Amateur Telescope Makers (ATM) Archive for JUL05 - by author

• Thread Index

• [ATM] TDE
  • From: Ajnabiyar <ajnabiyar@yahoo.com>
• [ATM] Industrial-strength mirror sling
  • From: "Alan K. Henderson" <alankh@ev1.net>
• Re: [ATM] Industrial-strength mirror sling
  • From: "Alan K. Henderson" <alankh@ev1.net>
• [ATM] From mirror support to the frame
  • From: "Alan K. Henderson" <alankh@ev1.net>
• Re: [ATM] From mirror support to the frame
  • From: "Alan K. Henderson" <alankh@ev1.net>
• RE: [ATM] dob balance
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] Tri-dob website is finally up! HONEST!
  • From: "Alan Scott" <alanne1956@hotmail.com>
• SEC: UNCLASSIFIED:- [ATM] Can a Trilateral Dob be computer Operated?
  • From: Andrew.Martyn@defence.gov.au
• Re: [ATM] mirror grinding
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re[2]: [ATM] Question about "Null-testing"
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] more on cassegrain baffling...
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Industrial-strength mirror sling
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Industrial-strength mirror sling
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Refractor Lens Cell
  • From: aneves@snowsoft.biz
• Re: [ATM] Refractor Lens Cell
  • From: aneves@snowsoft.biz
• Re: [ATM] Artificial-star w/fiber-optics
  • From: aplanatic@aol.com
• [ATM] Gimbaled Secondary mirror (report)
  • From: <atm@hudler.org>
• Re: [ATM] Gimbaled Secondary mirror (report)
  • From: <atm@hudler.org>
• Re: [ATM] TM magazine
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: [ATM] TM magazine
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: [ATM] RE:Refractors
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Bank Of The West - Protect Yourself Against Fraud
  • From: "Bank Of The West" <services@bankofthewest.com>
• [ATM] Cassegrain baffle design
  • From: "Benoit Schillings" <benoit.schillings@openwave.com>
• [ATM] more on cassegrain baffling...
  • From: "Benoit Schillings" <benoit.schillings@openwave.com>
• RE: Re[2]: [ATM] Question about "Null-testing"
  • From: Bernard Maugoust <maugoust@free.fr>
• Re: [ATM] R0 (the vertex radius) and the conical constant K for eachthe mirror
  • From: Bernard Maugoust <maugoust@free.fr>
• [ATM] Mels Drives
  • From: "Bill Hollenbach" <wjh1@absamail.co.za>
• Re: Re[2]: [ATM] Question about "Null-testing"
  • From: "Bill Kelley" <flex@commspeed.net>
• Fw: [ATM] over&under correction.
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] First mail to atm list
  • From: Bill Marriott <bmarriott@pacbell.net>
• Re: [ATM] dob motor.
  • From: Bill Marriott <bmarriott@pacbell.net>
• Re: [ATM] over&under correction.
  • From: Bob <astropabob@yahoo.com.au>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: Bob <astropabob@yahoo.com.au>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: Bob <astropabob@yahoo.com.au>
• Re: [ATM] Gimbaled Secondary mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Focusing Help
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Question about "Null-testing"
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] mirror grinding
  • From: "Bob May" <bobmay@nethere.com>
• Re: Re[4]: [ATM] Question about "Null-testing"
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] mirror grinding
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] In-Search-off the "Star Test"
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Gimbaled Secondary mirror (report)
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] dob balance
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: ATM Digest, Vol 19, Issue 8
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Gimbaled Secondary mirror (report)
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Replying to digest messages
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] RE: difference 1/8 1/16 1/20 wave?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] more on cassegrain baffling...
