Amateur Telescope Makers (ATM) Archive for JUL05 - by thread

• Author Index

• Re: [ATM] Is There a Difference, James Lerch
  • Re: [ATM] Is There a Difference, Richard F.L.R. Snashall
    • Re: [ATM] Is There a Difference, Richard F.L.R. Snashall
  • RE: [ATM] Is There a Difference, Jerry
    • Re: [ATM] Is There a Difference, James Lerch
      • Re[2]: [ATM] Is There a Difference, Richard
      • Re: [ATM] Is There a Difference, Richard F.L.R. Snashall
      • RE: [ATM] Is There a Difference, Jerry
      • Re: Re[2]: [ATM] Is There a Difference, James Lerch
• [ATM] (no subject), Jerry
• [ATM] 12.5 inches BVC advice for parabolizing, RM L
  • Re: [ATM] 12.5 inches BVC advice for parabolizing, hermit
  • Re: [ATM] 12.5 inches BVC advice for parabolizing, Dale Eason
  • Re: [ATM] 12.5 inches BVC advice for parabolizing, Virgil.Johnson
  • <Possible follow-up(s)>
  • Re: [ATM] 12.5 inches BVC advice for parabolizing, RM L
    • Re: [ATM] 12.5 inches BVC advice for parabolizing, Bill Kelley
      • Re: [ATM] 12.5 inches BVC advice for parabolizing, Dale Eason
      • Re[2]: [ATM] 12.5 inches BVC advice for parabolizing, Richard
      • Re: [ATM] 12.5 inches BVC advice for parabolizing, Mel Bartels
      • Re: [ATM] 12.5 inches BVC advice for parabolizing, Dale Eason
      • Re: [ATM] 12.5 inches BVC advice for parabolizing, Mel Bartels
      • [ATM] Patterns of Testing: how we are messing up the hobby, Mel Bartels
      • Re: [ATM] Patterns of Testing: how we are messing up the hobby, Kevin Whitefire
      • Re: [ATM] Patterns of Testing: how we are messing up the hobby, Daniel Fundo
      • Re: [ATM] Patterns of Testing: how we are messing up the hobby, George Anderson
      • Re: [ATM] Patterns of Testing: how we are messing up the hobby, Bob May
      • Re: [ATM] 12.5 inches BVC advice for parabolizing, Ken Hunter
      • Re: [ATM] 12.5 inches BVC advice for parabolizing, Bob May
• [ATM] 12.5 inches BVC mirror - more details, RM L
  • RE: [ATM] 12.5 inches BVC mirror - more details, Jerry
  • <Possible follow-up(s)>
  • Re: [ATM] 12.5 inches BVC mirror - more details, George Anderson
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring, Hugues.Laroche
• [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, RM L
  • Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, Guy Brandenburg
  • RE: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, Jerry
  • Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, Mel Bartels
  • Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, George Anderson
  • Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, Bob May
    • Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties, Jerry Dove
• [ATM] 12.5 inches BVC mirror update - new photos, RM L
• [ATM] 12.5 inches BVC parabolizing : looks good, RM L
  • Re: [ATM] 12.5 inches BVC parabolizing : looks good, Bob May
• [ATM] A Tip for Beginners., John Moore
  • Re: [ATM] A Tip for Beginners., John Moore
    • Re: [ATM] A Tip for Beginners., John Moore
    • Re: [ATM] A Tip for Beginners., Tom Moulton
• [ATM] Anote on replying to digest messages, et. al., Michael Lindner
  • Re: [ATM] Anote on replying to digest messages, et. al., John Moore
• [ATM] Apooligies, David Harbour
• [ATM] Arcticle trade., John Moore
  • Re: [ATM] Arcticle trade., Brian William Bainbridge
    • Re: [ATM] Arcticle trade., John Moore
• [ATM] Artificial-star w/fiber-optics, John Moore
  • Re: [ATM] Artificial-star w/fiber-optics, aplanatic
• [ATM] ATM from Paqkistan, Mahmood Hassan
  • Re: [ATM] ATM from Paqkistan, Bob May
  • <Possible follow-up(s)>
  • Fwd: Re: [ATM] ATM from Paqkistan, Matthew L. Brown
    • Re: Fwd: Re: [ATM] ATM from Paqkistan, Ken Hunter
      • Re: Fwd: Re: [ATM] ATM from Paqkistan, Dave Smith
      • Re: Fwd: Re: [ATM] ATM from Paqkistan, Scott Ewart
    • Re: [ATM] ATM from Paqkistan, Jim Burrows
      • Re: [ATM] ATM from Paqkistan, hermit
      • Re: [ATM] ATM from Paqkistan, Bob May
