[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Industrial-strength mirror sling

To: "Alan K. Henderson" <atm@atmlist.net>
Subject: Re: [ATM] Industrial-strength mirror sling
From: Richard <cnc@cncservo.co.uk>
Date: Tue, 12 Jul 2005 14:03:33 +0100
In-Reply-To: <009301c5866c$85f65330$ccdb28d8@alan>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <009301c5866c$85f65330$ccdb28d8@alan>
Reply-To: Richard <cnc@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

Hi Alan,

Tuesday, July 12, 2005, 12:01:50 AM, you wrote:

AKH> One of the challenges of working with a
AKH> full-thickness 16.5" mirror is coming up with a lower edge
AKH> support system that will support 50 pounds of Pyrex.

How about a car safety belt from a scrap yard. It will support
the full thickness so spread the load, and is light and very
strong.

-- 

Best regards,
  Richard in the UK



_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Industrial-strength mirror sling
  - From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>

References:
- [ATM] Industrial-strength mirror sling
  - From: "Alan K. Henderson" <alankh@ev1.net>

Prev by Author: Re[2]: [ATM] over&under correction.
Next by Author: Re[2]: [ATM] The "Perfect mirror"
Prev by thread: Re[2]: [ATM] Industrial-strength mirror sling
Next by thread: Re: [ATM] Industrial-strength mirror sling
Index(es):
- Author
- Thread