM Re: Meade DS-16 mount
  • From: "Howard Banich" <Howard.Banich@nike.com>
• ATM re:Eq. platforms
  • From: "Howard Banich" <Howard.Banich@nike.com>
• ATM re:Eq. platforms
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:SV: ATM re:Eq. platforms
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Re: Eq Platforms
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM re:Eq. platforms
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Neophyte Polishing
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Slightly off topic- Moon viewings
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Formica Mounting
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Saga of the moving laser dot
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Equatorial platform for a lunar/planetary Newton?
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM Table Mountain
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Pitch Lap woes
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Was it M31?
  • From: "Howard Banich" <Howard.Banich@nike.com>
• ATM Proportion of under/over correction
  • From: Hugues_Laroche@aia.com
• Re: ATM blue brown haze after aluminzing.
  • From: Hugues_Laroche@aia.com
• Re: ATM Beveling out turned edge
  • From: Hugues_Laroche@aia.com
• ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: Hugues_Laroche@aia.com
• Re: ATM Proportion of under/over correction
  • From: Hugues_Laroche@aia.com
• Re: ATM Sawing pitch channels
  • From: Hugues_Laroche@aia.com
• Re: ATM occultation bar
  • From: Hugues_Laroche@aia.com
• Re: ATM Smaller f/ration
  • From: Hugues_Laroche@aia.com
• Re: ATM eq platforms
  • From: Hugues_Laroche@aia.com
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: Hugues_Laroche@aia.com
• Re: ATM Not hard
  • From: Hugues_Laroche@aia.com
• Re: ATM Comet 1866 I
  • From: Hugues_Laroche@aia.com
• Re: ATM How to find FL of eyepeices?
  • From: "Igor G. Rozivika" <igor@kuzi.sbor.spb.su>
• Re: ATM Grinding Machine Strokes
  • From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
• Re: ATM Grinding Machine Strokes
  • From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
• ATM Kerr's phone number
  • From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
• ATM Using dental plaster
  • From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
• Re: ATM Dental Plaster
  • From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
• Re: ATM the big one SO AM I!
  • From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
• Re: ATM Judging quality of flat secondary
  • From: iss@pvtnetworks.net
• Re: ATM Curious about Central Obstruction Determinations
  • From: iss@pvtnetworks.net
• Re: ATM solar projection
  • From: iss@pvtnetworks.net
• RE: ATM Re: Meade DS-16 mount
  • From: iss@pvtnetworks.net
• Re: ATM Roller driven GEM
  • From: iss@pvtnetworks.net
• Re: ATM Light Absorbing Coatings
  • From: iss@pvtnetworks.net
• Re: ATM EQ Platform stability (was: Meade DS-16 mount)
  • From: iss@pvtnetworks.net
• Re: Fw: ATM Slightly off topic- Moon viewings
  • From: iss@pvtnetworks.net
• Re: ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: iss@pvtnetworks.net
• Re: ATM Cleaning mirror before coating
  • From: iss@pvtnetworks.net
• Re: ATM Eq. Platforms - Dec Axis Tweaks?
  • From: iss@pvtnetworks.net
• Re: ATM Kendrick's Quik Focus
  • From: iss@pvtnetworks.net
• Re: ATM A cage as secondary holder
  • From: iss@pvtnetworks.net
• Re: ATM A cage as secondary holder
  • From: iss@pvtnetworks.net
• Re: ATM A cage as secondary holder
  • From: iss@pvtnetworks.net
• Re: ATM Baffling the 16" f/6 secondary cage
  • From: iss@pvtnetworks.net
• Re: ATM Not hard
  • From: iss@pvtnetworks.net
• Re: ATM Not hard
  • From: iss@pvtnetworks.net
• Re: ATM Blacken bevel?
  • From: iss@pvtnetworks.net
• Re: ATM refrigerator
  • From: iss@pvtnetworks.net
• Re: ATM Backlash in sprockets vs. gears
  • From: iss@pvtnetworks.net
• Re: ATM: Source of small mirrors
  • From: iss@pvtnetworks.net
• ATM Re: Meade DS-16 mount
  • From: J Stephen Jones <jsjones@rust.net>
• Re: ATM half stepping
  • From: jerry@cts4.europe.dg.com (j.royston)
• ATM Figuring/testing sixteen inch
  • From: Jack Schmidling <arf@mc.net>
• ATM Fast Scopes, was Figuring testing 16"...
