[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Re: PLOP Calculations

To: <atm@atmlist.net>
Subject: [ATM] Re: PLOP Calculations
From: "Steve Houlihan" <sho@surfnetUSA.com>
Date: Sat, 3 Jul 2004 17:48:59 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <002c01c46099$f1f0cf10$7301a8c0@hyperion><002c01c46099$f1f0cf10$7301a8c0@hyperion> <5.2.0.9.1.20040702211428.00a230e0@pvtnetworks.net><008601c460dd$477f23d0$5538fcc3@HUVUD><a05210600bd0cd11ced9f@[209.179.210.79]>
Sender: atm-bounces@atmlist.net

Nobody has mentioned using the "Automatic Cell Design" feature of Plop.  How
far off are the parts when using this simple program?

Steve Houlihan
Santa Cruz, California

sho@SurfnetUSA.com
http://www.surfnetusa.com/sho


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Re: PLOP Calculations
  - From: Andy Saulietis <iss@pvtnetworks.net>

References:
- [ATM] PLOP Calculations
  - From: "Jacob Lauser" <sirius@riverstyx.com>
- Re: [ATM] PLOP Calculations
  - From: Andy Saulietis <iss@pvtnetworks.net>
- Re: [ATM] PLOP Calculations
  - From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: [ATM] PLOP Calculations
  - From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>

Prev by Author: [ATM] just a test
Next by Author: Re: [ATM] Carbon Fiber Truss tubes
Prev by thread: Re: [ATM] PLOP Calculations
Next by thread: Re: [ATM] Re: PLOP Calculations
Index(es):
- Author
- Thread