Amateur Telescope Makers (ATM) Archive for JAN08 - by author

• Thread Index

• Re: [ATM] Amateur Asteroid detection
  • From: Adam Krause <krausea34@yahoo.com>
• Re: [ATM] Bargain Meade ETX-60 'goto'
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Secondary Offset
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Secondary Offset
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Secondary Offset
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Secondary Offset
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Secondary Offset
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Secondary Offset
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Transverse Error
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Transverse Error
  • From: Alexis Cousein <al@sgi.com>
• [ATM] Transverse Error
  • From: "Anthony Anconetani" <anthony.anconetani.atm@gmail.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• Re: [ATM] Mirror silvering
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• Re: [ATM] Mirror silvering
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• Re: [ATM] Crazy simple mirror cell idea
  • From: ArtfulBodger <artfulbodger@earthlink.net>
• Re: [ATM] Crazy simple mirror cell idea
  • From: ArtfulBodger <artfulbodger@earthlink.net>
• Re: [ATM] Crazy simple mirror cell idea
  • From: ArtfulBodger <artfulbodger@earthlink.net>
• Re: [ATM] Microwave heating of glass
  • From: "Ashley Roll" <ash@digitalnemesis.com>
• Re: [ATM] PC board weather proofing.
  • From: "Ashley Roll" <ash@digitalnemesis.com>
• Re: [ATM] Microwave heating of glass - PYREX
  • From: "astroguy@nas.com" <astroguy@nas.com>
• Re: [ATM] Flexed mirrors
  • From: "astroguy@nas.com" <astroguy@nas.com>
• [ATM] Amateur Asteroid detection
  • From: "ATM_Wes" <atm_wes@sbcglobal.net>
• [ATM] R.E.Brandt telescopes
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] Flexed mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Flexed mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Flexed mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] resurfacing a glued & flexed mirror?`
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] resurfacing a glued & flexed mirror?`
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] flexed mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Silvering Mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Silvering Mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Silvering Mirrors
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] Subdiameter lap simulator
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• [ATM] Subdiameter lap simulator - updated
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• Re: [ATM] Subdiameter lap simulator - updated
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• Re: [ATM] grinding and polishing machine
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] grinding and polishing machine
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] grinding and polishing machine
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Is this a good deal?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Bargain Meade ETX-60 'goto'
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Bargain Meade ETX-60 'goto'
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] grinding and polishing machine
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Building a 6" f/5, would like some input
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grit for 10" Quartz Blank - 3 questions
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grit for 10" Quartz Blank - 3 questions
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Microwave heating of glass
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] processing techniques for soft optical glass?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grit for 10" Quartz Blank - 3 questions
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Microwaves and craziness
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Material for Tool
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] mirror pinching
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Ritchey Chretien
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Material for Tool
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Ritchey Chretien
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Material for Tool
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Flexed mirrors
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Flexed mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Flexed mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Figuring help for Lutfu
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Polishing staining
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Polishing staining
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] PC board weather proofing.
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] True Confession
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians, fused quartz
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians, fused quartz
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Bevel question
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Mirror Silvering
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Started Hogging
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ritchey cretians
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Bevel question
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Mirror Silvering
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Mirror silvering
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Polishing staining
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] soldering aluminum
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] soldering aluminum
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Started Hogging
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Bevel question
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Curious
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Walnut particles.
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] []Hogging 10"F5 Plate glass
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] conic constant
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] RC primary-secondary separation.
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] draper machine
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Secondary Offset
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Started Hogging
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Sky Six Serial Protocol
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Sky Six Serial Protocol
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] reworking 12 inch
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] PC board weather proofing.
  • From: Charles Broward <broward32666@yahoo.com>
• [ATM] Flex under vista
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] flexed mirrors
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] soldering aluminum
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] Silvering Mirrors
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] Mirror Silvering
  • From: Che Ers <yaar92@yahoo.com>
• [ATM] Mirror Silvering
  • From: Che Ers <yaar92@yahoo.com>
• [ATM] Mirror Silvering
  • From: Che Ers <yaar92@yahoo.com>
• [ATM] Astigmatism
  • From: Che Ers <yaar92@yahoo.com>
• [ATM] Small flexed telescope
  • From: Christian Maciel <jeeperbr@yahoo.com.br>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Chris Todd" <christopher.todd@gmail.com>
• Re: [ATM] Flexed mirrors
  • From: "Christopher Todd" <christopher.todd@gmail.com>
• Re: [ATM] Is this a good deal?
