Re: [ATM] VIVA towels protect optical surfaces?

["Bob May" <rmay@nethere.com>]

Andy, I aree with your specs.  I usually do scrrew in clamps to
hold a mirror in place  that hold the mirror in place on a board
and then put the board in a wood box.  The box is usually  two by
fours Ior deeper as neededO for the sides and three quarter thick
plywood for the top and bottom with the bottom also glued in
place.  Good long screws of plentiful quantity hold the top in
place and everything gets indexed with magic marker so that it
will go back together the same way.
Thenb this all goes into a larger cardboard box so that UPS will
have something to bust up.  Don't forget to put in a return
address sticker and the address where you are sending it on the
wood box. Don't use paper but rather use peanuts of the
industrial strength in the paper box.
Bob May
Due to the large volume of SPAM thaat I'm getting, add an open
square bracket to the subject line or my spam filter will reject
your post~
rmay at nethere.com
http: slash /nav.to slash bobmay
http: slash /bobmay dot astronomy.net
Replace the obvious words with the proper character.

_______________________________________________
ATM mailing list http://www.atmlist.net/