Amateur Telescope Makers (ATM) Archive for JUL06 - by author

• Thread Index

• Re: [ATM] Milling About
  • From: "Adam Smith" <ajus@csolve.net>
• Re: [ATM] Milling About
  • From: "Adam Smith" <ajus@csolve.net>
• Re: [ATM] New site
  • From: aki.lotjonen@phnet.fi
• [ATM] Advice for shipping a 16" mirror
  • From: "Alan K. Henderson" <alankh@ev1.net>
• [ATM] Atmer in Spain
  • From: "Alfredo Rainho Neves" <aneves@snowsoft.biz>
• [ATM] USB stepper controller
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Milling About
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Box Beam Mirror Blank
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] New site
  • From: Anthony Stillman <atmer@flash.net>
• [ATM] In a gadda da vida
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] wire spiders
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] webcam and foucault test?
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] webcam and foucault test?
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] wire spiders
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• [ATM] Auction alert!
  • From: <atm@hudler.org>
• Re: [ATM] USB stepper controller
  • From: <atm@hudler.org>
• Re: [ATM] Some fun ATM plans and more. (Plain text I hope.)
  • From: "Bill Kocken" <wmkocken@hotmail.com>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• Re: [ATM] ATM Digest, Vol 31, Issue 3
  • From: Bill Thomas <bthomas32000@yahoo.com>
• Re: [ATM] Sellers of ATM supplies
  • From: Bob Lombardi <boblombardi@cfl.rr.com>
• Re: [ATM] Milling About
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Coating not Adhering on Glass
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] (not) grinding with diamond
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] (not) grinding with diamond
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Updated my website.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Cass mirror separation
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] [atm_free] plate glass source?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] The results of the glass casting run.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] solar telescope design with heliostat
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] FW: Updated my website.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] OT: Sawtooth fire threatens RTMC camp Oakes
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Cass mirror separation
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Box Beam Mirror Blank
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Box Beam Mirror Blank
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] New site
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] New site
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Rough 360 linear resolution or 300lp/mm
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Refractor baffling
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] New site
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] How round and how square should it be (blank mirror)
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Anybody know who this is?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Anybody know who this is?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] webcam and foucault test?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] webcam and foucault test?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] webcam and foucault test?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] webcam and foucault test?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] motor drive question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] at what stage do I start foucault testing?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] split-ring disk question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Rough grinding, focault test
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Alternative Petzval Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] need confirmation on sagitta depth
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] USB stepper controller
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] USB stepper controller
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM Suppliers, etc..
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM Suppliers, etc..
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Coating choice
  • From: Charles Broward <cbroward@ufl.edu>
• Re: [ATM] USB stepper controller
  • From: Chuck Broward <cbroward@ufl.edu>
• Re: [ATM] Folding dome
  • From: "Cord Scholz" <cord@astro-image.com>
• Re: [ATM] Sellers of ATM supplies
  • From: "David Bevel" <dhcb@bellsouth.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: "David Bevel" <dhcb@bellsouth.net>
• Re: [ATM] solar telescope design with heliostat
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] The results of the glass casting run.
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Box Beam Mirror Blank
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] In a gadda da vida
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] wire spiders
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] The results of the glass casting run.
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] OT: Sawtooth fire threatens RTMC camp Oakes
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Cass mirror separation
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] OT:Maxwell's demon
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] OT:Maxwell's demon
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Milling About
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] Need source for large Timing Belt
  • From: "Don D'Egidio" <djd521@comcast.net>
• [ATM] (not) grinding with diamond
  • From: Douglas S Angle <Douglas.S.Angle@can.dupont.com>
• Re: [ATM] (not) grinding with diamond
  • From: Douglas S Angle <Douglas.S.Angle@can.dupont.com>
• Re: [ATM] New site
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] portland cement; grind. etc.
  • From: "dune" <dune@shadow.freeserve.co.uk>
• [ATM] Some fun ATM plans and more.
  • From: edwski@comcast.net
• Re: [ATM] ATM Suppliers, etc..
  • From: edwski@comcast.net
• [ATM] (not) grinding with diamond
  • From: "Eric J. Shrader" <eric.shrader@comcast.net>
• [ATM] Mirror-O-Matic
  • From: "Eric J. Shrader" <eric.shrader@comcast.net>
• [ATM] motor drive question
  • From: "eric torraca" <eric.torraca@gmail.com>
• Re: [ATM] motor drive question
  • From: "eric torraca" <eric.torraca@gmail.com>
• Re: [ATM] motor drive question
  • From: "eric torraca" <eric.torraca@gmail.com>
• Re: [ATM] Equatorial platforms, 1 rpm motors, and First light
  • From: fabio@voreas.com
• Re: [ATM] solar telescope design with heliostat
  • From: Fabio Pettinati <fabio@voreas.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] ATM Suppliers, etc..