  • From: "Corona Australis" <corona_australis@westnet.com.au>
• [ATM] Wire Spiders
  • From: CRayMUSEUM@aol.com
• Re: [ATM] Microwave heating of glass
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Microwave heating of glass
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Hill or hole?
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Is this a good deal?
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] Is this a good deal?
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] Is this a good deal?
  • From: Dave and Connie <dmatt@frontiernet.net>
• [ATM] Grit for 10" Quartz Blank - 3 questions
  • From: Dave and Connie <dmatt@frontiernet.net>
• [ATM] Material for Tool
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] Material for Tool
  • From: Dave and Connie <dmatt@frontiernet.net>
• [ATM] Bevel question
  • From: Dave and Connie <dmatt@frontiernet.net>
• [ATM] Started Hogging
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] Started Hogging
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] Flexed mirrors
  • From: Dave Grandeffo <davegran@ticon.net>
• Re: [ATM] beginner's questions
  • From: "Dave McCarter" <dmccarter@sympatico.ca>
• Re: [ATM] grinding and polishing machine
  • From: "Dave McCarter" <dmccarter@sympatico.ca>
• [ATM] practical limits of 1 inch mirror
  • From: David Adams <elrey314159265359@yahoo.com>
• [ATM] Hill or hole?
  • From: "David Bevel" <dhcb@bellsouth.net>
• Re: [ATM] The Sky Six Serial Protocol
  • From: "David B. Toth" <ve3gyq@amsat.org>
• [ATM] practical limits of 1 inch mirror
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] R.E.Brandt telescopes
  • From: David Weinshenker <daze39@earthlink.net>
• [ATM] processing techniques for soft optical glass?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Microwave heating of glass
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Microwave heating of glass
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Microwave heating of glass
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Crazy simple mirror cell idea
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Flexed mirrors
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] The Flexed mirror
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] ritchey cretians
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] ritchey cretians
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Mirror Silvering
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Mirror silvering
  • From: David Weinshenker <daze39@earthlink.net>
• [ATM] computer control of machine polishing? \ Re: Ritchey-Chrétien
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Silvering telescope mirror's
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] first light on a Lurie-Houghton
  • From: David Weinshenker <daze39@earthlink.net>
• [ATM] testing convex surfaces by reflection - a thought experiment
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] practical limits of 1 inch mirror
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Microwave heating of glass
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwave heating of glass
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Newport Glass pre generated blank
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwave heating of glass
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwave heating of glass
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwave heating of glass
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwave heating of glass
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwaves and craziness
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwaves and craziness
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwaves and craziness
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Microwaves and craziness
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Flexed mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Flexed mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] The Flexed mirror
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Polishing staining
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Good stuff
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] PC board weather proofing.
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Polishing staining
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Mirror silvering
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Silvering telescope mirror's
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Silvering Mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Silvering Mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Silvering Mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Silvering Mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] International Space Station
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Bargain Meade ETX-60 'goto'
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] ATM Archive at astro.umsystem.edu is unavailable
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] Curious
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] soldering aluminum
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] ritchey cretians
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Newport Glass pre generated blank
  • From: Don R Surles <Don.R.Surles-1@usa.dupont.com>
• [ATM] Polishing staining
  • From: "Douglas Arion" <darion@carthage.edu>
• Re: [ATM] Is this a good deal?
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] practical limits of 1 inch mirror
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Grit for 10" Quartz Blank - 3 questions
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Benjamin Pikes Son's New York
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Benjamin Pikes Son's New York
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Benjamin Pikes Son's New York
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] Newport Glass pre generated blank
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Newport Glass pre generated blank
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Newport Glass pre generated blank
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Newport Glass pre generated blank
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Material for Tool
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Material for Tool
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Ritchey Chretien
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Microwaves and craziness
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] ritchey cretians
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] ritchey cretians
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Curious
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] New Videos on How to Make a Dental Stone Tool on YouTube
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Microwave heating of glass
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Polishing staining
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Silvering telescope mirror's
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Silvering telescope mirror's
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Hill or hole?