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] 12.5 inches BVC parabolizing : looks good
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Replying to digest messages
  • From: "Bob May" <bobmay@nethere.com>
• Re: RE: Re[2]: [ATM] over&under correction. IS: ATMLISTresponseprotocol
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Refractor Lens Cell
  • From: "Bob May" <bobmay@nethere.com>
• Re: Re[2]: [ATM] over&under correction.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] TDE
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] over&under correction. IS: ATMLIST responseprotocol
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First mail to atm list
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Tester question.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Patterns of Testing: how we are messing up the hobby
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First mail to atm list: "inbetween"grits
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM from Paqkistan
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM from Paqkistan
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Shop Practices: yet another heresy
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] cylindrical mirror grinding
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Shop Practices: yet another heresy
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Shop Practices: yet another heresy
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Glass Types
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Optics design and vignetting
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] new pits keep appearing
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Here's a new one
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Pitch lap
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] figuring 10 inch mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] dob motor.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] which Collimination tools?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] figuring 10 inch mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Tri-dob website is finally up!
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] RE:Refractors
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] lurie-houghton progress
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Arcticle trade.
  • From: Brian William Bainbridge <brianb@u.washington.edu>
• Re: [ATM] which Collimination tools?
  • From: Bruce MacDonald <brumac@gmail.com>
• [ATM] Mirror F/L
  • From: "c f" <quantemlp@hotmail.com>
• [ATM] Pitch lap
  • From: "Cec & Cris" <ccabar@bigpond.com>
• [ATM] lap plowing
  • From: Chuck Meaney <chuckmean1@sbcglobal.net>
• Re: [ATM] over&under correction.
  • From: Clive Rogers <c.rogers@ntlworld.com>
• [ATM] Collimating from the eyepiece.
  • From: Clive Rogers <c.rogers@ntlworld.com>
• Re: [ATM] Collimating from the eyepiece.
  • From: Clive Rogers <c.rogers@ntlworld.com>
• [ATM] Re: Care Package Signup (Ken Hunter)
  • From: COO <coo_mo@yahoo.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Test stand astig., edge support
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Test stand astig., edge support
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Interferometric analysis of a mirror edge heated by hand for1 minute
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Interferometric analysis of a mirror edge heated by handfor 1 minute
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Of Men and Honor
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] over&under correction. IS: ATMLIST responseprotocol
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] shop practices.
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Patterns of Testing: how we are messing up the hobby
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Of Men and Honor
  • From: "Darius Blaszijk" <dhkblaszyk@zeelandnet.nl>
• Fw: [ATM] Of Men and Honor
  • From: "Darius Blaszijk" <dhkblaszyk@zeelandnet.nl>
• Re: [ATM] First mail to atm list
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: Fwd: Re: [ATM] ATM from Paqkistan
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Can a Trilateral Dob be computer Operated? (longish reply)
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Can a Trilateral Dob be computer Operated? (longish reply)
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] binoviewer question
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] Tri-dob website is finally up!
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Tri-dob website is finally up!
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Tri-dob website is finally up! HONEST!
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Tri-dob parallax?
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Help with star test interpretation - TUE,SA or something else?
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Milligan interferometry report
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: Razor Blades (primer)
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] mirror grinding
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Question about "Null-testing"
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] ATM: Razor Blades (primer)
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Question about "Null-testing"
  • From: "David Harbour" <scarab2@cox.net>
• Re: Re[2]: [ATM] Question about "Null-testing"
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Question about "Null-testing"
  • From: "David Harbour" <scarab2@cox.net>
• Re: Re[2]: [ATM] Question about "Null-testing"
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Apooligies
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Gimbaled Secondary mirror
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Gimbaled Secondary mirror
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Question about "Null-testing"
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Question about "Null-testing"
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: "Don Ware" <mimas@charter.net>
• [ATM] Optics design and vignetting
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Optics design and vignetting
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] Can a Trilateral Dob be computer Operated?
  • From: "Dowd(s)" <kd14349@alltel.net>
• [ATM] Why is it called a "flex rocker"?
  • From: "Dowd(s)" <kd14349@alltel.net>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: "Dowd(s)" <kd14349@alltel.net>
• [ATM] Using Silicon For A Telescope Mirror
  • From: "Ed D." <ed1234@cox.net>
• Re: [ATM] The "Perfect mirror"
  • From: "Ed Hood" <ed@aes1.com>
• [ATM] RE:Refractors
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• Re: [ATM] shop practices
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] First mail to atm list
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] First mail to atm list: "inbetween"grits
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] points to ponder.
