[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer

To: Harro Treur <Harro.Treur@waternet.nl>
Subject: Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
From: Dominic-Luc Webb <dlwebb@canit.se>
Date: Fri, 13 Jul 2007 16:12:27 +0200 (MET DST)
Cc: ATM Superheros <atm@atmlist.net>
Delivered-to: atm_arc@astro.umsystem.edu
In-reply-to: <46977C91.7337.00A0.0@waternet.nl>
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Interesting you mention this, Harro! I use the TFT screen I have
to test polarization filters. In my case, I need two filters
oriented 90 degrees relative each other. When orientated 90 degrees,
one is maximally transparent while the other is maximally opaque.

Dominic

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
  - From: "Harro Treur" <Harro.Treur@waternet.nl>

Prev by Author: Re: [ATM] cutting a big piece of plate glass into mirror or tool blanks
Next by Author: Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
Previous by thread: Re: [ATM] polish time for 13 inch
Next by thread: Re: [ATM] cutting a big piece of plate glass into mirror or toolblanks
Index(es):
- Author
- Thread