  • From: GARY FUCHS <gary@rcn.com>
• [ATM] 20" F4.5 Done
  • From: "Geogre Nikolidakis" <geoniko@otenet.gr>
• Re: [ATM] 20" F4.5 Done
  • From: "Geogre Nikolidakis" <geoniko@otenet.gr>
• Re: [ATM] ritchey cretians
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] Bargain Meade ETX-60 'goto'
  • From: G Gagne <gagne51@clearwire.net>
• Re: [ATM] Flexed Mirrors
  • From: G Gagne <gagne51@clearwire.net>
• [ATM] The Sky Six Serial Protocol
  • From: G Gagne <gagne51@clearwire.net>
• Re: [ATM] The Sky Six Serial Protocol
  • From: G Gagne <gagne51@clearwire.net>
• Re: [ATM] Flexed mirrors
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] Mirror silvering
  • From: "Gord Tulloch" <gord.tulloch@gmail.com>
• [ATM] Removing a chrome (?) coating layer - THE END
  • From: Guntram Lampert <glampert@aon.at>
• [ATM] Removing a chrome (?) coating layer - THE END
  • From: Guntram Lampert <glampert@aon.at>
• Re: [ATM] Microwaves and craziness
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Flexed mirrors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] resurfacing a glued & flexed mirror?`
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Mirror silvering
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Mirror silvering
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Something Different in Mirrors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Null test for convex surface in OSLO
  • From: Guy Wauters <Guy.Wauters@UGent.be>
• [ATM] Ray Trace Programm
  • From: halbertmusik@aol.com
• [ATM] Walnut particles.
  • From: halbertmusik@aol.com
• [ATM] Schief design
  • From: halbertmusik@aol.com
• [ATM] Second try with Schief designs
  • From: halbertmusik@aol.com
• [ATM] Betr.: Wire Spiders
  • From: "Harro Treur" <Harro.Treur@waternet.nl>
• [ATM] Betr.: The 1100 mm (43.3") f/4 telescope - Progress report
  • From: "Harro Treur" <Harro.Treur@waternet.nl>
• Re: [ATM] PC board weather proofing.
  • From: hermit <hermit@outofoptions.org>
• [ATM] telescope design
  • From: horace r davis <hrd9@juno.com>
• Re: [ATM] Polishing staining
  • From: Hugues.Laroche@ses-engineering.com
• Re: [ATM] Mirror silvering
  • From: "Ian McKernan" <I.Mckernan@murdoch.edu.au>
• [ATM] Microwave heating of glass
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] Microwave heating of glass
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] ATM Digest, Vol 49, Issue 11
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] Microwave heating of glass
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] Microwave heating of glass
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] Microwaves and craziness
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] Microwaves and craziness
  • From: Ian Williams <i.r.williams@bristol.ac.uk>
• Re: [ATM] Microwave heating of glass
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] Microwaves and craziness
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] beginner's questions
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Newport Glass pre generated blank
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Ritchey Chretien
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Mirror Silvering
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Mirror silvering
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Silvering Mirrors
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] Building a 6" f/5, would like some input
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] Source for Cassegrain secondary blank?
  • From: "Jeff Bottman" <jeff.bottman@gmail.com>
• Re: [ATM] Material for Tool
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Material for Tool
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Material for Tool
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] Flexed Mirrors
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Subdiameter lap simulator - updated
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Subdiameter lap simulator - updated
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Benjamin Pikes Son's New York
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Benjamin Pike's Sons New York
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Newport Glass pre generated blank
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Source for Cassegrain secondary blank?
