[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer

To: George Anderson <atm@atmlist.net>
Subject: Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
From: Richard <cnc@cncservo.co.uk>
Date: Fri, 13 Jul 2007 23:25:18 +0100
Delivered-to: atm_arc@astro.umsystem.edu
In-reply-to: <4697E0B7.4030808@videotron.ca>
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <Pine.LNX.4.44.0707131910390.1528-100000@uno.canit.se> <4697E0B7.4030808@videotron.ca>
Reply-to: Richard <cnc@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

Hi George,

Friday, July 13, 2007, 9:29:43 PM, you wrote:

GA> Linear polarizers have a rotatable frame. Circular polarizers don't.

That would certainly make sense.

-- 

Best regards,
  Richard in the UK

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
  - From: Jeff Rowe <jeffrowe@austin.rr.com>

References:
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
  - From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
  - From: George Anderson <tillerman1@videotron.ca>

Prev by Author: Re: [ATM] Ear of the Sow
Next by Author: Re: [ATM] carbon fiber composite fabrication
Previous by thread: Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
Next by thread: Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
Index(es):
- Author
- Thread