  • From: Jack Schmidling <arf@mc.net>
• RE: ATM Re: Meade DS-16 mount
  • From: "James F. Heilman" <heilman@netside.com>
• re:RE: ATM Re: Meade DS-16 mount
  • From: "James F. Heilman" <heilman@netside.com>
• ATM Lost URL
  • From: "James L. Marino" <jmarino1@inreach.com>
• ATM Re:atm cad program-Rhinocad 3D
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re McMaster-Carr cd
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re: Dovtail source
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re: Aluminium vs ply
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• re:ATM Backlash in sprockets vs. gears
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re:sourse of small mirrors
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• Re: ATM Proportion of under/over correction
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• RE: ATM parabolizing-long
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Slightly off topic- Moon viewings
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Figuring
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Hartmann Testing for Amateurs
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Re: Non-member submission from [Michael Robinson <thomrob@hot1.net>]]
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM ZIP Drive & Multipass Foucault Tester
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Visual representation of grinding/polishing wear
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Poorman's Caustic test
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Data Reduction for Poorman's Caustic Test.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM etching a perspex reticle
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Eq platform
  • From: "Jean Marc Becker" <Jean-Marc.becker@wanadoo.fr>
• Re: ATM eq platforms
  • From: "Jean Marc Becker" <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM eq platforms
  • From: "Jean Marc Becker" <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM eq platforms
  • From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
• Re: SV: ATM eq platforms
  • From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM eq platforms
  • From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM Full Moon Observing
  • From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM Disk crash - lost sites.
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Disk crash - lost sites.
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM masking primary: how much?
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM First Big Star Party (Table Mountain)
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re: ATM: Source of small mirrors
  • From: Jeff Medkeff <medkeff@c2i2.com>
• re:Re: ATM Table Mountain
  • From: Jeff Medkeff <medkeff@c2i2.com>
• ATM 1.25" vs 2" diagonal on refractor
  • From: "Jeff Wirs" <jwirs@verinet.com>
• ATM Barlow question
  • From: jeff.martin@ccmail.wpcorp.com.au
• Re: ATM Mirror Coating Time
  • From: jeff.martin@ccmail.wpcorp.com.au
• Re: ATM Slightly off topic- Moon viewings
  • From: "Jeffery C. Hudson" <jhudson@inreach.com>
• ATM NW Ohio
  • From: "Jerry Rhodes" <jlrhod@bright.net>
• ATM Re: Eq Platforms
  • From: Jim Cooper <jim@jlcooper.com>
• ATM Re:Moon and Polarizing filters (shortish)
  • From: Jim Cooper <jim@jlcooper.com>
• Re: ATM Boy, this would sure suck
  • From: Jim Cooper <jim@jlcooper.com>
• ATM Poorman's Caustic test
  • From: Jim Fitch <jf@arn.net>
• Re: ATM side-supports of mirrors
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM cad program
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Jim Girard <argo@teleport.com>
• Re: ATM Re: Meade DS-16 mount
  • From: Joe Castoro <astrojoe@erols.com>
• Re: ATM Re: Meade DS-16 mount
  • From: Joe Castoro <astrojoe@erols.com>
• Re: ATM Re: Meade DS-16 mount
  • From: Joe Castoro <astrojoe@erols.com>
• Re: Fw: ATM Re: Meade DS-16 mount
  • From: Joe Castoro <astrojoe@erols.com>
• Re: ATM Re: Meade DS-16 mount
  • From: Joe Castoro <astrojoe@erols.com>
• Re: ATM EQ Platform stability (was: Meade DS-16 mount)
  • From: Joe Castoro <astrojoe@erols.com>
• Re: ATM [Fwd: [ASTRO] Mason Dixon Star Party]
  • From: Joe Castoro <astrojoe@erols.com>
• Re: ATM Equatorial platform for a lunar/planetary Newton?