• [ATM] ATM: Razor Blades (primer), David Harbour
  • <Possible follow-up(s)>
  • Re: [ATM] ATM: Razor Blades (primer), richas
    • Re: [ATM] ATM: Razor Blades (primer), David Harbour
• [ATM] Best of ATMJ?, Rob
  • Re: [ATM] Best of ATMJ?, John Moore
  • Re: [ATM] Best of ATMJ?, Woodchuck
• [ATM] binoviewer question, Dave Smith
  • <Possible follow-up(s)>
  • Re: [ATM] binoviewer question, john sherman
  • Re: [ATM] binoviewer question, Jarvis Krumbein
• [ATM] BVC Blanks, Jason Hissong
  • Re: [ATM] BVC Blanks, Jonathan Lavoie
    • Re: [ATM] BVC Blanks, Jason Hissong
• [ATM] Can a Trilateral Dob be computer Operated?, Dowd(s)
  • Re: [ATM] Can a Trilateral Dob be computer Operated? (longish reply), Dave Smith
    • Re: [ATM] Can a Trilateral Dob be computer Operated? (longish reply), Mel Bartels
      • Re: [ATM] Can a Trilateral Dob be computer Operated? (longish reply), Dave Smith
  • <Possible follow-up(s)>
  • Re: [ATM] Can a Trilateral Dob be computer Operated?, Hugues.Laroche
• [ATM] Care Package Signup, Ken Hunter
  • Re: [ATM] Care Package Signup, Pat Bunn
    • Re: [ATM] Care Package Signup, Pat Bunn
  • RE: [ATM] Care Package Signup, Robert Haler
  • Re: [ATM] Care Package Signup, Ken Hunter
  • Re: [ATM] Care Package Signup, Stan Truitt
  • Re: [ATM] Care Package Signup (UPDATE), Ken Hunter
  • <Possible follow-up(s)>
  • re: [ATM] Care Package Signup, GF
  • Re: [ATM] Care Package Signup, Jarvis Krumbein
  • Re: [ATM] Care Package Signup, vorblesnak
    • Re: [ATM] Care Package Signup, Ken Hunter
• [ATM] Cassegrain baffle design, Benoit Schillings
  • Message not available
    • Re: [ATM] Cassegrain baffle design, Michael Peck
• [ATM] Collimating from the eyepiece., Clive Rogers
  • Re: [ATM] Collimating from the eyepiece., Mike Lockwood
  • Re: [ATM] Collimating from the eyepiece., Scott Ewart
  • <Possible follow-up(s)>
  • Re: [ATM] Collimating from the eyepiece., Clive Rogers
• Re: [ATM] Collimating, the eccentric way, Rob&DonnaF
  • Re: [ATM] Collimating, the eccentric way, Nils Olof Carlin
• [ATM] conical 11" mirror, Rob
• [ATM] cylindrical mirror grinding, Jess Tauber
  • Re: [ATM] cylindrical mirror grinding, Bob May
• Re: [ATM] Design Tool (longish), Richard F.L.R. Snashall
• [ATM] difference 1/8 1/16 1/20 wave?, Jerry
  • Re: [ATM] difference 1/8 1/16 1/20 wave?, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] difference 1/8 1/16 1/20 wave?, matt
    • Re: [ATM] difference 1/8 1/16 1/20 wave?, Bob May
  • Re: [ATM] difference 1/8 1/16 1/20 wave?, mdholm
    • Re: [ATM] difference 1/8 1/16 1/20 wave?, Michael Peck
      • Re: [ATM] difference 1/8 1/16 1/20 wave?, Bob May
  • Re: [ATM] difference 1/8 1/16 1/20 wave?, john sherman
    • Re: [ATM] difference 1/8 1/16 1/20 wave?, John Moore
      • RE: [ATM] difference 1/8 1/16 1/20 wave?, Jerry
      • RE: [ATM] difference 1/8 1/16 1/20 wave?, John Moore
• [ATM] dob balance, lance clarke
  • Re: [ATM] dob balance, Scott Ewart
  • Re: [ATM] dob balance, Bob May
  • RE: [ATM] dob balance, Alan Scott
• [ATM] dob motor., John Moore
  • Re: [ATM] dob motor., Bob May
    • Re: [ATM] dob motor., John Moore
      • Re: [ATM] dob motor., Bill Marriott
      • Re: [ATM] dob motor., Ken Hunter
• [ATM] Experiments in Cassegrain mirror spacing, Mike Lockwood
  • Re: [ATM] Experiments in Cassegrain mirror spacing, Kevin Whitefire
• [ATM] figuring 10 inch mirror, Wayne Hilliard
  • Re: [ATM] figuring 10 inch mirror, Mark Holm
  • Re: [ATM] figuring 10 inch mirror, Mark Holm
    • Re: [ATM] figuring 10 inch mirror, Wayne Hilliard
      • Re: [ATM] figuring 10 inch mirror, Mark Holm
      • Re: [ATM] figuring 10 inch mirror, Wayne Hilliard
      • Re: [ATM] figuring 10 inch mirror, Mark Holm
      • Re: [ATM] figuring 10 inch mirror, Mark Holm
      • Re: [ATM] figuring 10 inch mirror, hermit
      • RE: [ATM] figuring 10 inch mirror, Jerry
      • Re: [ATM] figuring 10 inch mirror, Bob May
