Amateur Telescope Makers (ATM) Archive for JUL07 - by author
- [ATM] Mirror Scratches- and no tile tool available
- From: Adam Krause <krausea34@yahoo.com>
- Re: [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian
- From: Adam Krause <krausea34@yahoo.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: Adam Krause <krausea34@yahoo.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: Adam Krause <krausea34@yahoo.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: Adam Krause <krausea34@yahoo.com>
- Re: [ATM] VIVA towels protect optical surfaces?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: [ATM] Rechanneling, Malacara
- From: Andy Saulietis <iss@pvtnetworks.net>
- [ATM] Polishing question
- From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
- Re: [ATM] Polishing question
- From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
- Re: [ATM] polish time for 13 inch
- From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
- [ATM] TOT vs MOT
- From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
- Re: [ATM] SPAM AGAIN!
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] SPAM AGAIN!
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Optical flat part II
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Nearly polished...but...
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] questions about the condition of this mirror
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Rechanneling, Malacara
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] VIVA towels protect optical surfaces?
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] All BK7
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] plate glass blanks
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or toolblanks
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Cutting Plate Glass & looking for strain..
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Sharpie test: a little help?
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] cutting glass
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] blank internal stress checking with polarizers.
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Polishing question
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] rumaging small bearings
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] polish time for 13 inch
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] suppler plate glass
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] B&W QuickCam guider.exe
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Plastic.....
- From: "Bob May" <rmay@nethere.com>
- Re: [ATM] Where to get mirror coated?
- From: Charles Broward <cbroward@ufl.edu>
- Re: [ATM] Optick IV - Sir Isaac Newton
- From: Charles Broward <cbroward@ufl.edu>
- [ATM] re spam
- From: Charles Mitchard <charlesmitchard@iinet.net.au>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: Charles Mitchard <charlesmitchard@iinet.net.au>
- Re: [ATM] SPAM AGAIN!
- From: Chris Rowland <chris_group_mail@dsl.pipex.com>
- Re: [ATM] re spam
- From: Chris Rowland <chris_group_mail@dsl.pipex.com>
- Re: [ATM] re spam
- From: Chuck Broward <cbroward@ufl.edu>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: Chuck Broward <cbroward@ufl.edu>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Corona Australis" <corona_australis@westnet.com.au>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Curt Diggs <mokiman_210@yahoo.com>
- Re: [ATM] Coolling fans for mirror
- From: Curt Diggs <mokiman_210@yahoo.com>
- Re: [ATM] TOT vs MOT
- From: Dale Eason <atmpob@yahoo.com>
- Re: [ATM] Coolling fans for mirror
- From: Dale Eason <atmpob@yahoo.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: Dan Harriman <kc5gxl@sbcglobal.net>
- [ATM] Hercules v2.0
- From: "Daniel Bakken" <deepsky4565@comcast.net>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool blanks
- From: Dave Smith <smithersscope@yahoo.com>
- Re: [ATM] SPAM AGAIN!
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: [ATM] re spam
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: [ATM] SPAM AGAIN!
- From: "David B. Toth" <ve3gyq@amsat.org>
- [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian
- From: "David Sleeter" <d.sleeter@roadrunner.com>
- [ATM] polish time for 13 inch
- From: David Steinhauer <desteinhauer@verizon.net>
- [ATM] polish time for 13 inch
- From: David Steinhauer <desteinhauer@verizon.net>
- Re: [ATM] Optical flat part II
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] plate glass blanks
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] plate glass blanks
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool blanks
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] carbon fiber composite fabrication
- From: Dominic-Luc Webb <dlwebb@canit.se>
- [ATM] rumaging small bearings
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] polish time for 13 inch
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] suppler plate glass
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] polish time for 13 inch
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Alternate Materials
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] Plastic.....
- From: Dominic-Luc Webb <dlwebb@canit.se>
- [ATM] Optick IV - Sir Isaac Newton
- From: Dominic-Luc Webb <dlwebb@canit.se>
- Re: [ATM] VIVA towels protect optical surfaces?
