[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] plate glass blanks

To: dlwebb@canit.se
Subject: Re: [ATM] plate glass blanks
From: horace r davis <hrd9@juno.com>
Date: Wed, 11 Jul 2007 11:26:53 -0400
Cc: atm@atmlist.net
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

 

 if one was using plate glass 16 inch .94 thick how many point flotation
would be needed
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] plate glass blanks
  - From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] plate glass blanks
  - From: Mark Holm <mdholm@telerama.com>

Prev by Author: [ATM] plate glass blanks
Next by Author: [ATM] primary mirror cell
Previous by thread: Re: [ATM] cutting a big piece of plate glass into mirror or tool blanks
Next by thread: Re: [ATM] plate glass blanks
Index(es):
- Author
- Thread