      • RE: [ATM] figuring 10 inch mirror, Jerry
      • Re: [ATM] figuring 10 inch mirror, Mark Holm
      • RE: [ATM] figuring 10 inch mirror, Jerry
      • Re: [ATM] figuring 10 inch mirror, Ken Hunter
      • Re: [ATM] figuring 10 inch mirror, Ken Hunter
      • Re: [ATM] figuring 10 inch mirror, Bob May
  • Re: [ATM] figuring 10 inch mirror, Jim Burrows
  • <Possible follow-up(s)>
  • Re: [ATM] figuring 10 inch mirror, Wayne Hilliard
    • Re: [ATM] figuring 10 inch mirror, Scott Ewart
  • Re: [ATM] figuring 10 inch mirror, Wayne Hilliard
    • Re: [ATM] figuring 10 inch mirror, Scott Ewart
• [ATM] Figuring Long Radius Mirrors, Greg Jones
• [ATM] First mail to atm list, Mahmood Hassan
  • Re: [ATM] First mail to atm list, Dave Smith
  • Re: [ATM] First mail to atm list, John Lynch
  • Re: [ATM] First mail to atm list, Ken Hunter
    • Re: [ATM] First mail to atm list, Bill Marriott
      • Re: [ATM] First mail to atm list, Ken Hunter
  • Re: [ATM] First mail to atm list, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] First mail to atm list, GARY FUCHS
  • Re: [ATM] First mail to atm list, Tom and Beth
• Re: [ATM] First mail to atm list: "inbetween"grits, GARY FUCHS
  • Re: [ATM] First mail to atm list: "inbetween"grits, Bob May
    • Re: [ATM] First mail to atm list: "inbetween"grits, GF
• Re: [ATM] Focusing Help, Bob May
• [ATM] From mirror support to the frame, Alan K. Henderson
  • Re: [ATM] From mirror support to the frame, Mark Holm
  • <Possible follow-up(s)>
  • Re: [ATM] From mirror support to the frame, matt
    • Re: [ATM] From mirror support to the frame, Alan K. Henderson
      • Re: [ATM] From mirror support to the frame, Nils Olof Carlin
      • Re: [ATM] From mirror support to the frame, Jan van Gastel
• [ATM] FW: [AR] OT: 10th Planet Discovered, Thomas Janstrom
• [ATM] Fw: [esa_general] The unfolding space telescope, Jean-Guy Moreau
• Re: [ATM] Gimbaled Secondary mirror, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] Gimbaled Secondary mirror, matt
  • Re: [ATM] Gimbaled Secondary mirror, Don Clement
    • Re: [ATM] Gimbaled Secondary mirror, Don Clement
• [ATM] Gimbaled Secondary mirror (report), atm
  • <Possible follow-up(s)>
  • Re: [ATM] Gimbaled Secondary mirror (report), Richard
    • Re: [ATM] Gimbaled Secondary mirror (report), Bob May
  • Re: [ATM] Gimbaled Secondary mirror (report), atm
  • Re: [ATM] Gimbaled Secondary mirror (report), Bob May
• [ATM] Glass Types, Tom Moulton
  • Re: [ATM] Glass Types, Mark Holm
    • Re[2]: [ATM] Glass Types, Richard
  • Re: [ATM] Glass Types, Bob May
    • RE: [ATM] Glass Types, Thomas Janstrom
• Re: [ATM] Help with star test interpretation - TUE,SA or something else?, john sherman
  • Re: [ATM] Help with star test interpretation - TUE,SA or something else?, David Harbour
  • <Possible follow-up(s)>
  • RE: [ATM] Help with star test interpretation - TUE,SA or something else?, Koehler, Steve
• [ATM] Higher readings on one axis (2)..., Jean-yves Lauture
  • Re: [ATM] Higher readings on one axis (2)..., Mike Lockwood
  • Re: [ATM] Higher readings on one axis (2)..., Jim Burrows
  • Re: [ATM] Higher readings on one axis (2)..., John Moore
  • Re: [ATM] Higher readings on one axis (2)..., John Moore
• [ATM] Higher readings on one axis..., Jean-yves Lauture
  • Re: [ATM] Higher readings on one axis..., John Moore
    • Re: [ATM] Higher readings on one axis..., Jean-yves Lauture
      • Re: [ATM] Higher readings on one axis..., Mike Lockwood
      • Re: [ATM] Higher readings on one axis..., Jim Burrows
  • Re: [ATM] Higher readings on one axis..., Scott Ewart
• [ATM] In-Search-off the "Star Test", John Moore
  • Re: [ATM] In-Search-off the "Star Test", Bob May
• [ATM] Industrial-strength mirror sling, Alan K. Henderson
  • Re: [ATM] Industrial-strength mirror sling, Andy Saulietis
    • Re: [ATM] Industrial-strength mirror sling, mdholm
      • Re: [ATM] Industrial-strength mirror sling, Andy Saulietis
