Re: [ATM] Pitch Source / Edge-stacked Tile Tool

[IAPDK@ADMIN.DRAKE.EDU]

I don't have a picture of my own yet.  There is a good one on the Yahoo
Mirror-O-Matic group at:
http://tech.ph.groups.yahoo.com/group/Mirror-O-Matic/photos/view/45b5?b=1
but you have to join the group to see it.

Start by standing tiles against the form making a circle.  Then stand
another circle against those.  Repeat until the form is filled.  If you
tape the tiles in strips they won't fall over.  Lay ten tiles flat in
a row with about 1/8" between them, glazed side up.  Use a straight edge
against one side to align them and apply a strip of tape.  I used 
sheetrock joint tape cut into one-inch wide strips, but masking tape
would probably work.

There is a pic of an different edge-stacked tool at:
http://www.mtburr.com/binoscopes/tiletool.htm

Paul K
_______________________________________________
ATM mailing list http://www.atmlist.net/