  • From: "Joe Goins" <jgoins@cedex.com>
• ATM side-supports of mirrors
  • From: Johan Vanbeselaere <jvb@digilife.be>
• Re: ATM A cage as secondary holder
  • From: Johan Vanbeselaere <jvb@digilife.be>
• Re: ATM AO and Youngs Modulus for glass
  • From: Johan Vanbeselaere <jvb@digilife.be>
• Re: ATM AO and Youngs Modulus for glass
  • From: Johan Vanbeselaere <jvb@digilife.be>
• ATM subscription
  • From: John Akers <jakers@cyllene.uwa.edu.au>
• ATM Your help needed
  • From: "John Graves" <john.graves@nashville.com>
• Re: ATM Cleaning mirror before coating
  • From: John Maxwell <jmax@toad.net>
• Re: ATM Not hard
  • From: John Maxwell <jmax@toad.net>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: John Stewart <stewart@herndon.xes.xerox.com>
• RE: ATM Sawing pitch channels
  • From: "Jon B. Cooper" <jbcooper@gte.net>
• RE: ATM Saga of the moving laser dot
  • From: "Jon B. Cooper" <jbcooper@gte.net>
• ATM Grit Dispensing
  • From: "Jon B. Cooper" <jbcooper@gte.net>
• Re: ATM paint clean-up from skin
  • From: Jon Cooper <jbcooper@gte.net>
• Re: ATM Pitch test ?
  • From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
• ATM the big one
  • From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
• Re: ATM the big one SO AM I!
  • From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
• Re: ATM Which book to buy?
  • From: Jonathan Shrier <conecon@riyadh-emh1.army.mil>
• ATM: 4-Point Flotation Mirror Cell... Please explain.
  • From: Keith Wichman <kwichman@draper.com>
• ATM Re: atm-digest V1 #1221
  • From: "KELLY, A" <akelly@ghg.net>
• Re: ATM A Cage as Secondary Holder
  • From: "KELLY, A" <akelly@ghg.net>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Smaller f/ration
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Ken Hunter <kb7h@cei.net>
• ATM Full Moon Observing
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Depression in a 6" Mirror
  • From: Ken Hunter <kb7h@cei.net>
• ATM refrigerator
  • From: Ken Hunter <kb7h@cei.net>
• ATM caustic measurements
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Backlash in sprockets vs. gears
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Data Reduction for Poorman's Caustic Test.
  • From: Ken Hunter <kb7h@cei.net>
• RE: ATM parabolizing-
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• RE: ATM My turned edge (sixteen inch)
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• ATM Sawing pitch channels
  • From: Kozmic Kid <howdy@CompuServe.COM>
• ATM Bubble trouble - final follow up
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Proportion of under/over correction
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM: 4-Point Flotation Mirror Cell... Please explain.
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• RE: ATM My turned edge (sixteen inch)
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Spherical Abberation
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• ATM Summer heat - two problems
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Using sub-diam tools
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Figuring
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• ATM Sixteen inch - progress report
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• ATM Sixteen inch - 1/3.7 wave undercorrected
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• ATM Figuring/testing sixteen inch - lessons learned
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• ATM Baffling the 16" f/6 secondary cage
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Poorman's Caustic test
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Baffling the 16" f/6 secondary cage
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Poorman's Caustic test
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Sub-diameter tools?
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Visual representation of grinding/polishing wear
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM caustic measurements
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Pitch Lap woes
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• Re: ATM Data Reduction for Poorman's Caustic Test
  • From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
• ATM solar projection
  • From: Kreig McBride <kmcbride@memes.com>
• ATM occultation bar
  • From: Kreig McBride <kmcbride@memes.com>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: Kreig McBride <kmcbride@memes.com>
• ATM 23" maksutov looking for/off topic
  • From: Kreig McBride <kmcbride@memes.com>
• ATM table mountain report/another view
  • From: Kreig McBride <kmcbride@memes.com>
• ATM 0.965" eyepieces
  • From: Kreig McBride <kmcbride@memes.com>
• ATM mounting of binocular for finder scope
  • From: Kyle Barger <kbarger@navpoint.com>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Kyle Barger <kbarger@navpoint.com>
• Re: ATM Optical Coatings
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM Formica Mounting
  • From: Larry Manuel <lmanuel@sprint.ca>
• ATM paint clean-up from skin
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM paint clean-up from skin
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM Baffles for moon viewing
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM paint clean-up from skin
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM 6" f/8
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM 6" f/8
  • From: Larry Manuel <lmanuel@sprint.ca>
• ATM Neophyte Polishing
  • From: "Larry Tiffany" <ltiffany@frontiernet.net>
• ATM Pitch test ?