      • RE: [ATM] Industrial-strength mirror sling, Peter
      • Re: [ATM] Industrial-strength mirror sling, Jan van gastel
      • Re[2]: [ATM] Industrial-strength mirror sling, Richard
  • Re: [ATM] Industrial-strength mirror sling, Richard
    • Re: [ATM] Industrial-strength mirror sling, Nils Olof Carlin
  • <Possible follow-up(s)>
  • Re: [ATM] Industrial-strength mirror sling, matt
  • Re: [ATM] Industrial-strength mirror sling, Alan K. Henderson
    • Re: [ATM] Industrial-strength mirror sling, Nils Olof Carlin
      • Re: [ATM] Industrial-strength mirror sling, Vladimir Galogaza
  • Re: [ATM] Industrial-strength mirror sling, matt
• [ATM] Inner Curves of a Doublet or Triplet, Richard F.L.R. Snashall
• [ATM] John Dobson and a "glint of sunlight off of a raven's eye...", Jerry
• [ATM] lap plowing, Chuck Meaney
  • Re: [ATM] lap plowing, John Moore
  • Re: [ATM] lap plowing, hermit
• [ATM] lurie-houghton progress, Guy Brandenburg
  • <Possible follow-up(s)>
  • [ATM] lurie-houghton progress, Guy Brandenburg
    • Re: [ATM] lurie-houghton progress, Richard F.L.R. Snashall
    • Re: [ATM] lurie-houghton progress, Kevin Whitefire
      • Re[2]: [ATM] lurie-houghton progress, Richard
    • Re: [ATM] lurie-houghton progress, Bob May
      • Re: [ATM] lurie-houghton progress, Guy Brandenburg
• [ATM] Mels Drives, Bill Hollenbach
• Re: [ATM] Milligan interferometry report, Michael Peck
  • Re: [ATM] Milligan interferometry report, Ken Lowther
    • Re: [ATM] Milligan interferometry report, Michael Peck
      • Re: [ATM] Milligan interferometry report, David Harbour
  • <Possible follow-up(s)>
  • Re: [ATM] Milligan interferometry report, Mike Lockwood
    • Re: [ATM] Milligan interferometry report, Jim Burrows
      • [ATM] Test stand astig., edge support, Mike Lockwood
      • Re: [ATM] Test stand astig., edge support, Nils Olof Carlin
      • Re: [ATM] Test stand astig., edge support, Michael Peck
      • Re: [ATM] Test stand astig., edge support, Dale Eason
      • Re: [ATM] Test stand astig., edge support, Dale Eason
      • Re: [ATM] Test stand astig., edge support, Michael Peck
  • RE: [ATM] Milligan interferometry report, Koehler, Steve
    • Re: [ATM] Milligan interferometry report, Nils Olof Carlin
• [ATM] Mirror F/L, c f
  • Re: [ATM] Mirror F/L, Jonathan Lavoie
• Re: [ATM] mirror grinding, David Harbour
  • Re: [ATM] mirror grinding, Bob May
    • Re: [ATM] mirror grinding, Mel Bartels
      • Re: [ATM] mirror grinding, Bob May
    • Re: [ATM] mirror grinding, Andy Saulietis
      • Re: [ATM] mirror grinding, Guy Brandenburg
    • Re: [ATM] mirror grinding, Jeff Baldwin
• [ATM] mirror testers, john sherman
  • Re: [ATM] mirror testers, Michael Peck
• [ATM] mirror-makers in India, Guy Brandenburg
• [ATM] more on cassegrain baffling..., Benoit Schillings
  • Re: [ATM] more on cassegrain baffling..., Mike Lockwood
  • Message not available
    • Re: [ATM] more on cassegrain baffling..., Andy Saulietis
  • Message not available
    • Re: [ATM] more on cassegrain baffling..., Michael Peck
      • Re: [ATM] more on cassegrain baffling..., Kevin Whitefire
  • Re: [ATM] more on cassegrain baffling..., Bob May
• [ATM] More on shop practices, John Lynch
• [ATM] new pits keep appearing, Paul Grapendaal
  • Re: [ATM] new pits keep appearing, Ken Hunter
  • Re: [ATM] new pits keep appearing, Bob May
    • [ATM] Here's a new one, Ken Reid
      • Re: [ATM] Here's a new one, Ken Hunter
      • Re: [ATM] Here's a new one, Ken Reid
      • Re: [ATM] Here's a new one, Bob May
      • RE: [ATM] Here's a new one, Peter
      • RE: [ATM] Here's a new one, Ken Hunter
      • RE: [ATM] Here's a new one, Peter
      • Re: [ATM] Here's a new one, Pete
      • Re: [ATM] Here's a new one, Ken Hunter
• [ATM] Of Men and Honor, ntent
  • Re: [ATM] Of Men and Honor, Darius Blaszijk
  • Re: [ATM] Of Men and Honor, Daniel Fundo
  • <Possible follow-up(s)>
  • Fw: [ATM] Of Men and Honor, Darius Blaszijk
