[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM home made secondary holders >NO< spider

To: <atm@shore.net>
Subject: Re: ATM home made secondary holders >NO< spider
From: "Bob May" <bobmay@nethere.com>
Date: Tue, 10 Jul 2001 10:41:09 -0700
References: <OFEFAD40A2.7F9B12BF-ON07256A84.006A3C18@rsc.raytheon.com>
Reply-To: "Bob May" <bobmay@nethere.com>
Sender: owner-atm@shore.net


You could always make the screws drive wedges which drive pins to move the
secondary.  A 30deg. slope will allow for a finer adjustment of the
secondary and if you do things right, you will also be able to adjust all 3
screws from the same hole in the side of the scope.  I also suggest you do
funnels and use Phillips Head screws for the adjustment screws.
Bob May
http://nav.to/bobmay
bobmay@nethere.com

References:
- ATM home made secondary holders >NO< spider
  - From: "Thomas A Simmons" <tasimmons@west.raytheon.com>

Prev by Author: Re: ATM 90mm f-11 APO
Next by Author: Re: ATM Re: How to make accurate holes with hand drill?
Prev by thread: ATM home made secondary holders >NO< spider
Next by thread: ATM home made secondary holders and spiders
Index(es):
- Author
- Thread