  • From: "Larry Tiffany" <ltiffany@frontiernet.net>
• ATM WTB 4" Mirror
  • From: "Larry Tiffany" <ltiffany@frontiernet.net>
• Re: ATM: 4-Point Flotation Mirror Cell... Please explain.
  • From: lewis@eecg.toronto.edu
• ATM Silicone oil
  • From: "Lowell Dodson" <LDDodson@worldnet.att.net>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@www.system.missouri.edu>
• Re: ATM Sawing pitch channels
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• Re: ATM Sawing pitch channels
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• RE: ATM Sawing pitch channels
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• Re: ATM Re: Button molds
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• Re: ATM Saga of the moving laser dot
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• ATM etching a perspex reticle
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• RE: An ATM Program
  • From: malsing@borg.ae.usr.com
• ATM Spherical Abberation
  • From: malsing@borg.ae.usr.com
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: malsing@borg.ae.usr.com
• Re: ATM Geographical info
  • From: malsing@borg.ae.usr.com
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "Marc Mandel" <mmandel@usd.edu>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "Marc Mandel" <mmandel@usd.edu>
• ATM Galileo Telescope Makers
  • From: "Marc Mandel" <mmandel@usd.edu>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!! (more)
  • From: "Marc Mandel" <mmandel@usd.edu>
• Re: ATM Sources for good 8" mirrors
  • From: "Marc Mandel" <mmandel@usd.edu>
• ATM Spider vanes
  • From: Marc van Leeuwen <Marc.van.leeuwen@solcon.nl>
• ATM masking primary: how much?
  • From: Marc van Leeuwen <Marc.van.leeuwen@solcon.nl>
• Re: ATM masking primary: Oops!
  • From: Marc van Leeuwen <Marc.van.leeuwen@solcon.nl>
• Re: ATM Astronomy Yellow Pages on the WWW
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• ATM A cage as secondary holder
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• Precision Dob mounts, was: Re: ATM A cage as secondary holder
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• Re: ATM A cage as secondary holder
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• Re: ATM Planetary Newtonian
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• Re: ATM oppose the russian moon. (was: boy, this would suck)
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• Re: ATM help
  • From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
• ATM Re: Spearical Abb
  • From: Mark Alsing <malsing@borg.ae.usr.com>
• ATM Paraboloids for Pyros (was Focal Length Checking)
  • From: mark cowan <cowanm@open.org>
• Re: ATM Improving mirror figure
  • From: mark cowan <cowanm@open.org>
• Re: ATM Relay lens (was: Curious about Central Obstruction Determinations)
  • From: mark cowan <cowanm@open.org>
• Re: ATM Cleaning mirror before coating
  • From: mark cowan <cowanm@open.org>
• Re: ATM Sawing pitch channels
  • From: mark cowan <cowanm@open.org>
• Re: ATM Cleaning mirror before coating
  • From: mark cowan <cowanm@open.org>
• Re: ATM Nextel Mat paint
  • From: mark cowan <cowanm@open.org>
• Re: ATM Pitch test ?
  • From: mark cowan <cowanm@open.org>
• Re: ATM Making your Lap Hard
  • From: mark cowan <cowanm@open.org>
• Re: ATM Testing for fine grinding
  • From: mark cowan <cowanm@open.org>
• Re: ATM Rough patch on edge of blank
  • From: mark cowan <cowanm@open.org>
• Re: ATM Depression in a 6" Mirror
  • From: mark cowan <cowanm@open.org>
• Re: ATM Visual representation of grinding/polishing wear
  • From: mark cowan <cowanm@open.org>
• Re: ATM Testing for fine grinding - correction
  • From: mark cowan <cowanm@open.org>
• ATM July Scientific American has article on L. Foucault
  • From: "Mark D. Holm" <mdholm@telerama.com>
• ATM Finding McMaster-Carr catalogs
  • From: "Mark D. Holm" <mdholm@telerama.com>
• Re: ATM resistance of heater
  • From: Mark Slade <mslade@erols.com>
• ATM re:OPTICAST
  • From: bj712@scn.org (Mark Zemanek)
• ATM First Big Star Party (Table Mountain)
  • From: bj712@scn.org (Mark Zemanek)
• ATM RE: really black surfaces
  • From: "Mathew Marulla" <atm@tiac.net>
• RE: ATM Determining focal length of negative lenses
  • From: "Mathew Marulla" <atm@tiac.net>
• re: ATM Equatorial platform for a lunar/planetary Newton?