• [ATM] Optics design and vignetting, Donald Good
  • <Possible follow-up(s)>
  • Re: [ATM] Optics design and vignetting, Michael Peck
    • RE: [ATM] Optics design and vignetting, Donald Good
  • Re: [ATM] Optics design and vignetting, Bob May
• [ATM] OT:The four observers (humour), George Anderson
• [ATM] over&under correction., John Moore
  • Re: [ATM] over&under correction., Richard
    • Re: [ATM] over&under correction., John Moore
      • Re: [ATM] over&under correction., Mel Bartels
  • Re: [ATM] over&under correction., Jim Burrows
    • Re: [ATM] over&under correction., John Moore
    • Re: [ATM] over&under correction., Michael Peck
      • Re: [ATM] over&under correction., Mike Lockwood
      • Re: [ATM] over&under correction., John Moore
      • RE: [ATM] over&under correction., Scott Milligan
      • Re[2]: [ATM] over&under correction., Richard
      • Was: RE: Re[2]: [ATM] over&under correction. IS: ATMLIST responseprotocol, Scott Milligan
      • Re: RE: Re[2]: [ATM] over&under correction. IS: ATMLISTresponseprotocol, Bob May
      • Re[5]: [ATM] over&under correction. IS: ATMLIST responseprotocol, Richard
      • Re: [ATM] over&under correction. IS: ATMLIST responseprotocol, Mark Holm
      • Re: [ATM] over&under correction. IS: ATMLIST responseprotocol, Daniel Fundo
      • Re: [ATM] over&under correction. IS: ATMLIST responseprotocol, Bob May
      • Re: [ATM] over&under correction., Bob
      • Re: [ATM] over&under correction., Clive Rogers
      • Re[2]: [ATM] over&under correction., Richard
      • RE: Re[2]: [ATM] over&under correction., Jerry
      • Re[4]: [ATM] over&under correction., Richard
      • RE: Re[2]: [ATM] over&under correction., Jerry
      • Fine points o'grammer 'n' spellin (was: RE: Re[2]: [ATM] over&undercorrection.), Guy Brandenburg
      • Re: Fine points o'grammer 'n' spellin (was: RE: Re[2]: [ATM]over&undercorrection.), George Anderson
      • RE: Fine points o'grammer 'n' spellin (was: RE: Re[2]:[ATM]over&undercorrection.), Jerry
      • Re: Re[2]: [ATM] over&under correction., Bob May
      • Foo: Re: Re[2]: [ATM] over&under correction., Woodchuck
      • Re: [ATM] over&under correction., Mike Spooner
      • RE: [ATM] over&under correction., Michael Peck
  • <Possible follow-up(s)>
  • Fw: [ATM] over&under correction., Bill Kelley
• [ATM] Package to Mahmood..., Ken Hunter
  • Re: [ATM] Package to Mahmood..., Malcolm Macdonald
    • Re: [ATM] Package to Mahmood..., Vladimir Galogaza
• [ATM] Pitch lap, Cec & Cris
  • RE: [ATM] Pitch lap, Jerry
  • Re: [ATM] Pitch lap, Guy Brandenburg
  • Re: [ATM] Pitch lap, Bob May
• [ATM] pitch&strehl., John Moore
  • Re: [ATM] pitch&strehl., Mel Bartels
    • Re: [ATM] pitch&strehl., John Moore
  • Re: [ATM] pitch&strehl., Mike Lockwood
    • Re: [ATM] pitch&strehl., John Moore
  • Re: [ATM] pitch&strehl., Mark Holm
    • Re: [ATM] pitch&strehl., John Moore
      • Re: [ATM] pitch&strehl., Mark Holm
      • Re: [ATM] pitch&strehl., Nils Olof Carlin
      • Re: [ATM] pitch&strehl., John Moore
      • Re: [ATM] pitch&strehl., Jeff Baldwin
      • Re: [ATM] pitch&strehl., Jim Burrows
• [ATM] Pits,,, A Tip!, John Moore
  • Re: [ATM] Pits,,, A Tip!, Scott Ewart
• [ATM] Plate FEA Resource, Richard F.L.R. Snashall
• [ATM] points to ponder., John Moore
  • Re: [ATM] points to ponder., Thomas A. Moulton
    • Re: [ATM] points to ponder., Gary Woods
      • Re: [ATM] points to ponder., John Moore
      • Re: [ATM] points to ponder., Mike Lockwood
      • Re: [ATM] points to ponder., John Moore
• [ATM] Question about "Null-testing", John Moore
  • Re: [ATM] Question about "Null-testing", hermit
    • Re: [ATM] Question about "Null-testing", John Moore
  • Re: [ATM] Question about "Null-testing", Bob May
    • Re[2]: [ATM] Question about "Null-testing", Richard
      • Re[2]: [ATM] Question about "Null-testing", Andy Saulietis
      • Re: Re[2]: [ATM] Question about "Null-testing", David Harbour
