Amateur Telescope Makers (ATM) Archive for JAN07 - by author

• Thread Index

• Re: [ATM] Secondary questions
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] A historic glass pusher
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] roller bearing vs Slider bearings
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Valve needed - what's it called?
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] infra-red
  • From: "ATM_jcbj" <atm_jcbj@bellsouth.net>
• Re: [ATM] slurry pump
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] CCD Slit Test & 24" M-o-M
  • From: Bill Thomas <bthomas32000@yahoo.com>
• Re: [ATM] linux for astronomy
  • From: "Bobby Heid" <bheid@sc.rr.com>
• [ATM] custom secondary holder - referral pls
  • From: "Bob Drew" <gofast3@hotmail.com>
• [ATM] custom secondary holder - referral pls
  • From: "Bob Drew" <gofast3@hotmail.com>
• [ATM] Fan locations & function for a 32
  • From: "Bob Drew" <gofast3@hotmail.com>
• Re: [ATM] Trepanning followup
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Solar Filtering
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• [ATM] Sheet polarizer
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] Trepanning...you know for kids!
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Aluminum mirror?
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Trepanning...you know for kids!
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Fwd: Re: [capitalastronomers] Linux and Controlling Telescopes
  • From: DL Sharp <dls@dohickey.net>
• Re: [ATM] Ellison, The Amateur's Telescope
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] sheet polarizer
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Measuring scattered light off optical surfaces
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Measuring scattered light off optical surfaces
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A historic glass pusher
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] infra-red
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] historic glass pusher 'With'
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Rotating the OTA
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] flex rocker azimuth stickiness
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] flex rocker azimuth stickiness
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] roller bearing vs Slider bearings
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] roller bearing vs Slider bearings
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Measuring scattered light off optical surfaces
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Measuring scattered light off optical surfaces
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] roller bearing vs Slider bearings
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] slurry pump
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] slurry pump
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] slurry pump
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Fan locations & function for a 32
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Fan locations & function for a 32
  • From: "Dr. Wm. D. Hanagan, Jr." <hanaganl@comcast.net>
• [ATM] 8" f/3.5 !
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] A historic glass pusher
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Mirror-o-matic
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] A historic glass pusher
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] historic glass pusher 'With'
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Dick Parker's mirror workshop
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Aluminum mirror?
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] roller bearing vs Slider bearings
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] roller bearing vs Slider bearings
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Rotating the OTA
  • From: Gilbert Gagne <ggagne@clearwire.net>
• [ATM] 5" blank needed
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] Machine work - should I use adjustable hand reamer?
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] Help with locating picture source
  • From: Glen Youman <gyouman@sbcglobal.net>
• Re: [ATM] sheet polarizer
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] building a refracting telescope - willmann-bell
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Hogging!!!
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Fwd: Re: [capitalastronomers] Linux and Controlling Telescopes
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] historic glass pusher 'With'
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Active Optic Guiding
  • From: Guy Wauters <Guy.Wauters@UGent.be>
• [ATM] Betr.: Rotating the OTA
  • From: "Harro Treur" <Harro.Treur@waternet.nl>
• Re: [ATM] sheet polarizer
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] infra-red
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] belt sander
  • From: hermit <hermit@outofoptions.org>
• [ATM] 16 1/2" mirror grinding-NEED HELP
  • From: horace r davis <hrd9@juno.com>
• [ATM] size of tile
  • From: horace r davis <hrd9@juno.com>
• [ATM] TILE TOOL
  • From: horace r davis <hrd9@juno.com>
• [ATM] Question on hogging
  • From: horace r davis <hrd9@juno.com>
• [ATM] linux for astronomy
  • From: horace r davis <hrd9@juno.com>
• [ATM] belt sander
  • From: horace r davis <hrd9@juno.com>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: Hugues.Laroche@ses-astra.com
• [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Valve needed - what's it called?