  • From: GF <gary@rcn.com>
• [ATM] Ultrathin, round two
  • From: Goo <vorblesnak@peak.org>
• [ATM] [OT] Simeon: Test Email
  • From: "Graham McGuire" <mcgugrah@hotmail.com>
• [ATM] Newbie needs help getting to sphere...
  • From: "Graham McGuire" <mcgugrah@hotmail.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: Grumpa1 <jjdubois@insightbb.com>
• Re: [ATM] ATM observatory dome ... sorta
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] solar telescope design with heliostat
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] New site
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Sellers of ATM supplies
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] at what stage do I start foucault testing?
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] at what stage do I start foucault testing?
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] need confirmation on sagitta depth
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] In a gadda da vida
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Sellers of ATM supplies
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Newbie needs help getting to sphere...
  • From: hermit <hermit@outofoptions.org>
• [ATM] plans to build portable telescope dome
  • From: horace r davis <hrd9@juno.com>
• Re: [ATM] Box Beam Mirror Blank
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] New site
  • From: Aki Lötjönen <aki.lotjonen@phnet.fi>
• Re: [ATM] New site
  • From: Aki Lötjönen <aki.lotjonen@phnet.fi>
• [ATM] Re Milling About
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] (not) grinding with diamond
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] (not) grinding with diamond
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] (not) grinding with diamond
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] webcam and foucault test?
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] plans to build portable telescope dome
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] plans to build portable telescope dome
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] The results of the glass casting run.
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] webcam and foucault test?
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Cass Cal has error-(was Cass sep)
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] motor drive question
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] motor drive question
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Equatorial platforms, 1 rpm motors, and First light
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] EQ Platform drive
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] webcam and foucault test?
  • From: Jeff Rowe <jroweapp@swbell.net>
• Re: [ATM] webcam and foucault test?
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Burgundy Pitch
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Folding dome
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] ATM observatory dome ... sorta
  • From: "John Sherman" <atm@johnspics.com>
• [ATM] Cass mirror separation
  • From: "John Sherman" <atm@johnspics.com>
• [ATM] Star Test program
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] coating choice?
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Rough grinding, focault test
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Mirror-O-Matic
  • From: "libor nemec" <liborec.n@seznam.cz>
• [ATM] split-ring disk question
  • From: Luiz Henrique Duczmal <duczmal@est.ufmg.br>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] solar telescope design with heliostat
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Rough grinding, focault test
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] wire spiders
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Small Dob Question: Alignment features needed for accurate encoder GOTO's?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Small Dob Question: Alignment features needed for accurate encoder GOTO's?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Tom's back - Parabolizing Plate Glass 12.5" x 0.73" f/5.5
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Tom's back - Parabolizing Plate Glass 12.5" x 0.73" f/5.5
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Equatorial platforms, 1 rpm motors, and First light
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] need confirmation on sagitta depth
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] EQ Platform drive
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] (not) grinding with diamond
  • From: "Michael Koch" <astroelectronic@t-online.de>
• Re: [ATM] Folding dome
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] Secondary cowl
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] webcam and foucault test?
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] plans to build portable telescope dome
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] A Kiln in a Bell Jar
  • From: Michael Wheatley <atmwheatley@telus.net>
• [ATM] Box Beam Mirror Blank
  • From: Michael Wheatley <atmwheatley@telus.net>
• [ATM] Rough 360 linear resolution or 300lp/mm
  • From: "Miguel" <emiliarodriguez@bellsouth.net>
• [ATM] Rough grinding, focault test
  • From: "Miguel" <emiliarodriguez@bellsouth.net>
• [ATM] Some images from the 32" F/4
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Secondary cowl
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Cass mirror separation
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Tom's back - Parabolizing Plate Glass 12.5" x 0.73" f/5.5
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] webcam and foucault test?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] webcam and foucault test?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Burgundy Pitch
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] In a gadda da vida
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Auction alert!
  • From: Mike Rock <mikerock@mhtc.net>
• Re: [ATM] OT:Maxwell's demon
  • From: Mike Rock <mikerock@mhtc.net>
• Re: [ATM] at what stage do I start foucault testing?
  • From: Mike Rock <mikerock@mhtc.net>
• [ATM] [Fwd: NDN: Re: at what stage do I start foucault testing?]
  • From: Mike Rock <mikerock@mhtc.net>
• [ATM] Pre-First Light!!!!!!!!!!
  • From: "Mitchell" <Funnybone101@comcast.net>
• [ATM] Folding dome
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] Folding dome
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] Folding dome
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] Folding dome
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] Folding dome
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] Refractor baffling
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] webcam and foucault test?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Coating choice
  • From: ntent <ntent@pctcnet.net>
• Re: [ATM] webcam and foucault test?
