Re: ATM 10" Figuring progress

[Jonathan Lavoie <jlavoie@infoteck.qc.ca>]

Richard Schwartz wrote:

>
>
> Lots of people have been where you are.   You did not say if you are
> using a subdiameter tool or a full size tool.

Full size

> You did not say anything about zones.  If your shadow has a smooth

> curve when you cut the knife edge into the beam, then you are in good
> shape.

I have no zonal problems.

> For now, assuming a full size or almost full size lap, I recommend
> short
> strokes, 1/8 W, tool on top.  Don't forget to turn the mirror
> frequently.  Generally, let the lap rest on the mirror for ten minutes
>
> before each five minute polishing spell.
>

Ok, i'll try this, thanks

> And please report your progress.   You are now in the most fun and
> magic
> part of the process.

You're right, it's very funny...