Re: [ATM] Polishing question

["Anthony Anconetani" <Anthony.Anconetani@genband.com>]

Hi everybody,

Thanks for your feedback on polishing. I continued on with polishing
this morning and had a great time.

-Anthony

> -----Original Message-----
> From: Jerry [mailto:wa4guu@verizon.net] 
> Sent: Thursday, July 12, 2007 5:42 PM
> To: Anthony Anconetani; atm@atmlist.net
> Subject: RE: [ATM] Polishing question
> 
> Both. The heaviness is normal for a micro-faceted lap and the 
> pitch is probably somewhat soft at 80 degreees. You can 
> probably do well polishing at 80 degrees, but if the 
> temperature doesn't go down it probably will not do so well figuring.
> 
> Jerry
> 
> -----Original Message-----
> From: Anthony Anconetani
>  
> 
> I have a question in regards to polishing on my 6F6 Mirror.
>  
> Gugolz 64. 
> ambient temperature of ~80F 
> 
> also pressed with a some tulle for micro faceting. 
>  
> I did some polish strokes and found the process to be what I 
> would describe as "heavy". 
> 
> I would say the heaviness was uniform regardless of offset or 
> rotation. 
>  
> Does this "heaviness" to the process sound correct? Or is it 
> possible the pitch is too soft?
>  
> Thanks guys,
>  
> -Anthony Anconetani
>  
> Round Rock, TX
>  
>  
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 
> 
_______________________________________________
ATM mailing list http://www.atmlist.net/