- From: Douglas Hudgins <hudginsclan@mac.com>
- Re: [ATM] re spam
- From: "Eric S. Johansson" <esj@harvee.org>
- [ATM] and now something complete different Re: Can the spam
- From: "Eric S. Johansson" <esj@harvee.org>
- Re: [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian
- From: "Eric S. Johansson" <esj@harvee.org>
- Re: [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian
- From: "Eric S. Johansson" <esj@harvee.org>
- Re: [ATM] Plastic Lenses (POLYCARBONITE)
- From: "Eric S. Johansson" <esj@harvee.org>
- [ATM] Optical flats
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- [ATM] Optical flat part II
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- [ATM] Optical flat part II
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- [ATM] Optical flat part II
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- [ATM] Nearly polished...but...
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- [ATM] questions about the condition of this mirror
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- Re: [ATM] questions about the condition of this mirror
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- [ATM] My spheres of infinite radius
- From: "Francis J. O'Reilly" <foreilly@verizon.net>
- Re: [ATM] Plastic.....
- From: <fundo@bellsouth.net>
- Re: [ATM] Plastic.....
- From: <fundo@bellsouth.net>
- Re: [ATM] Mirror aluminizing suggestions?
- From: George Anderson <tillerman1@videotron.ca>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: George Anderson <tillerman1@videotron.ca>
- Re: [ATM] [Fwd: Re: Betr.: Re: cutting a big piece of plate glass - Polarizer]
- From: George Anderson <tillerman1@videotron.ca>
- [ATM] B&W QuickCam guider.exe
- From: George Anderson <tillerman1@videotron.ca>
- Re: [ATM] B&W QuickCam guider.exe
- From: George Anderson <tillerman1@videotron.ca>
- [ATM] Refiguring cass mirror to newt
- From: "Gord Tulloch" <gord.tulloch@gmail.com>
- Re: [ATM] Refiguring cass mirror to newt
- From: "Gord Tulloch" <gord.tulloch@gmail.com>
- [ATM] cutting a big piece of plate glass into mirror or tool blanks
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] Cutting Plate Glass & looking for strain..
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] polish time for 13 inch
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- Re: [ATM] polish time for 13 inch
- From: Guy Brandenburg <gfbrandenburg@yahoo.com>
- [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: "Harro Treur" <Harro.Treur@waternet.nl>
- [ATM] Betr.: Hercules v2.0
- From: "Harro Treur" <Harro.Treur@waternet.nl>
- Re: [ATM] Musing upon 20" fused silica blank
- From: hermit <hermit@outofoptions.org>
- Re: [ATM] [Fwd: Re: Betr.: Re: cutting a big piece of plate glass - Polarizer]
- From: hermit <hermit@outofoptions.org>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: hermit <hermit@outofoptions.org>
- Re: [ATM] Sharpie test: a little help?
- From: hermit <hermit@outofoptions.org>
- Re: [ATM] polish time for 13 inch
- From: hermit <hermit@outofoptions.org>
- Re: [ATM] polish time for 13 inch
- From: hermit <hermit@outofoptions.org>
- [ATM] mirror problem
- From: horace r davis <hrd9@juno.com>
- [ATM] plate glass blanks
- From: horace r davis <hrd9@juno.com>
- Re: [ATM] plate glass blanks
- From: horace r davis <hrd9@juno.com>
- [ATM] primary mirror cell
- From: horace r davis <hrd9@juno.com>
- [ATM] suppler plate glass
- From: horace r davis <hrd9@juno.com>
- Re: [ATM] ATM Digest, Vol 43, Issue 30
- From: "Jack.Swaton@starryhost.com" <jack.swaton@starryhost.com>
- Re: [ATM] Mirror aluminizing suggestions?
