[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Refractor baffling

> 

Hi !

Thank's a lot everyone!

Now, I can do it!

Clear skies!

Attila Schné
> feladó: "Bob May" <bobmay@nethere.com>
> dátum: 2006/07/20 Thu AM 12:57:21 CEST
> címzett: <atm@atmlist.net>
> tárgy: Re: [ATM] Refractor baffling
> 
> Simple.  Draw a line from the edge of the objective to the
> focuser on the same side on a plan of the scope.  Then follow the
> rules for plotting a Newtonian scope baffles using that line as
> the limit for incursion of the baffle to the light path.  Draw a
> line from the opposite side of the focuser (input end of the
> tube) to the objective and where the limit line and the crossing
> line cross is where the first baffle goes.  From there, the base
> of each baffle is used as the end point for the crossing line
> from the focuser to determine the next location.
> Bob May
> bobmay at nethere.com
> http: slash /nav.to slash bobmay
> http: slash /bobmay dot astronomy.net
> Replace the obvious words with the proper character.
> 
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 

_______________________________________________
ATM mailing list http://www.atmlist.net/