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Figuring help for Lutfu
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring help for Lutfu
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring help for Lutfu
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] ritchey cretians
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Ritchey-Chrétien
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] International Space Station
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] soldering aluminum
  • From: Jerry Hillman <truckeratm@sbcglobal.net>
• [ATM] soldering vs MIG-TIG welding
  • From: Jerry Hillman <truckeratm@sbcglobal.net>
• Re: [ATM] Crazy simple mirror cell idea
  • From: J H M van Gastel <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Ritchey Chretien
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Figuring help for Lutfu
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] ritchey cretians
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Ritchey-Chrétien
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] conic constant
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] RC primary-secondary separation.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Transverse Error
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] testing convex surfaces by reflection - a thought experiment
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Material for Tool
  • From: Jim McPherson <jim@eflightproducts.com>
• [ATM] Building a 6" f/5, would like some input
  • From: "JM O'Neill" <hanabi@cox.net>
• [ATM] conic constant
  • From: "John K. LaShell" <grace.community@rcn.com>
• Re: [ATM] conic constant
  • From: "John K. LaShell" <grace.community@rcn.com>
• Re: [ATM] Is this a good deal?
  • From: John Levreault <jlevro@comcast.net>
• Re: [ATM] soldering aluminum
  • From: John Levreault <jlevro@comcast.net>
• [ATM] Good stuff
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] it's finished
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians, fused quartz
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians, fused quartz
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] Mirror Silvering
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] 48" ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] Ritchey-Chrétien
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] Ritchey-Chrétien
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] ritchey cretians
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] []Hogging 10"F5 Plate glass
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] []Hogging 10"F5 Plate glass
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] The 1100 mm (43.3") f/4 telescope - Progress report
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] Astigmatism
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] Microwave heating of glass
  • From: KR <kmreid1@shaw.ca>
• Re: [ATM] Microwave heating of glass
  • From: KR <kmreid1@shaw.ca>
• Re: [ATM] R.E.Brandt telescopes
  • From: "kreig" <astroguy@nas.com>
• Re: [ATM] Microwaves and craziness
  • From: "kreig" <astroguy@nas.com>
• Re: [ATM] ritchey cretians, fused quartz
  • From: "kreig" <astroguy@nas.com>
• Re: [ATM] soldering aluminum - welding equipment
  • From: "kreig" <astroguy@nas.com>
• Re: [ATM] Grit for 10" Quartz Blank - 3 questions
  • From: ks1u <ks1u@prodigy.net>
• Re: [ATM] Walnut particles.
  • From: ks1u <ks1u@prodigy.net>
• Re: [ATM] Silvering telescope mirror's
  • From: lance clarke <alaskawolfjoe@hotmail.com>
• [ATM] PC board weather proofing.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] PC board weather proofing.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] ritchey cretians
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Machine Grinding and polishing
  • From: <lenses@adelphia.net>
• Re: [ATM] Ray Trace Programm
  • From: <lenses@adelphia.net>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Figuring help for Lutfu
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] Good stuff
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• [ATM] it's finished
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• Re: [ATM] it's finished
  • From: "lütfü" "çakmak" <lutfu_cakmak@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] Flexed mirrors
  • From: "Marinus van der Lugt" <lugt@xs4all.nl>
• Re: [ATM] Silvering Mirrors
  • From: "Marinus van der Lugt" <lugt@xs4all.nl>
• Re: [ATM] processing techniques for soft optical glass?
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] beginner's questions
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] practical limits of 1 inch mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Microwave heating of glass
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Material for Tool
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] mirror pinching
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Wire Spiders
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Building a 6" f/5, would like some input
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] soldering aluminum
  • From: "Michael Byorick" <mbyorick@aznex.net>
• Re: [ATM] grinding and polishing machine
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Microwave heating of glass
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] The Sky Six Serial Protocol
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] The Sky Six Serial Protocol
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Curious
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Hill or hole?
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Curious
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Amateur Asteroid detection
  • From: Michael Sallman <msallman@pro-ns.net>
• [ATM] Crazy simple mirror cell idea
  • From: Mike Carambat <mcaramb@rocketmail.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: Mike Carambat <mcaramb@rocketmail.com>
• [ATM] Enhanced coatings
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] whale song
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Microwave heating of glass
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Wire Spiders
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Ritchey Chretien
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Figuring help for Lutfu
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Polishing staining
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Polishing staining
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Transverse Error
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Secondary Offset
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Transverse Error
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Transverse Error
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Flex under vista
  • From: "Mike Warne" <mike.warne@gmail.com>
• Re: [ATM] soldering aluminum
  • From: "Mike Warne" <mike.warne@gmail.com>
• Re: [ATM] Walnut particles.