  • From: "pbunn@matrixei.com" <pbunn@patbunn.com>
• Re: [ATM] Coating not Adhering on Glass
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Coating not Adhering on Glass
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] webcam and foucault test?
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] webcam and Foucault test?
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] webcam and Foucault test?
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] motor drive question
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] motor drive question
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Milling About
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Cass Cal has error-(was Cass sep)
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] CassGen
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Equatorial platforms, 1 rpm motors, and First light
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] In a gadda da vida
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] Minimum Focus Shift with f-number
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Alternative Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Alternative Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Complexity
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Alternative Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Tom's back - Parabolizing Plate Glass 12.5" x 0.73" f/5.5
  • From: "Richard Ozer" <rozer@pacbell.net>
• [ATM] Burgundy Pitch
  • From: Rick M <optical_stargazer@yahoo.com>
• [ATM] Burgundy Pitch
  • From: Rick M <optical_stargazer@yahoo.com>
• Re: [ATM] A Kiln in a Bell Jar
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Cass mirror separation
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Cass mirror separation
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Cass Cal has error-(was Cass sep)
  • From: Ric Rokosz <radicell2@yahoo.com>
• [ATM] webcam and foucault test?
  • From: "Robert OToole" <polaris@gsinet.net>
• [ATM] coating choice?
  • From: "Robert OToole" <polaris@gsinet.net>
• Re: [ATM] Cass mirror separation
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• Re: [ATM] Cass mirror separation
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• [ATM] Need source for large Timing Belt
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• [ATM] Updated my website.
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] Updated my website.
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] Updated my website.
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] ATM observatory dome ... sorta
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] New site
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] How round and how square should it be (blank mirror)
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] How round and how square should it be (blank
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] How round and how square should it be (blank)
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] Anybody know who this is?
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] at what stage do I start foucault testing?
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] at what stage do I start foucault testing?
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] need confirmation on sagitta depth
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] need confirmation on sagitta depth
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] I have a 4" circle with no contact?
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] ATM Suppliers, etc..
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] ATM Suppliers, etc..
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] Sellers of ATM supplies
  • From: "Ronald Standage" <ron.standage@asml.com>
• [ATM] plans to build an adjustable observing chair - cheap!
  • From: RP Sutton <rp@suttonsonline.us>
• Re: [ATM] ATM Digest, Vol 31, Issue 14--- Box beam mirror blank
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Equatorial platforms, 1 rpm motors, and First light
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] EQ Platform drive
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Small Dob Question: Alignment features needed for accurate encoder GOTO's?
  • From: Scott Carson <scottcarson@austin.rr.com>
• Re: [ATM] Small Dob Question: Alignment features needed for accurate encoder GOTO's?
  • From: Scott Carson <scottcarson@austin.rr.com>
• Re: [ATM] plans to build an adjustable observing chair - cheap!
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] (not) grinding with diamond
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] Stellafane 2006 report & images
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• [ATM] aqua success
  • From: shyam rathod <iloveyawli@yahoo.com>
• [ATM] water interference
  • From: shyam rathod <iloveyawli@yahoo.com>
• [ATM] water test
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] water test
  • From: shyam rathod <iloveyawli@yahoo.com>
• [ATM] [OT] errors sent to posting members from an invalid address
  • From: simeon ivanov <simo@simoivanov.com>
• Re: [ATM] Mirror-O-Matic
  • From: Sonya Gaskell <sonya@ggms.com>
• Re: [ATM] EQ Platform drive
  • From: Steve Messner <smessner@rconnect.com>
• [ATM] ATM observatory dome ... sorta
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] Updated my website.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] FW: Updated my website.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Updated my website.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] The results of the glass casting run.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] The results of the glass casting run.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] How round and how square should it be (blank mirror)
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Need source for large Timing Belt
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] at what stage do I start foucault testing?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] need confirmation on sagitta depth
  • From: "Treur, Harro" <harro.treur@waternet.nl>
• [ATM] silveringkit
  • From: "Treur, Harro" <harro.treur@waternet.nl>
• Re: [ATM] ATM Suppliers, etc..
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] New site
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] New site
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] New site
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] New site
  • From: "vladimir sacek" <vla@toast.net>
• [ATM] The Waindle pie plate grinder, looking for ideas
  • From: vorblesnak@peak.org
• [ATM] Small Dob Question: Alignment features needed for accurate encoder GOTO's?
  • From: vorblesnak@peak.org
• [ATM] The Waindle pie plate grinder, looking for ideas
  • From: vorblesnak@peak.org
• [ATM] Refractor baffling
  • From: Attila Schné <yolo@chello.hu>
• Re: [ATM] Refractor baffling
  • From: <yolo@chello.hu>