  • From: Gary Woods <garygarlic@earthlink.net>
• Re: [ATM] Question about "Null-testing"
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] 12.5 inches BVC mirror - more details
  • From: George Anderson <tillerman1@videotron.ca>
• Re: Fine points o'grammer 'n' spellin (was: RE: Re[2]: [ATM]over&undercorrection.)
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] OT:The four observers (humour)
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Patterns of Testing: how we are messing up the hobby
  • From: George Anderson <tillerman1@videotron.ca>
• re: [ATM] Care Package Signup
  • From: GF <gary@rcn.com>
• Re: [ATM] First mail to atm list: "inbetween"grits
  • From: GF <gary@rcn.com>
• [ATM] Figuring Long Radius Mirrors
  • From: "Greg Jones" <gregj888@comcast.net>
• Re: [ATM] mirror grinding
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Replying to digest messages
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Fine points o'grammer 'n' spellin (was: RE: Re[2]: [ATM] over&undercorrection.)
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Re: Care Package Signup (Ken Hunter)
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] mirror-makers in India
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] lurie-houghton progress
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Pitch lap
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] RE:Refractors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] lurie-houghton progress
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] lurie-houghton progress
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Question about "Null-testing"
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Question about "Null-testing"
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Question about "Null-testing"
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Question about "Null-testing"
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Question about "Null-testing"
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Question about "Null-testing"
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Re: ATM Digest, Vol 19, Issue 8
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Replying to digest messages
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] lap plowing
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] ATM from Paqkistan
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] figuring 10 inch mirror
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring
  • From: Hugues.Laroche@ses-astra.com
• Re: [ATM] Can a Trilateral Dob be computer Operated?
  • From: Hugues.Laroche@ses-astra.com
• Re: [ATM] RE;1/8,1/16-1/20th debate.
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Is There a Difference
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Is There a Difference
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: Re[2]: [ATM] Is There a Difference
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] RE;1/8,1/16-1/20th debate.
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Industrial-strength mirror sling
  • From: "Jan van gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] From mirror support to the frame
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• [ATM] offsetting ROC
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] which Collimination tools?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] which Collimination tools?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Care Package Signup
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] binoviewer question
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] BVC Blanks
  • From: Jason Hissong <jhissong@gmail.com>
• Re: [ATM] BVC Blanks
  • From: Jason Hissong <jhissong@gmail.com>
• [ATM] Fw: [esa_general] The unfolding space telescope
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• [ATM] Higher readings on one axis...
  • From: "Jean-yves Lauture" <jylauture@sympatico.ca>
• Re: [ATM] Higher readings on one axis...
  • From: "Jean-yves Lauture" <jylauture@sympatico.ca>
• [ATM] Higher readings on one axis (2)...
  • From: "Jean-yves Lauture" <jylauture@sympatico.ca>
• Re: [ATM] mirror grinding
  • From: "Jeff Baldwin" <bald@olypen.com>
• Re: Re[2]: [ATM] Question about "Null-testing"
  • From: "Jeff Baldwin" <bald@olypen.com>
• Re: [ATM] pitch&strehl.
  • From: "Jeff Baldwin" <bald@olypen.com>
• [ATM] Re: ATM Digest, Vol 19, Issue 8
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] Re: Lap Plowing
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] (no subject)
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Question about "Null-testing"
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Question about "Null-testing"
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Question about "Null-testing"
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] difference 1/8 1/16 1/20 wave?
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] John Dobson and a "glint of sunlight off of a raven's eye..."
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Is There a Difference
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Trivia & Seeing.
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Is There a Difference
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] RE: difference 1/8 1/16 1/20 wave?
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] 12.5 inches BVC mirror - more details
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] RE: Wave war
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] difference 1/8 1/16 1/20 wave?
  • From: "Jerry" <wa4guu@verizon.net>
• RE: Re[2]: [ATM] over&under correction.
  • From: "Jerry" <wa4guu@verizon.net>
• RE: Re[2]: [ATM] over&under correction.
  • From: "Jerry" <wa4guu@verizon.net>
• RE: Fine points o'grammer 'n' spellin (was: RE: Re[2]:[ATM]over&undercorrection.)
