Re: [ATM] flexed mirrors

["Bill Kelley" <flex@commspeed.net>]

Charles et al,
A convex back of the same radius is very close to the ideal back shape.
A flat back gives results better than necessary for moderate size mirrors of 
moderate speed.
Bill

----- Original Message ----- 
From: "Charles Mitchard" <charlesmitchard@iinet.net.au>
To: <atm@atmlist.net>
Sent: Wednesday, January 16, 2008 9:12 PM
Subject: [ATM] flexed mirrors


> Does a curved back mirror require a corresponding curve on the face of
> the puller plate that is bonded to the foam?
> Seems as if it should to fit correctly.
> Charles
>
> -- 
> www.members.iinet.net.au/~charlesmitchard/index.html
>
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 

_______________________________________________
ATM mailing list http://www.atmlist.net/