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Ellison, The Amateur's Telescope
  • From: "Jack Swaton @ Starry Host" <jswaton@starryhost.com>
• Re: [ATM] Ellison, The Amateur's Telescope
  • From: "Jack Swaton @ Starry Host" <jswaton@starryhost.com>
• Re: [ATM] Rotating the OTA
  • From: "Jack Swaton @ Starry Host" <jswaton@starryhost.com>
• Re: [ATM] Help with locating picture source
  • From: "Jack Swaton @ Starry Host" <jswaton@starryhost.com>
• Re: [ATM] roller bearing vs Slider bearings
  • From: Jan Bentz <jbentz@inreach.com>
• [ATM] SW: GuideDog to PEAS
  • From: "Jan Grecner" <jan.grecner@telecom.cz>
• Re: [ATM] 16 1/2" mirror grinding-NEED HELP
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] Fw: Re: 16 1/2" mirror grinding-NEED HELP
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] 16 mirror
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] Tile size?
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] TILE TOOL
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] infra-red
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] flex rocker azimuth stickiness
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• Re: [ATM] the effects of scratches...+
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] Lap options for 14.7" F/4.5
  • From: Jim McPherson <jim@eflightproducts.com>
• Re: [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: Jim McPherson <jim@eflightproducts.com>
• Re: [ATM] 16 1/2" mirror grinding-NEED HELP
  • From: Jim McPherson <jim@eflightproducts.com>
• Re: [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• Re: [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: "John and Bernadine Murray" <onslow@cyberone.com.au>
• [ATM] slurry pump
  • From: "John K. LaShell" <grace.community@rcn.com>
• [ATM] Help with locating picture source
  • From: John Lynch <john_lynch2007@yahoo.com>
• Re: [ATM] Measuring scattered light off optical surfaces
  • From: "John Sherman" <atmer@johnspics.com>
• [ATM] infra-red
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] infra-red
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] infra-red
  • From: John Sherman <atmer@johnspics.com>
• Re: [ATM] infra-red
  • From: "John Sherman" <atmer@johnspics.com>
• [ATM] new folded mirror lens
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] Aluminum mirror?
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] Aluminum mirrors
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] slurry pump
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] Slurry pump, more details
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] slurry pump
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] slurry pump
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] Grit dispenser
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] Rotating the OTA
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] sheet polarizer
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Trepanning followup
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] slurry pump
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Hogging!!!
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Valve needed - what's it called?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Question on hogging
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Hogging!!!
  • From: "KR" <kreid@primus.ca>
• [ATM] Rotating the OTA
  • From: "Larry Kruzan" <larry_kruzan@insightbb.com>
• [ATM] Rotating the OTA
  • From: "Larry Kruzan" <larry_kruzan@insightbb.com>
• Re: [ATM] Rotating the OTA
  • From: "Larry Kruzan" <larry_kruzan@insightbb.com>
• [ATM] Secondary questions
  • From: "Larry Kruzan" <larry_kruzan@insightbb.com>
• Re: [ATM] 5" blank needed
  • From: <lenses@adelphia.net>
• Re: [ATM] slurry pump
  • From: <lenses@adelphia.net>
• Re: [ATM] slurry pump
  • From: <lenses@adelphia.net>
• Re: [ATM] Slurry pump, more details
  • From: <lenses@adelphia.net>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] Lap options for 14.7" F/4.5
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Inexpensive device controllers from National Instruments
  • From: MarkSKowalski@comcast.net
• Re: [ATM] Ellison's book
  • From: Matt Considine <matt@considine.net>
• Re: [ATM] Rotating the OTA
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Rotating the OTA
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] A historic glass pusher
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Fwd: Re: [capitalastronomers] Linux and Controlling Telescopes
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] historic glass pusher 'With'
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Rotating the OTA
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Rotating the OTA
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] slurry pump
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] slurry pump
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Valve needed - what's it called?
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] infra-red
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] linux for astronomy
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Inexpensive device controllers from National Instruments
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Articles Gone
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] sheet polarizer
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fan locations & function for a 32
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] figure stroke for 70% zone
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Trepanning...you know for kids!
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Mirror-o-matic
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Question on hogging
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Question on hogging
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] infra-red
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] Trepanning followup
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] Trepanning followup
  • From: "Norm Prince" <norman.prince@verizon.net>
• [ATM] Trepanning...you know for kids!