- From: James Gort <jgort@oxford-observatory.org>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: James Lerch <jlerch1@tampabay.rr.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: James Lerch <jlerch1@tampabay.rr.com>
- Re: [ATM] Optical flat part II
- From: "James Sturtevant" <jhsturte@hotmail.com>
- Re: [ATM] Rechanneling, Malacara
- From: "James Sturtevant" <jhsturte@hotmail.com>
- Re: [ATM] Rechanneling, Malacara
- From: "James Sturtevant" <jhsturte@hotmail.com>
- Re: [ATM] Rechanneling, Malacara
- From: "James Sturtevant" <jhsturte@hotmail.com>
- Re: [ATM] Where to get mirror coated?
- From: "James Sturtevant" <jhsturte@hotmail.com>
- Re: [ATM] Optical flat part II
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: [ATM] blank internal stress checking with polarizers.
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: [ATM] polish time for 13 inch
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: [ATM] Plastic Lenses (POLYCARBONITE)
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: [ATM] questions about the condition of this mirror
- From: "jcmulherin" <jcmulherin@opticalmechanics.com>
- [ATM] FW: questions about the condition of this mirror
- From: "jcmulherin" <jcmulherin@opticalmechanics.com>
- Re: [ATM] VIVA towels protect optical surfaces?
- From: Jeff Rowe <jeffrowe@austin.rr.com>
- Re: [ATM] VIVA towels protect optical surfaces?
- From: Jeff Rowe <jeffrowe@austin.rr.com>
- [ATM] [Fwd: Re: Betr.: Re: cutting a big piece of plate glass - Polarizer]
- From: Jeff Rowe <jeffrowe@austin.rr.com>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Jeff Rowe <jeffrowe@austin.rr.com>
- Re: [ATM] Nearly polished...but...
- From: "Jerry" <wa4guu@verizon.net>
- Re: [ATM] Polishing question
- From: "Jerry" <wa4guu@verizon.net>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: "Jerry" <wa4guu@verizon.net>
- Re: [ATM] Refiguring cass mirror to newt
- From: Jim Burrows <burrjaw@earthlink.net>
- Re: [ATM] re spam
- Re: [ATM] cutting glass
- From: joe campbell <tennesseestargazer@yahoo.com>
- Re: [ATM] Coolling fans for mirror
- From: "John Sherman" <atmer@johnspics.com>
- Re: [ATM] SPAM AGAIN!
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: [ATM] Sharpie test: a little help?
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: [ATM] polish time for 13 inch
- From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
- [ATM] Mirror-grinding 10"
- From: Klaus Eriksen <ke@aigis.dk>
- Re: [ATM] Mirror-grinding 10"
- From: Klaus Eriksen <ke@aigis.dk>
- Re: [ATM] suppler plate glass
- From: "KR" <kreid@primus.ca>
- [ATM] Mirror aluminizing suggestions?
- From: "lance clarke" <alaskawolfjoe@hotmail.com>
- Re: [ATM] Plastic.....
- From: "Lawrence D. Lopez" <lopez@mv.mv.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
- Re: [ATM] carbon fiber composite fabrication
- From: "Marco" <marco.miglionico@btinternet.com>
- Re: [ATM] questions about the condition of this mirror
- From: Mark Holm <mdholm@telerama.com>
- [ATM] [Fwd: Re: VIVA towels protect optical surfaces?]
- From: Mark Holm <mdholm@telerama.com>
- Re: [ATM] plate glass blanks
- From: Mark Holm <mdholm@telerama.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: Mark Holm <mdholm@telerama.com>
- Re: [ATM] carbon fiber composite fabrication
- From: Mark Holm <mdholm@telerama.com>
- Re: [ATM] TOT vs MOT
- From: Mark Holm <mdholm@telerama.com>
- Re: [ATM] Spamm
- From: marty <martin@marty-atm.de>
- Re: [ATM] Spamm
- From: marty <martin@marty-atm.de>
- Re: [ATM] Rechanneling, Malacara
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] polish time for 13 inch
- From: "Mel Bartels" <mbartels@bbastrodesigns.com>
- Re: [ATM] re spam
- From: Michael Lindner <mikell@optonline.net>
- [ATM] Rechanneling, Malacara
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] Rechanneling, Malacara
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] VIVA towels protect optical surfaces?