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Pitch lap
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] figuring 10 inch mirror
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] figuring 10 inch mirror
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] figuring 10 inch mirror
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] RE:Refractors
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] RE:Refractors
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: Jerry Dove <jldove1@cableone.net>
• [ATM] cylindrical mirror grinding
  • From: "Jess Tauber" <phonosemantics@earthlink.net>
• Re: [ATM] R0 (the vertex radius) and the conical constant Kfor each the mirror
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Milligan interferometry report
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] over&under correction.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] pitch&strehl.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] ATM from Paqkistan
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Higher readings on one axis...
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] figuring 10 inch mirror
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Higher readings on one axis (2)...
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] shop practices.
  • From: John Lynch <john_lynch2005@yahoo.com>
• Re: [ATM] shop practices.
  • From: John Lynch <john_lynch2005@yahoo.com>
• Re: [ATM] First mail to atm list
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] More on shop practices
  • From: John Lynch <john_lynch2005@yahoo.com>
• Re: [ATM] shop practices.
  • From: John Lynch <john_lynch2005@yahoo.com>
• Re: [ATM] Re: Care Package Signup (Ken Hunter)
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] Question about "Null-testing"
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Question about "Null-testing"
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Testing arcticle
  • From: John Moore <jamoore42@yahoo.com>
• RE: [ATM] Question about "Null-testing"
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Question about "Null-testing"
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Question about "Null-testing"
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Star-test
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] In-Search-off the "Star Test"
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Artificial-star w/fiber-optics
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] To;First-time TM's
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] RE;1/8,1/16-1/20th debate.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Trivia & Seeing.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] RE; Is there a difference
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] RE; Trivia & Seeing
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] over&under correction.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] over&under correction.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Thaks mel
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] over&under correction.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] To Mel Bartels
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] over&under correction.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: John Moore <jamoore42@yahoo.com>
• RE: [ATM] difference 1/8 1/16 1/20 wave?
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] The "Perfect mirror"
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] The "Perfect mirror"
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Re: Difference 1/8 1/16 1/20 wave
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] pitch&strehl.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] pitch&strehl.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] TDE
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Anote on replying to digest messages, et. al.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] pitch&strehl.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] pitch&strehl.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] shop practices.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] TDE/TUE
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] pitch&strehl.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] points to ponder.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] points to ponder.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] points to ponder.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] shop practices.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] shop practices.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Tester question.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] lap plowing
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Arcticle trade.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Arcticle trade.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Shop Practices: yet another heresy
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] TM magazine
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] TM magazine
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] Pits,,, A Tip!
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Higher readings on one axis...
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Best of ATMJ?
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] dob motor.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] dob motor.
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] which Collimination tools?
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] which Collimination tools?
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] which Collimination tools?
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Tri-dob website is finally up!
  • From: John Moore <jamoore42@yahoo.com>
• [ATM] A Tip for Beginners.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Higher readings on one axis (2)...
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Higher readings on one axis (2)...
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] A Tip for Beginners.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] A Tip for Beginners.
  • From: John Moore <jamoore42@yahoo.com>
• Re: [ATM] Help with star test interpretation - TUE,SA or something else?
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: "john sherman" <atm@mail.johnspics.com>
• [ATM] mirror testers
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] binoviewer question
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] RE:Refractors
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: "john sherman" <atm@mail.johnspics.com>
• RE: [ATM] Why is it called a "flex rocker"?
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] shop practices.
  • From: Jonathan Bishop <jonathan_bishop@sbcglobal.net>
• Re: [ATM] Mirror F/L
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• Re: [ATM] BVC Blanks
  • From: Jonathan Lavoie <atm@lavoielactee.net>
• [ATM] Re:(ATM) More on shop practices
  • From: jsgrmfg@gracemfg.com
• Re: [ATM] RE: mirror grinding
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Question about "Null-testing"
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: ATM Digest, Vol 19, Issue 8
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Trivia & Seeing.
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] RE: difference 1/8 1/16 1/20 wave?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] Question about "Null-testing"
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Replying to digest messages
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] shop practices.
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] shop practices.