      • Re[4]: [ATM] Question about "Null-testing", Richard
      • Re: Re[4]: [ATM] Question about "Null-testing", Bob May
      • Re: [ATM] Question about "Null-testing", George Anderson
      • RE: Re[2]: [ATM] Question about "Null-testing", Richard Schwartz
      • Re: Re[2]: [ATM] Question about "Null-testing", mbartels
      • Re: [ATM] Question about "Null-testing", Mike Lockwood
      • Re: [ATM] Question about "Null-testing", hermit
      • Re: [ATM] Question about "Null-testing", mbartels
      • Re: [ATM] Question about "Null-testing", Scott Ewart
      • Re: [ATM] Question about "Null-testing", Mel Bartels
      • Re: [ATM] Question about "Null-testing", Don Clement
      • Re: [ATM] Question about "Null-testing", Mike Lockwood
      • Re: Re[2]: [ATM] Question about "Null-testing", Jeff Baldwin
      • Re: Re[2]: [ATM] Question about "Null-testing", Bill Kelley
    • RE: [ATM] Question about "Null-testing", Sanderson
      • Re[2]: [ATM] Question about "Null-testing", Richard
      • RE: [ATM] Question about "Null-testing", Ken Hunter
  • Re: [ATM] Question about "Null-testing", Michael Peck
  • Re: [ATM] Question about "Null-testing", Mel Bartels
    • Re: [ATM] Question about "Null-testing", John Moore
    • Re: [ATM] Question about "Null-testing", David Harbour
  • <Possible follow-up(s)>
  • RE: [ATM] Question about "Null-testing", Jerry
    • Re: [ATM] Question about "Null-testing", hermit
      • RE: [ATM] Question about "Null-testing", Jerry
      • RE: [ATM] Question about "Null-testing", John Moore
      • Re: [ATM] Question about "Null-testing", hermit
      • Re: [ATM] Question about "Null-testing", John Moore
      • Re: [ATM] Question about "Null-testing", hermit
      • RE: [ATM] Question about "Null-testing", Jerry
      • Re: [ATM] Question about "Null-testing", Ken Hunter
      • Re: [ATM] Question about "Null-testing", hermit
      • Re: [ATM] Question about "Null-testing", David Harbour
      • Re: [ATM] Question about "Null-testing", Don D'Egidio
      • Re: [ATM] Question about "Null-testing", David Harbour
      • Re: [ATM] Question about "Null-testing", Mel Bartels
  • Re: Re[2]: [ATM] Question about "Null-testing", matt
  • Re: Re[2]: [ATM] Question about "Null-testing", David Harbour
  • Re: [ATM] Question about "Null-testing", matt
  • RE: Re[2]: [ATM] Question about "Null-testing", Bernard Maugoust
• [ATM] R0 (the vertex radius) and the conical constant K for eachthe mirror, Shipping Dept
  • Re: [ATM] R0 (the vertex radius) and the conical constant K for eachthe mirror, Richard F.L.R. Snashall
    • Re: [ATM] R0 (the vertex radius) and the conical constant Kfor each the mirror, Michael Peck
  • Re: [ATM] R0 (the vertex radius) and the conical constant Kfor each the mirror, Jim Burrows
  • Re: [ATM] R0 (the vertex radius) and the conical constant K for eachthe mirror, Bernard Maugoust
• [ATM] Re: ATM Digest, Vol 19, Issue 8, jeff newsom
  • Re: [ATM] Re: ATM Digest, Vol 19, Issue 8, hermit
    • Re: [ATM] Re: ATM Digest, Vol 19, Issue 8, Ken Hunter
    • RE: [ATM] Is There a Difference, Richard Schwartz
  • Re: [ATM] Re: ATM Digest, Vol 19, Issue 8, Bob May
• [ATM] Re: Care Package Signup (Ken Hunter), COO
  • Re: [ATM] Re: Care Package Signup (Ken Hunter), Guy Brandenburg
  • Re: [ATM] Re: Care Package Signup (Ken Hunter), Ken Hunter
    • Re: [ATM] Re: Care Package Signup (Ken Hunter), John Lynch
• [ATM] Re: Difference 1/8 1/16 1/20 wave, vladimir sacek
  • Re: [ATM] Re: Difference 1/8 1/16 1/20 wave, John Moore
  • Re: [ATM] Re: Difference 1/8 1/16 1/20 wave, Mel Bartels
    • perfect optics, was Re: [ATM] Re: Difference 1/8 1/16 1/20 wave, Mel Bartels
  • Re: [ATM] Re: Difference 1/8 1/16 1/20 wave, Nils Olof Carlin
• [ATM] RE: difference 1/8 1/16 1/20 wave?, Jerry
  • Re: [ATM] RE: difference 1/8 1/16 1/20 wave?, Bob May
  • Re: [ATM] RE: difference 1/8 1/16 1/20 wave?, Ken Hunter
  • <Possible follow-up(s)>
  • [ATM] Re: Difference 1/8 1/16 1/20 wave?, vladimir sacek