  • From: "Mike Warne" <mike.warne@gmail.com>
• [ATM] mirror pinching
  • From: Mircea Pteancu <mirceapte@yahoo.com>
• [ATM] []Hogging 10"F5 Plate glass
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] Something Different in Mirrors
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] 20" F4.5 Done
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] 20" F4.5 Done
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] practical limits of 1 inch mirror
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] beginner's questions
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Testing Techniques
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Testing Techniques
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] beginner's questions
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Enhanced coatings
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Newport Glass pre generated blank
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] mirror pinching
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Figuring help for Lutfu
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Flexed mirrors
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] The Flexed mirror
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Bevel question
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] ritchey cretians
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] ritchey cretians
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] ritchey cretians
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Started Hogging
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• [ATM] Secondary Offset
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Secondary Offset
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Secondary Offset
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Secondary Offset
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Astigmatism
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] 20" F4.5 Done
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• [ATM] Curious
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] Curious
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] Curious
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] Curious
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Ritchey-Chrétien
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Mirror silvering
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Started Hogging
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] practical limits of 1 inch mirror
  • From: "Olivier Biot" <olivier.biot@gmail.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Olivier Biot" <olivier.biot@gmail.com>
• Re: [ATM] soldering aluminum
  • From: "Pat Bunn" <pbunn@patbunn.com>
• [ATM] reworking 12 inch
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• [ATM] reworking 12 inch
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• Re: [ATM] resurfacing a glued & flexed mirror?`
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Subdiameter lap simulator - updated
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Microwaves and craziness
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ritchey cretians
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] soldering aluminum
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] soldering aluminum
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Something Different in Mirrors
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Flexed mirrors
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Cemented Petzval
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Something Different in Mirrors
  • From: "Richard Schwartz" <richard1941@gmail.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• [ATM] The 1100 mm (43.3") f/4 telescope - Progress report
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Is this a good deal?
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] reworking 12 inch
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• Re: [ATM] Wire Spiders
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] The Flexed mirror
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Machine Grinding and polishing
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Silvering telescope mirror's
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Grinding Machine for mirrors
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Silvering Mirrors
  • From: Russell Jocoy <russjocoy@hotmail.com>
• Re: [ATM] Bevel question
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] Polishing staining
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] grinding and polishing machine
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] grinding and polishing machine
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] grinding and polishing machine
  • From: shyam rathod <iloveyawli@yahoo.com>
• [ATM] draper machine
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] Ritchey-Chrétien
  • From: Stan Truitt <s.truitt@hawaiiantel.net>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Crazy simple mirror cell idea
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Secondary Offset
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Flexed mirrors
  • From: "Steve" <gsv987@mailshack.com>
• Re: [ATM] Flexed mirrors
  • From: "Steve" <gsv987@mailshack.com>
• Re: [ATM] Material for Tool
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Material for Tool
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] practical limits of 1 inch mirror
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Not tde or tue, important oblate spheroid, ellipsoid
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Microwave heating of glass
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Microwave heating of glass
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Microwaves and craziness
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Microwaves and craziness
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Microwaves and craziness
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Microwaves and craziness
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Flexed mirrors
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] resurfacing a glued & flexed mirror?`
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Grinding Machine for mirrors
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Mirror silvering
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Silvering Mirrors
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] International Space Station
  • From: Vikram Chhatre <crypticlineage@gmail.com>
• Re: [ATM] Ritchey-Chrétien
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Ritchey-Chrétien
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] Fw: Mirror Silvering
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Grinding Machine for mirrors
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] ATT
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] International Space Station
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Mirror Silvering
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Mirror Silvering
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Mirror Silvering
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Mirror silvering
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Secondary Offset
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Secondary Offset
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Secondary Offset
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] first light on a Lurie-Houghton
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] International Space Station
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] ritchey cretians
  • From: William Marriott <bmarriott@pacbell.net>
• re: Ritchey-Chrétien
  • From: William Marriott <bmarriott@pacbell.net>