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] First mail to atm list
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] First mail to atm list
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Care Package Signup
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Care Package Signup
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: Care Package Signup (Ken Hunter)
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: Fwd: Re: [ATM] ATM from Paqkistan
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Care Package Signup (UPDATE)
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Re: Gift to Pakistani ATMer
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Care Package Signup
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] new pits keep appearing
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] TM magazine
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] TM magazine
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Here's a new one
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] dob motor.
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] Here's a new one
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] which Collimination tools?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Here's a new one
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Package to Mahmood...
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Milligan interferometry report
  • From: Ken Lowther <hermit@outofoptions.org>
• [ATM] Here's a new one
  • From: "Ken Reid" <ken_reid@telus.net>
• Re: [ATM] Here's a new one
  • From: "Ken Reid" <ken_reid@telus.net>
• Re: [ATM] Experiments in Cassegrain mirror spacing
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: [ATM] more on cassegrain baffling...
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: [ATM] Patterns of Testing: how we are messing up the hobby
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: [ATM] lurie-houghton progress
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• RE: [ATM] Help with star test interpretation - TUE,SA or something else?
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Milligan interferometry report
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• [ATM] dob balance
  • From: "lance clarke" <alaskawolfjoe@hotmail.com>
• [ATM] First mail to atm list
  • From: Mahmood Hassan <emhl95@yahoo.com>
• [ATM] ATM from Paqkistan
  • From: Mahmood Hassan <emhl95@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] Package to Mahmood...
  • From: "Malcolm Macdonald" <toliman@wave.co.nz>
• Re: [ATM] pitch&strehl.
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] over&under correction. IS: ATMLIST responseprotocol
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] pitch&strehl.
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] shop practices.
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Interferometric analysis of a mirror edge heated by handfor 1 minute
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Interferometric analysis of a mirror edge heated by handfor 1 minute
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] From mirror support to the frame
  • From: Mark Holm <mdholm@telerama.com>
• Re: SEC: UNCLASSIFIED:- [ATM] Can a Trilateral Dob be computerOperated?
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Glass Types
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] figuring 10 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Upgrading a battered 10" Newt focuser
  • From: Martyn Cole <mgc@dsl.pipex.com>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: Martyn Cole <mgc@dsl.pipex.com>
• Re: [ATM] Upgrading a battered 10" Newt focuser
  • From: Martyn Cole <mgc@dsl.pipex.com>
• Re: [ATM] Gimbaled Secondary mirror
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Re[2]: [ATM] Question about "Null-testing"
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Question about "Null-testing"
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Industrial-strength mirror sling
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Industrial-strength mirror sling
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] From mirror support to the frame
  • From: "matt" <electro_optic@bellsouth.net>
• Fwd: Re: [ATM] ATM from Paqkistan
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• Re: Re[2]: [ATM] Question about "Null-testing"
  • From: mbartels@bbastrodesigns.com
• Re: [ATM] Question about "Null-testing"
  • From: mbartels@bbastrodesigns.com
• Subject: Re: [ATM] Acculap vs Gugolz
  • From: mdholm@telerama.com
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: mdholm@telerama.com
• [ATM] Replying to digest messages
  • From: mdholm@telerama.com
• Re: [ATM] Industrial-strength mirror sling
  • From: mdholm@telerama.com
• Re: [ATM] Replying to digest messages
  • From: mdholm@telerama.com
• Re: [ATM] RE: mirror grinding
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] mirror grinding
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Question about "Null-testing"
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Question about "Null-testing"
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Question about "Null-testing"
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] over&under correction.
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Re: Difference 1/8 1/16 1/20 wave
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] To Mel Bartels
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• perfect optics, was Re: [ATM] Re: Difference 1/8 1/16 1/20 wave
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] pitch&strehl.
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Patterns of Testing: how we are messing up the hobby
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: SEC: UNCLASSIFIED:- [ATM] Can a Trilateral Dob becomputerOperated?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Can a Trilateral Dob be computer Operated? (longish reply)
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Tri-dob website is finally up! HONEST!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Anote on replying to digest messages, et. al.
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] shop practices.
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Milligan interferometry report
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Milligan interferometry report
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Question about "Null-testing"
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] R0 (the vertex radius) and the conical constant Kfor each the mirror
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Cassegrain baffle design
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] difference 1/8 1/16 1/20 wave?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] more on cassegrain baffling...