  • From: Matt Devine <mdevine@nuera.com>
• re: ATM Equatorial platform for a lunar/planetary Newton?
  • From: Matt Devine <mdevine@nuera.com>
• ATM Equatorial platform for a lunar/planetary Newton?
  • From: mbc@it.aarhus.dk
• re: ATM Equatorial platform for a lunar/planetary Newton?
  • From: mbc@it.aarhus.dk
• Re: ATM Beveling out turned edge
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM simple refractor
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 1.25" vs 2" diagonal on refractor
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Out of town
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Spider vanes
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Spider vanes
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: Mel Bartels <mbartels@efn.org>
• ATM announce: CCD conference, yes we will talk about telescopes for CCDs
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Spherical Abberation
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Slightly off topic- Moon viewings
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: [ASTRO] Mason Dixon Star Party]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Cleaning mirror before coating
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM occultation bar
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: Sub diameter tools- 16" parabolizing question
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM stepper motors
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Using dental plaster
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Michael Robinson <thomrob@hot1.net>]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM A cage as secondary holder
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM A cage as secondary holder
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM A Cage as Secondary Holder
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Stiffness of Aluminum vs. Plywood
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Planetary Newtonian
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Poorman's Caustic test
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Baffling the 16" f/6 secondary cage
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM A Cage as Secondary Holder
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM the big one
  • From: Mel Bartels <mbartels@efn.org>
• ATM plane crazy
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM amount of cerium oxide
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re:Moon and Polarizing filters (shortish)
  • From: Michael Bradshaw <mbradsha@shrike.depaul.edu>
• Re: ATM eq platforms
  • From: Michael Bradshaw <mbradsha@shrike.depaul.edu>
• Re: ATM plane crazy
  • From: Michael Bradshaw <mbradsha@shrike.depaul.edu>
• Re: ATM Slightly off topic- Moon viewings
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Sawing pitch channels
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Sawing pitch channels
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM paint clean-up from skin
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Testing for fine grinding
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Depression in a 6" Mirror
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Visual representation of grinding/polishing wear
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Visual representation of grinding/polishing wear
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Re: atm-digest V1 #1241
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM wire spider info
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Mediocre Diagonals
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Disk crash - lost sites.
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• ATM Cleaning mirror before coating
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM [Fwd: [ASTRO] Mason Dixon Star Party]
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Cleaning mirror before coating
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Lost URL
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM paint clean-up from skin
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• ATM Dovetail ???
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM A question about Foucault testers
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM A question about Foucault testers
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM A cage as secondary holder
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Depression in a 6" Mirror
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM: Source of small mirrors
  • From: "Michael P. Lindner" <mikel@worldnet.att.net>
• Re: ATM Coating thin mirrors
  • From: papilio1@juno.com (Michael Pankratz)
• Re: ATM Journal and OSLO Lt.
  • From: papilio1@juno.com (Michael Pankratz)
• Re: ATM Hurst Gearhead Steppers - Uneven steps?
  • From: papilio1@juno.com (Michael Pankratz)
• Re: ATM How to find indices of refraction and dispersion for glass
  • From: spooner@page.az.net (Michael Spooner)
• ATM Sub-diameter tools?
  • From: "Michael T. DiBrino" <dibrino@eden.com>
• Re: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: Mike <mfleenor@icx.net>
• Re: ATM Boy, this would sure suck
  • From: Mike <mfleenor@icx.net>
• Re: ATM steppers
  • From: Mike <mfleenor@icx.net>
• ATM EQ Platforms, TL systems , other components
  • From: Mike <mfleenor@icx.net>
• Re: ATM A cage as secondary holder
  • From: Mike Burdo <mburdoo@azstarnet.com>
• Re: ATM: TDE Bevel-out progress
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Pitch test ?
  • From: Mike Coslo <mjc5@psu.edu>
• RE: Fw: ATM Re: Meade DS-16 mount
  • From: "Mike Marchand" <marchanm@kent.net>
• No Subject
  • From: mwechtal <mwechtal@stny.lrun.com>
• Re: ATM Lots of fireworks Alumininzing - Now a BLACK coating!
