RE: [ATM] Turned Down Edge

["Jerry" <wa4guu@verizon.net>]

No! Very likely!

Jerry

-----Original Message-----
From: atm-bounces@atmlist.net [mailto:atm-bounces@atmlist.net] On Behalf Of
Jonathan Bishop
Sent: Wednesday, July 14, 2004 12:44 AM
To: Michael Lindner; The Amateur Telescope Makers List
Subject: Re: [ATM] Turned Down Edge

True, but much less likely!

Jon Bishop

----- Original Message -----
From: "Michael Lindner" <mikell@optonline.net>
To: "Jonathan Bishop" <jonathan_bishop@sbcglobal.net>; "The Amateur
Telescope Makers List" <atm@atmlist.net>
Sent: Tuesday, July 13, 2004 6:20 PM
Subject: Re: [ATM] Turned Down Edge


> On Tuesday 13 July 2004 11:56 am, Jonathan Bishop wrote:
> > You can experiment with sub diameter lap. This is usually done with TOT.
If
> > you stay away from the edge you will never produce a turned down edge
this
> > way.
>
> Oh yeah! I can produce TDE lots of ways! :-)
>
> If you never touch the edge, but deepen the center, you are, in effect,
> turning the edge (without touching it).
>
> --
> Michael Lindner
> http://www.starastronomy.org *** http://home.att.net/~mikel
> http://www.atmsite.org *** http://www.atmlist.net
>

_______________________________________________
ATM mailing list http://www.atmlist.net/


_______________________________________________
ATM mailing list http://www.atmlist.net/