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] RE;1/8,1/16-1/20th debate.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] over&under correction.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• RE: [ATM] over&under correction.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Test stand astig., edge support
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Test stand astig., edge support
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Optics design and vignetting
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] mirror testers
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] TM magazine
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Experiments in Cassegrain mirror spacing
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Question about "Null-testing"
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Question about "Null-testing"
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Milligan interferometry report
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] more on cassegrain baffling...
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] over&under correction.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Test stand astig., edge support
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] pitch&strehl.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] points to ponder.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Fixing oblate sphere/TDE (was shop practices)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Collimating from the eyepiece.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] TM magazine
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] TM magazine
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] offsetting ROC
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Higher readings on one axis...
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Higher readings on one axis (2)...
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] TM magazine
  • From: Mike Shuken <mikeshuken@value.net>
• Re: [ATM] over&under correction.
  • From: "Mike Spooner" <spoon@PageAmerica.net>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: NGC704@aol.com
• Re: [ATM] RE;1/8,1/16-1/20th debate.
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Re: Difference 1/8 1/16 1/20 wave
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Industrial-strength mirror sling
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Industrial-strength mirror sling
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Test stand astig., edge support
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Re: Difference 1/8 1/16 1/20 wave?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] pitch&strehl.
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] From mirror support to the frame
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Milligan interferometry report
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Collimating, the eccentric way
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] Of Men and Honor
  • From: ntent <ntent@pctcnet.net>
• Re: [ATM] Replying to digest messages
  • From: "Pat Bunn" <pbunn@patbunn.com>
• Re: [ATM] Care Package Signup
  • From: "Pat Bunn" <pbunn@patbunn.com>
• Re: [ATM] Care Package Signup
  • From: "Pat Bunn" <pbunn@patbunn.com>
• [ATM] new pits keep appearing
  • From: "Paul Grapendaal" <guardian@reaper.org>
• Re: [ATM] Refractor Lens Cell
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Here's a new one
  • From: Pete <lenses@adelphia.net>
• RE: [ATM] Industrial-strength mirror sling
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Here's a new one
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Here's a new one
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Why is it called a "flex rocker"?
  • From: "Peter" <peter@kitgear.com>
• [ATM] TDE/TUE
  • From: rc virwani <rc_virwani@yahoo.com>
• [ATM] TDE/TUE
  • From: rc virwani <rc_virwani@yahoo.com>
• Re[2]: [ATM] Question about "Null-testing"
  • From: Richard <cnc@cncservo.co.uk>
• Re[4]: [ATM] Question about "Null-testing"
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Gimbaled Secondary mirror (report)
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Is There a Difference
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Question about "Null-testing"
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] over&under correction.
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] over&under correction.
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] over&under correction.
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Industrial-strength mirror sling
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] The "Perfect mirror"
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Industrial-strength mirror sling
  • From: Richard <cnc@cncservo.co.uk>
• Re[5]: [ATM] over&under correction. IS: ATMLIST responseprotocol
  • From: Richard <cnc@cncservo.co.uk>
• Re[4]: [ATM] over&under correction.
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] 12.5 inches BVC advice for parabolizing
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Glass Types
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] lurie-houghton progress
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] Inner Curves of a Doublet or Triplet
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Plate FEA Resource
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Design Tool (longish)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] R0 (the vertex radius) and the conical constant K for eachthe mirror
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Is There a Difference
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Is There a Difference
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Is There a Difference
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] RE;1/8,1/16-1/20th debate.
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Shop Practices: yet another heresy
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] RE:Refractors
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] lurie-houghton progress
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• RE: Re[2]: [ATM] Question about "Null-testing"
  • From: "Richard Schwartz" <richas@earthlink.net>
• RE: [ATM] Is There a Difference
  • From: "Richard Schwartz" <richas@earthlink.net>
• [ATM] Shop Practices: yet another heresy
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] TM magazine
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Sandblasting
  • From: richas@earthlink.net
• Re: [ATM] ATM: Razor Blades (primer)
  • From: richas@earthlink.net
• [ATM] 12.5 inches BVC mirror polishing and figuring difficulties
  • From: "RM L" <atm@axeinformatique.com>
• [ATM] 12.5 inches BVC mirror - more details
  • From: "RM L" <atm@axeinformatique.com>
• [ATM] 12.5 inches BVC mirror update - new photos
  • From: "RM L" <atm@axeinformatique.com>
• [ATM] 12.5 inches BVC parabolizing : looks good
  • From: "RM L" <atm@axeinformatique.com>
• [ATM] 12.5 inches BVC advice for parabolizing
  • From: "RM L" <atm@axeinformatique.com>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: "RM L" <atm@axeinformatique.com>
• [ATM] Best of ATMJ?