    • Re: [ATM] Re: Difference 1/8 1/16 1/20 wave?, Nils Olof Carlin
• [ATM] Re: Gift to Pakistani ATMer, Ken Hunter
• [ATM] Re: Lap Plowing, jeff newsom
• Re: [ATM] RE: mirror grinding, Mel Bartels
  • <Possible follow-up(s)>
  • Re: [ATM] RE: mirror grinding, Ken Hunter
• [ATM] Re: pitch&Strehl, vladimir sacek
• [ATM] Re:(ATM) More on shop practices, jsgrmfg
• [ATM] RE:Refractors, Ellen Mackenzie
  • Re: [ATM] RE:Refractors, Guy Brandenburg
  • Re: [ATM] RE:Refractors, steve beccue
    • Re: [ATM] RE:Refractors, B. Bainbridge
      • Re: [ATM] RE:Refractors, steve beccue
  • Re: [ATM] RE:Refractors, Bob May
  • RE: [ATM] RE:Refractors, Jerry
  • RE: [ATM] RE:Refractors, Jerry
  • Re: [ATM] RE:Refractors, Richard F.L.R. Snashall
  • <Possible follow-up(s)>
  • Re: [ATM] RE:Refractors, john sherman
• [ATM] RE; Is there a difference, John Moore
• [ATM] RE; Trivia & Seeing, John Moore
• [ATM] RE;1/8,1/16-1/20th debate., John Moore
  • Re: [ATM] RE;1/8,1/16-1/20th debate., James Lerch
    • Re: [ATM] RE;1/8,1/16-1/20th debate., Michael Peck
      • Re: [ATM] RE;1/8,1/16-1/20th debate., Richard F.L.R. Snashall
      • Re: [ATM] RE;1/8,1/16-1/20th debate., James Lerch
    • Re: [ATM] RE;1/8,1/16-1/20th debate., Nils Olof Carlin
• [ATM] Refractor Lens Cell, aneves
  • Re: [ATM] Refractor Lens Cell, wb0poq
  • Re: [ATM] Refractor Lens Cell, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] Refractor Lens Cell, aneves
    • Re: [ATM] Refractor Lens Cell, Pete
• [ATM] Replying to digest messages, mdholm
  • Message not available
    • Message not available
      • Re: [ATM] Replying to digest messages, Bob May
      • Re: [ATM] Replying to digest messages, Guy Brandenburg
      • Re: [ATM] Replying to digest messages, Pat Bunn
      • Re: [ATM] Replying to digest messages, Ken Hunter
      • Re: [ATM] Replying to digest messages, Bob May
      • Re: [ATM] Replying to digest messages, hermit
      • Re: [ATM] Replying to digest messages, mdholm
      • Re: [ATM] Replying to digest messages, Vladimir Galogaza
• Re: [ATM] Sandblasting, richas
• Re: [ATM] shop practices, GARY FUCHS
• [ATM] shop practices., John Moore
  • Re: [ATM] shop practices., John Lynch
    • Re: [ATM] shop practices., Michael Lindner
      • Re: [ATM] shop practices., John Moore
      • Re: [ATM] shop practices., John Lynch
      • [ATM] Interferometric analysis of a mirror edge heated by hand for1 minute, Dale Eason
      • Re: [ATM] Interferometric analysis of a mirror edge heated by handfor 1 minute, Dale Eason
      • Re: [ATM] Interferometric analysis of a mirror edge heated by handfor 1 minute, Mark Holm
      • Re: [ATM] Interferometric analysis of a mirror edge heated by handfor 1 minute, Mark Holm
      • Re: [ATM] shop practices., Daniel Fundo
      • Re: [ATM] shop practices., John Lynch
  • Re: [ATM] shop practices., Ken Hunter
    • Re: [ATM] shop practices., John Moore
    • Re: [ATM] shop practices., Mark Holm
      • Re: [ATM] shop practices., Ken Hunter
      • Re: [ATM] shop practices., Jonathan Bishop
      • [ATM] Fixing oblate sphere/TDE (was shop practices), Mike Lockwood
      • [ATM] Shop Practices: yet another heresy, Richard Schwartz
• Re: [ATM] Shop Practices: yet another heresy, Bob May
  • Re: [ATM] Shop Practices: yet another heresy, Richard F.L.R. Snashall
    • Re: [ATM] Shop Practices: yet another heresy, John Moore
      • Re: [ATM] Shop Practices: yet another heresy, Bob May
    • Re: [ATM] Shop Practices: yet another heresy, Bob May
• [ATM] Star-test, John Moore
• [ATM] TDE, Ajnabiyar
  • Re: [ATM] TDE, John Moore
  • Re: [ATM] TDE, Bob May
• [ATM] TDE/TUE, rc virwani
  • Re: [ATM] TDE/TUE, John Moore
  • <Possible follow-up(s)>
  • [ATM] TDE/TUE, rc virwani
• [ATM] Tester question., John Moore
  • Re: [ATM] Tester question., Bob May
• [ATM] Testing arcticle, John Moore
• [ATM] Thaks mel, John Moore
• [ATM] The "Perfect mirror", John Moore
  • Re: [ATM] The "Perfect mirror", Ed Hood
