RE:ATM (More!) tile tool questions

[SHANE LAPIERRE <SLAPIERR@bcbsct.com>]

Brian,

I just made a tool for my first 8" a couple of weeks ago.  I turned glazed tiles upside 
down, and it's working fine.  I'm about to start w/ 12 micron size, and the tile is 
holding up very well.  The difference between our two blanks is mine
had a curve in it to f5, and yours may be flat.  From what others have said, the rough 
grinding will break down the glazing if you're starting out flat anyway... so you can 
probably put them on right-side-up.

Shane LaPierre
SLAPIERR@bcbsct.com

>>> Brian Yankee <byankee@fas.harvard.edu> 01/12/99 03:23pm >>>

First, has anyone used glazed tiles, but glued them onto the tool upside
down so that the unglazed side is up? Is there any point to doing this?