Re: [ATM] Polishing staining

[Mike Lockwood <melockwo@uiuc.edu>]

Gary,

GARY FUCHS wrote:
> Is there anything wrong with using a very dilute amount of liquid
> dish soap, and the rest as you describe? I stand the mirror up to
> dry and don't get spots but our water probably is on the hard side
> - but without particles or sediment as far as I can tell.

It certainly won't hurt the mirror, but I am not sure if it would
dissolve the residue or not.  Using a sprayer on the faucet might
help, as the force of the water might remove it.

The residue shows up much more readily on a BVC mirror.  I just
finished another large BVC mirror (using the same polish and pitch)
and it is merciless in how it shows surface defects, dust, residue,
and gunk on the surface.

	Mike Lockwood




_______________________________________________
ATM mailing list http://www.atmlist.net/