    • Re: [ATM] The "Perfect mirror", John Moore
    • Re[2]: [ATM] The "Perfect mirror", Richard
• [ATM] The Perfect mirror, Russell Jocoy
• [ATM] TM magazine, Mike Lockwood
  • Re: [ATM] TM magazine, B. Bainbridge
    • Re: [ATM] TM magazine, John Moore
    • Re: [ATM] TM magazine, Michael Peck
      • Re: [ATM] TM magazine, Mike Shuken
      • Re: [ATM] TM magazine, Mike Lockwood
      • Re: [ATM] TM magazine, John Moore
      • Re: [ATM] TM magazine, Richard Schwartz
      • Re: [ATM] TM magazine, Ken Hunter
      • Re: [ATM] TM magazine, B. Bainbridge
      • [ATM] offsetting ROC, Jan van Gastel
      • Re: [ATM] offsetting ROC, Mike Lockwood
    • Re: [ATM] TM magazine, Ken Hunter
• [ATM] To Mel Bartels, John Moore
  • Re: [ATM] To Mel Bartels, Mel Bartels
• [ATM] To;First-time TM's, John Moore
• Re: [ATM] Tri-dob parallax?, Dave Smith
• [ATM] Tri-dob website is finally up!, Dave Smith
  • Re: [ATM] Tri-dob website is finally up!, John Moore
  • Re: [ATM] Tri-dob website is finally up!, Bob May
  • Re: [ATM] Tri-dob website is finally up!, Dave Smith
  • Re: [ATM] Tri-dob website is finally up! HONEST!, Dave Smith
    • Re: [ATM] Tri-dob website is finally up! HONEST!, Alan Scott
      • Re: [ATM] Tri-dob website is finally up! HONEST!, Mel Bartels
• [ATM] Trivia & Seeing., John Moore
  • Re: [ATM] Trivia & Seeing., Ken Hunter
  • RE: [ATM] Trivia & Seeing., Jerry
• [ATM] Ultra Thin blanks, Making the mold, vorblesnak
• [ATM] Upgrading a battered 10" Newt focuser, Martyn Cole
  • Re: [ATM] Upgrading a battered 10" Newt focuser, Don Ware
  • Re: [ATM] Upgrading a battered 10" Newt focuser, Don Clement
  • Re: [ATM] Upgrading a battered 10" Newt focuser, Bob
    • Re: [ATM] Upgrading a battered 10" Newt focuser, Martyn Cole
      • Re: [ATM] Upgrading a battered 10" Newt focuser, Bob
  • Re: [ATM] Upgrading a battered 10" Newt focuser, Martyn Cole
  • Re: [ATM] Upgrading a battered 10" Newt focuser, Daniel Fundo
  • <Possible follow-up(s)>
  • [ATM] Upgrading a battered 10" Newt focuser, Thomas A Simmons
• [ATM] Using Silicon For A Telescope Mirror, Ed D.
• [ATM] Wave war, Russell Jocoy
  • [ATM] RE: Wave war, Jerry
• [ATM] which Collimination tools?, John Moore
  • Re: [ATM] which Collimination tools?, Bob May
  • Re: [ATM] which Collimination tools?, Ken Hunter
  • Re: [ATM] which Collimination tools?, Jan van Gastel
    • Re: [ATM] which Collimination tools?, John Moore
      • Re: [ATM] which Collimination tools?, Bruce MacDonald
      • Re: [ATM] which Collimination tools?, Jan van Gastel
      • Re: [ATM] which Collimination tools?, John Moore
• [ATM] Why is it called a "flex rocker"?, Dowd(s)
  • Re: [ATM] Why is it called a "flex rocker"?, Dave Smith
  • <Possible follow-up(s)>
  • Re: [ATM] Why is it called a "flex rocker"?, john sherman
    • RE: [ATM] Why is it called a "flex rocker"?, Peter
  • RE: [ATM] Why is it called a "flex rocker"?, john sherman
  • Re: [ATM] Why is it called a "flex rocker"?, Dowd(s)
    • Re: [ATM] Why is it called a "flex rocker"?, Dave Smith
      • Re: [ATM] Why is it called a "flex rocker"?, Mel Bartels
      • Re: [ATM] Why is it called a "flex rocker"?, Vladimir Galogaza
      • Re: [ATM] Why is it called a "flex rocker"?, Dave Smith
      • Re: [ATM] Why is it called a "flex rocker"?, Mel Bartels
      • Re: [ATM] Why is it called a "flex rocker"?, Dave Smith
      • Re: [ATM] Why is it called a "flex rocker"?, Don Clement
  • Re: [ATM] Why is it called a "flex rocker"?, NGC704
• Bank Of The West - Protect Yourself Against Fraud, Bank Of The West
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data
• SEC: UNCLASSIFIED:- [ATM] Can a Trilateral Dob be computer Operated?, Andrew.Martyn
  • Re: SEC: UNCLASSIFIED:- [ATM] Can a Trilateral Dob be computerOperated?, Mark Holm
    • Re: SEC: UNCLASSIFIED:- [ATM] Can a Trilateral Dob becomputerOperated?, Mel Bartels
• Subject: Re: [ATM] Acculap vs Gugolz, mdholm