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] Polishing question
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] polish time for 13 inch
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] 20" FS update and what size grinding tool
- From: Mike Lockwood <melockwo@uiuc.edu>
- [ATM] A challenging 28" project
- From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] SPAM AGAIN!
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] polish time for 13 inch
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] polish time for 13 inch
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] polish time for 13 inch
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] suppler plate glass
- From: "Mitchell R" <funnybone101@embarqmail.com>
- Re: [ATM] Focuser Collimation
- From: Nils Olof Carlin <nilsolof.carlin@telia.com>
- Re: [ATM] SPAM AGAIN!
- From: "Norm Prince" <princenorman@bellsouth.net>
- [ATM] Nearly polished...but...
- From: "Norm Prince" <princenorman@bellsouth.net>
- Re: [ATM] Nearly polished...but...
- From: "Norm Prince" <princenorman@bellsouth.net>
- Re: [ATM] polish time for 13 inch
- From: "Norm Prince" <princenorman@bellsouth.net>
- Re: [ATM] polish time for 13 inch
- From: "Norm Prince" <princenorman@bellsouth.net>
- Re: [ATM] polish time for 13 inch
- From: "Norm Prince" <princenorman@bellsouth.net>
- Re: [ATM] polish time for 13 inch
- From: "Norm Prince" <princenorman@bellsouth.net>
- [ATM] 12 inches of fun!!!
- From: "Norm Prince" <princenorman@bellsouth.net>
- [ATM] Focuser Collimation
- From: "Peter" <peter@kitgear.com>
- Re: [ATM] SPAM AGAIN!
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Optical flat part II
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Ear of the Sow
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Ear of the Sow
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] carbon fiber composite fabrication
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Alternate Materials
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Coolling fans for mirror
- From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] Un-SPAM
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Un-SPAM
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] All BK7
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] BSC1/F2
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Ear of the Sow
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Ear of the Sow
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Ear of the Sow
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Ear of the Sow
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] blank internal stress checking with polarizers.
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- [ATM] Alternate Materials
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Plastic.....
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: [ATM] Plastic Lenses (POLYCARBONITE)
- From: Richard Ozer <rozer@pacbell.net>
- Re: [ATM] TOT vs MOT
- From: "Richard Schwartz" <richard1941@gmail.com>
- Re: [ATM] 20" FS update and what size grinding tool
- From: Ric Rokosz <radicell2@yahoo.com>
- [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Robert Houdart" <robert.houdart@cruxis.be>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Robert Houdart" <robert.houdart@cruxis.be>
- Re: [ATM] Hercules v2.0
- From: "Robert Houdart" <robert.houdart@cruxis.be>
- [ATM] questions about the condition of this mirror
- From: Roman Toledo <rtoledo2002@yahoo.com>
- [ATM] questions about the condition of this mirror
- From: Roman Toledo <rtoledo2002@yahoo.com>
- [ATM] cutting a big piece of plate glass into mirror or tool
- From: Roman Toledo <rtoledo2002@yahoo.com>
- [ATM] carbon fiber composite fabrication
- From: Roman Toledo <rtoledo2002@yahoo.com>
- [ATM] questions about the condition of this mirror UPDATE
- From: Roman Toledo <rtoledo2002@yahoo.com>
- [ATM] VIVA towels protect optical surfaces?
- From: Ross Sackett <rsackett00@yahoo.com>
- [ATM] Sharpie test: a little help?
- From: Ross Sackett <rsackett00@yahoo.com>
- Re: [ATM] Sharpie test: a little help?