  • From: NAME <davebevel@mindspring.com>
• Re: ATM Dental Plaster
  • From: NAME <davebevel@mindspring.com>
• ATM Web page update
  • From: NAME <davebevel@mindspring.com>
• ATM Dental stone, etc. specs
  • From: NAME <davebevel@mindspring.com>
• ATM collimation page update
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM Afterthoughts of laser collimating
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM size of light cone at ocular
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Bubble trouble - final follow up
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM re:Eq. platforms
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM EQ Platform stability (was: Meade DS-16 mount)
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM EQ Platform stability (was: Meade DS-16 mount)
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Spider vanes
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Slightly off topic- Moon viewings
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Re: atm-digest V1 #1221
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: Fw: ATM Slightly off topic- Moon viewings
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Moon and Polarizing filters and picket fences
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Eq. Platforms - Dec Axis Tweaks?
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM eq platforms
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM occultation bar
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Saga of the moving laser dot
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Saga of the moving laser dot
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM A cage as secondary holder
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM 6" Dob: How Easy? How Cheap? How Heavy?
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM etching a perspex reticle
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM Backlash in sprockets vs. gears
  • From: Pat Ferrick <root@zebulon.telenet.net>
• ATM Cool (free) ephemeris program...
  • From: Pat Ferrick <root@zebulon.telenet.net>
• ATM XEphem URL
  • From: Pat Ferrick <root@zebulon.telenet.net>
• ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: Patrick & Janice Ferrick <ferrick@telenet.net>
• ATM Analysis of Nasmyth/Cass in OSLO Lt....
  • From: Patrick & Janice Ferrick <ferrick@telenet.net>
• ATM Saga of the moving laser dot
  • From: Patrick Sutton <kingskid@uslink.net>
• ATM Slow motion controls for German EQ
  • From: Patrick Sutton <kingskid@uslink.net>
• ATM Kendrick's Quik Focus
  • From: Patrick Sutton <kingskid@uslink.net>
• ATM Nextel Mat paint
  • From: Paul Thompson <paul@tommo.demon.co.uk>
• ATM Baffles for moon viewing
  • From: Paul Thompson <paul@tommo.demon.co.uk>
• ATM Coating thin mirrors
  • From: pete.koziar@baltsun.com
• ATM Judging quality of flat secondary
  • From: pete.koziar@baltsun.com
• ATM Do I really NEED to view in color?
  • From: pete.koziar@baltsun.com
• ATM Determining focal length of negative lenses
  • From: pete.koziar@baltsun.com
• ATM slow chamfering
  • From: Peter Abrahams <telscope@europa.com>
• ATM Composite replica mirrors -was ultrathin mirrors
  • From: Peter C Chen <chen@stars.gsfc.nasa.gov>
• Re: ATM blue brown haze after aluminzing.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM cad program
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Finding McMaster-Carr catalogs
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM: really black surfaces
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Astronomy Club's Choice: Big DOB or CCD?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: Fw: ATM Slightly off topic- Moon viewings
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Fw: Dovetail Aluminum Bar Stock Source???
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Equatorial Platforms
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Cleaning mirror before coating
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: Fw: ATM Cleaning mirror before coating
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Grinding Machine Strokes
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM Encoders/stepper controllers
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM Re: Button molds
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Vacuum Plasma cleaning.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM paint clean-up from skin
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM RE: FREE OPTICAL SOFTWARE AND WIN NT
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM FOUND! A powerful, FREE Optical Design Program!!!
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM re: OSLO Lt
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM blue brown haze after aluminzing.
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Journal and OSLO Lt.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM POSITIVE RELAY LENS AND OSLO LT.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM POSITIVE RELAY LENS AND OSLO LT.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• ATM test message
  • From: Petr Malon <malon@marilyn.uochb.cas.cz>
• ATM Czerny Turner monochromator
  • From: Petr Malon <malon@marilyn.uochb.cas.cz>
• ATM Optical Coatings
  • From: Phil Marcus <rocket-science@worldnet.att.net>
• Re: ATM 6" Equatorial GEQ
  • From: Phishguy33@aol.com
• ATM cad program
  • From: Puddlduk@aol.com
• ATM Rough Focal Length Testing Question
  • From: Quiz <jimquiz@earthlink.net>
• ATM Ready to Polish?
  • From: Quiz <jimquiz@earthlink.net>
• ATM Pitch poured - Now What
  • From: Quiz