  • From: "Rob" <polaris@gsinet.net>
• [ATM] conical 11" mirror
  • From: "Rob" <polaris@gsinet.net>
• Re: [ATM] Collimating, the eccentric way
  • From: "Rob&DonnaF" <TheFifareks@cox.net>
• RE: [ATM] Care Package Signup
  • From: "Robert Haler" <bhaler@lymax.com>
• [ATM] Wave war
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] The Perfect mirror
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• RE: [ATM] Question about "Null-testing"
  • From: "Sanderson" <mldsub@earthlink.net>
• Re: [ATM] Question about "Null-testing"
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] dob balance
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: Fwd: Re: [ATM] ATM from Paqkistan
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Collimating from the eyepiece.
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Pits,,, A Tip!
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Higher readings on one axis...
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] figuring 10 inch mirror
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] figuring 10 inch mirror
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• RE: [ATM] over&under correction.
  • From: "Scott Milligan" <starzkey@charter.net>
• Was: RE: Re[2]: [ATM] over&under correction. IS: ATMLIST responseprotocol
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] R0 (the vertex radius) and the conical constant K for eachthe mirror
  • From: Shipping Dept <m1s@mc.net>
• Re: [ATM] Care Package Signup
  • From: Stan Truitt <s.truitt@verizon.net>
• Re: [ATM] RE:Refractors
  • From: steve beccue <lsteve@Beccue.com>
• Re: [ATM] RE:Refractors
  • From: steve beccue <lsteve@Beccue.com>
• [ATM] Upgrading a battered 10" Newt focuser
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• Re: [ATM] points to ponder.
  • From: "Thomas A. Moulton" <tom@moulton.us>
• RE: [ATM] Glass Types
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• [ATM] FW: [AR] OT: 10th Planet Discovered
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: [ATM] First mail to atm list
  • From: "Tom and Beth" <milliesand@cox.net>
• [ATM] Glass Types
  • From: "Tom Moulton" <tom@moulton.us>
• Re: [ATM] A Tip for Beginners.
  • From: "Tom Moulton" <tom@moulton.us>
• Re: [ATM] 12.5 inches BVC advice for parabolizing
  • From: "Virgil.Johnson" <virgilaj@charter.net>
• Re: [ATM] Replying to digest messages
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Industrial-strength mirror sling
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Package to Mahmood...
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Why is it called a "flex rocker"?
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• [ATM] Re: Difference 1/8 1/16 1/20 wave
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Re: Difference 1/8 1/16 1/20 wave?
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Re: pitch&Strehl
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Ultra Thin blanks, Making the mold
  • From: vorblesnak@peak.org
• Re: [ATM] Care Package Signup
  • From: vorblesnak@peak.org
• [ATM] figuring 10 inch mirror
  • From: Wayne Hilliard <woodycxd@adelphia.net>
• Re: [ATM] figuring 10 inch mirror
  • From: Wayne Hilliard <woodycxd@adelphia.net>
• Re: [ATM] figuring 10 inch mirror
  • From: Wayne Hilliard <woodycxd@adelphia.net>
• Re: [ATM] figuring 10 inch mirror
  • From: Wayne Hilliard <woodycxd@adelphia.net>
• Re: [ATM] figuring 10 inch mirror
  • From: Wayne Hilliard <woodycxd@adelphia.net>
• Re: [ATM] Refractor Lens Cell
  • From: wb0poq@visi.com
• Foo: Re: Re[2]: [ATM] over&under correction.
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Best of ATMJ?
  • From: Woodchuck <djv@bedford.net>