- From: Ross Sackett <rsackett00@yahoo.com>
- [ATM] Coolling fans for mirror
- From: "rugo@iinet.net.au" <rugo@iinet.net.au>
- Re: [ATM] Coolling fans for mirror
- From: "rugo@iinet.net.au" <rugo@iinet.net.au>
- [ATM] Can the spam
- From: "Russell Jocoy" <russjocoy@hotmail.com>
- [ATM] Cutting Plate Glass & looking for strain..
- From: "Russell Jocoy" <russjocoy@hotmail.com>
- [ATM] Plastic.....
- From: "Russell Jocoy" <russjocoy@hotmail.com>
- [ATM] Plastic Lenses (POLYCARBONITE)
- From: "Russell Jocoy" <russjocoy@hotmail.com>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool
- From: "Sachindra Karanth" <sachinkaranth@gmail.com>
- Re: [ATM] Ear of the Sow
- From: "Scott Milligan" <starzkey@charter.net>
- [ATM] It amazes me...
- From: "Shane LaPierre" <shane@ct-astronomer.com>
- [ATM] Where to get mirror coated?
- From: "Shane LaPierre" <shane@ct-astronomer.com>
- Re: [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany
- From: "Stathis Kafalis" <info@stathis-firstlight.de>
- Re: [ATM] Mirror Scratches- and no tile tool available
- From: "Stathis Kafalis" <info@stathis-firstlight.de>
- Re: [ATM] suppler plate glass
- From: "Stathis Kafalis" <info@stathis-firstlight.de>
- Re: [ATM] Focuser Collimation
- From: "Stephen Koehler" <s.c.koehler@gmail.com>
- Re: [ATM] plate glass blanks
- From: "Thomas A. Moulton" <tom@moulton.us>
- Re: [ATM] Mirror-grinding 10"
- From: "Thomas Janstrom" <thomas@moiler.com>
- Re: [ATM] Refiguring cass mirror to newt
- From: "Thomas Janstrom" <thomas@moiler.com>
- Re: [ATM] rumaging small bearings
- From: tillerman1@videotron.ca
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Tom Conlin <tomc@cs.uoregon.edu>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: Tom Conlin <tomc@cs.uoregon.edu>
- Re: [ATM] Optical flat part II
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] Optical flat part II
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] Optical flat part II
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] Nearly polished...but...
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] [Fwd: Re: VIVA towels protect optical surfaces?]
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- [ATM] blank internal stress checking with polarizers.
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] blank internal stress checking with polarizers.
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] TOT vs MOT
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] TOT vs MOT
- From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
- Re: [ATM] SPAM AGAIN!
- From: waldo kitty <wkitty42@alltel.net>
- Re: [ATM] blank internal stress checking with polarizers.
- From: waldo kitty <wkitty42@alltel.net>
- Re: [ATM] cutting a big piece of plate glass into mirror or tool blanks
- From: waldo kitty <wkitty42@alltel.net>
- Re: [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer
- From: waldo kitty <wkitty42@alltel.net>
- Re: [ATM] Polishing question
- From: waldo kitty <wkitty42@alltel.net>
- Re: [ATM] Focuser Collimation
- From: William Marriott <bmarriott@pacbell.net>
- Re: [ATM] Focuser Collimation
- From: William Marriott <bmarriott@pacbell.net>
- [ATM] Musing upon 20" fused silica blank
- From: William Marriott <bmarriott@pacbell.net>
- [ATM] carbon fiber composite fabrication
- From: William Marriott <bmarriott@pacbell.net>
- Re: [ATM] carbon fiber composite fabrication
- From: William Marriott <bmarriott@pacbell.net>
- Re: [ATM] carbon fiber composite fabrication
- From: William Marriott <bmarriott@pacbell.net>
- Re: [ATM] 20" FS update and what size grinding tool
- From: William Marriott <bmarriott@pacbell.net>
- Re: [ATM] blank internal stress checking with polarizers.
- From: Attila Schné <yolo@chello.hu>
Mail converted by MHonArc