  • From: "Norm Prince" <norman.prince@verizon.net>
• [ATM] Of no import
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] slurry pump
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] Pitch Source / Edge-stacked Tile Tool
  • From: "Norm Prince" <norman.prince@verizon.net>
• [ATM] Hogging!!!
  • From: "Norm Prince" <norman.prince@verizon.net>
• [ATM] the effects of scratches...+
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] cutting plate glass
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] cutting plate glass
  • From: "Peter" <peter@kitgear.com>
• [ATM] Ellison, The Amateur's Telescope
  • From: Peter Abrahams <telscope@europa.com>
• [ATM] historic glass pusher 'With'
  • From: Peter Abrahams <telscope@europa.com>
• [ATM] thermal issues
  • From: Peter Abrahams <telscope@europa.com>
• Re: [ATM] Ellison's book
  • From: "Philip Lardner" <philiplardner@eircom.net>
• [ATM] Solar Filtering
  • From: "RC Stargazer" <david@tabor.com>
• Re: [ATM] CCD Slit Test & 24" M-o-M
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Finder
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] roller bearing vs Slider bearings
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] slurry pump
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] 8" f/3.5 !
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] slurry pump
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Machine work - should I use adjustable hand reamer?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Dual-Use Refractor
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] historic glass pusher 'With'
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Fan locations & function for a 32
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] YAG (Yet Another Geometry;-)
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] YAG (Yet Another Geometry;-)
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] belt sander
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Dual-Use Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Dual-Use Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] YAG (Yet Another Geometry;-)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] YAG (Yet Another Geometry;-)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Articles Gone
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Ellison, The Amateur's Telescope
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Articles Gone
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Articles Gone - correction
  • From: Ric Rokosz <radicell2@yahoo.com>
• [ATM] A new 110 cm (43.3") telescope project
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Slurry pump, more details
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] flex rocker azimuth stickiness
  • From: "Rod Brackenridge" <rjbr@gawab.com>
• Re: [ATM] Machine work - should I use adjustable hand reamer?
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] Re; Help with my collimation
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] Your grinder, your rounder, etc.
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Historic Glass pusher
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Scattered thoughts
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] slurry pump
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] Started a mirror w/ my 8 year old son
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• [ATM] sofware?
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] sofware?
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] 8" f/3.5 !
  • From: Steve Beccue <lsteve@beccue.com>
• Re: [ATM] infra-red
  • From: Steve Beccue <lsteve@beccue.com>
• [ATM] Valve needed - what's it called?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Valve needed - what's it called?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Valve needed - what's it called?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Grit dispenser
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Rotating the OTA
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Trepanning followup
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] 8" f/3.5 !
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Rotating the OTA
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• Re: [ATM] Rotating the OTA
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• [ATM] figure stroke for 70% zone
  • From: Tom Fredrickson <newsforfred@comcast.net>
• Re: [ATM] figure stroke for 70% zone
  • From: Tom Fredrickson <newsforfred@comcast.net>
• Re: [ATM] Corot lifts off
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• [ATM] Measuring scattered light off optical surfaces
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• [ATM] (no subject)
  • From: <towens@shibumi-consulting.net>
• Re: [ATM] Aluminum mirror?
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] aurora exploration
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Machine work - should I use adjustable hand reamer?
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Valve needed - what's it called?
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] infra-red
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] More on Houghton corrector
  • From: "vladimir sacek" <vla@toast.net>
• [ATM] More on Houghton corrector
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] 8" f/3.5 !
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] sheet polarizer
  • From: "Wayne Churchill" <wchurchill2nh@hotmail.com>
• Re: [ATM] sheet polarizer
  • From: "Wayne Churchill" <wchurchill2nh@hotmail.com>
• Re: [ATM] Ellison, The Amateur's Telescope
  • From: "Wayne Churchill" <wchurchill2nh@hotmail.com>
• Re: [ATM] sheet polarizer
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] sheet polarizer
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] A new 110 cm (43.3") telescope project
  • From: William Marriott <bmarriott@pacbell.net>