Re: [ATM] Walnut particles.

["Bob May" <rmay@nethere.com>]

Mix the cheap carpender's glue with about as much water and a few
drops of dishwashing detergent (depending upon how much you mix
up!)  and wet the whole tube down before brushing on the glue and
quickly put the walnut shell stuff in the tube and roll well.
Then pat it all down a bitwithout brushing and wait.  Working
time is on the order of about 5 minutes or so so you want ot be
quick about it.
After, spray paint thick and when done with that, brush the
entire surface a bit and spray another finish coat on thinly.
Walnut shells are better than nothing but not that great as they
will tend to have a lot of flat areas which will reflect the
light down the tube.  Best is to do bafflesas the Newt program
shows and calculates.
Bob May
Due to the large volume of SPAM thaat I'm getting, add an open
square bracket to the subject line or my spam filter will reject
your post~
rmay at nethere.com
http: slash /nav.to slash bobmay
http: slash /bobmay dot astronomy.net
Replace the obvious words with the proper character.

_______________________________________________
ATM mailing list http://www.atmlist.net/