Amateur Telescope Makers (ATM) Archive for JAN06 - by thread

• Author Index

• [ATM] 12 inch/f5,4 Travel- Dobson, ulli vedder
  • <Possible follow-up(s)>
  • [ATM] 12 inch/f5,4 Travel- Dobson, ulli vedder
• [ATM] bending square tubing (was: 12 inch/f5,4 Travel- Dobson), ulli vedder
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, vorblesnak
  • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Dale Eason
  • <Possible follow-up(s)>
  • [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, vorblesnak
  • [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, vorblesnak
  • [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, vorblesnak
    • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Vladimir Galogaza
    • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Mike Lockwood
      • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Daniel Fundo
    • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Dale Eason
• [ATM] (no subject), Mark
  • Re: [ATM] (no subject), Jeff Baldwin
  • <Possible follow-up(s)>
  • [ATM] (no subject), Robert Fifarek
• [ATM] 10" scope and NASA, Vladimir Galogaza
  • Re: [ATM] 10" scope and NASA, Michael Peck
• [ATM] 11.2" slumped blank and tool base for sale, Robert OToole
• Re: [ATM] 12 inch/f5,4 Travel- Dobson, NGC704
  • Re: [ATM] 12 inch/f5,4 Travel- Dobson, Mark Holm
  • <Possible follow-up(s)>
  • Re: [ATM] 12 inch/f5,4 Travel- Dobson, John Sherman
    • Re: [ATM] 12 inch/f5,4 Travel- Dobson, Mike Lockwood
• [ATM] 15.5 Ultrathin project, vorblesnak
  • <Possible follow-up(s)>
  • Re: [ATM] 15.5 Ultrathin project, John Sherman
• [ATM] 16" mirror in 1" thick glass for Newbie, Mark
  • Re: [ATM] 16" mirror in 1" thick glass for Newbie, Mel Bartels
  • Re: [ATM] 16" mirror in 1" thick glass for Newbie, Mark Holm
    • Re: [ATM] 16" mirror in 1" thick glass for Newbie, Tom Moulton
      • Re: [ATM] 16" mirror in 1" thick glass for Newbie, Mark
  • Re: [ATM] 16" mirror in 1" thick glass for Newbie, Mark
    • Re: [ATM] 16" mirror in 1" thick glass for Newbie, Vladimir Galogaza
  • <Possible follow-up(s)>
  • Re: [ATM] 16" mirror in 1" thick glass for Newbie, The Alarm Co.
• [ATM] 16" RCC primary, =?Windows-1250?Q?Attila_Schn=E9?=
  • Re: [ATM] 16" RCC primary, Richard
    • Re: [ATM] 16" RCC primary, Dream - Telescopes & Accessories, Inc.
  • Re: [ATM] 16" RCC primary, Ric Rokosz
  • Re: [ATM] 16" RCC primary, Jim Burrows
  • Re: [ATM] 16" RCC primary, vladimir
    • Re: [ATM] 16" RCC primary, Jeff Rowe
      • Re: [ATM] 16" RCC primary, vladimir
  • <Possible follow-up(s)>
  • [ATM] 16" RCC primary, =?Windows-1250?Q?Attila_Schn=E9?=
    • Re: [ATM] 16" RCC primary, Ric Rokosz
    • Re: [ATM] 16" RCC primary, Jim Burrows
• [ATM] 16"RCC mirror, =?Windows-1250?Q?Attila_Schn=E9?=
  • Re: [ATM] 16"RCC mirror, Ric Rokosz
    • Re: [ATM] 16"RCC mirror, Attila Schné
      • Re: [ATM] 16"RCC mirror, Ric Rokosz
• [ATM] A Successful Experiment, vorblesnak
• [ATM] Acculap problems...., Douglas Arion
  • Re: [ATM] Acculap problems...., Mel Bartels
  • Re: [ATM] Acculap problems...., John Lynch
  • <Possible follow-up(s)>
  • Re: [ATM] Acculap problems...., Mel Bartels
    • [ATM] Polishing speed, Mike Lockwood
      • Re: [ATM] Polishing speed, B. Bainbridge
      • Re: [ATM] Polishing speed, Guy Brandenburg
      • Re: [ATM] Polishing speed, Vladimir Galogaza
• Re: [ATM] Alan Adler's Flex Mirror specs, Andre Yanoviak
• [ATM] Aluminum bearing scrap discs, William Marriott
  • Re: [ATM] Aluminum bearing scrap discs, Mike Lockwood
• [ATM] APO design, =?Windows-1250?Q?Attila_Schn=E9?=
  • Re: [ATM] APO design, Richard
  • Re: [ATM] APO design, Richard F.L.R. Snashall
    • Re: [ATM] APO design, =?Windows-1250?Q?Attila_Schn=E9?=
  • <Possible follow-up(s)>
  • [ATM] APO design, =?Windows-1250?Q?Attila_Schn=E9?=
• [ATM] Astro Speak,pilfered from Kingston RASC Astro Notes newsletter, George Anderson
• Re: [ATM] ATM Digest, Vol 25, Issue 27, Arjan te Marvelde
• [ATM] Autocollimation Oil Test, Martti Koskimo
  • Message not available
    • Re: [ATM] Autocollimation Oil Test, Martti Koskimo
  • <Possible follow-up(s)>
  • Re: [ATM] Autocollimation Oil Test, Martti Koskimo
  • Re: [ATM] Autocollimation Oil Test, Arjan te Marvelde
    • Re: [ATM] Autocollimation Oil Test, Martti Koskimo
      • Re: [ATM] Autocollimation Oil Test, B. Bainbridge
      • Re: [ATM] Autocollimation Oil Test, Don Clement
      • Re: [ATM] Autocollimation Oil Test, Jeff Rowe
      • Re: [ATM] Autocollimation Oil Test, Jeff Baldwin
      • Re: [ATM] Autocollimation Oil Test, Vladimir Galogaza
  • Re: [ATM] Autocollimation Oil Test, Steven L. Dodds
• [ATM] Back to pushing glass, edwski
• [ATM] Bending square alumminum tubing for side bearings., Rappe', Mike
  • <Possible follow-up(s)>
  • Re: [ATM] Bending square alumminum tubing for side bearings., John Sherman
    • [ATM] A interferometric study of plate glass mirror edge heating, Dale Eason
      • Re: [ATM] A interferometric study of plate glass mirror edge heating, Stephen Koehler
• Re: [ATM] bending square tubing (was: 12 inch/f5,4 Travel- Dobson), Hugues.Laroche
  • Re: [ATM] bending square tubing, James P Crombie
• Re: [ATM] Carbon fiber tube, jsanchez
  • Re: [ATM] Carbon fiber tube, Richard
• [ATM] Care Package, Mahmood Hassan
• [ATM] Central hole during polishing, Balaji Ramani
  • Re: [ATM] Central hole during polishing, Mike Lockwood
    • Re: [ATM] Central hole during polishing, Balaji Ramani
• [ATM] Dense, Anthony Stillman
  • Re: [ATM] Dense, Matt Considine
  • <Possible follow-up(s)>
  • Re: [ATM] Dense, John Sherman
• [ATM] detecting TDE before polishing, jeff newsom
• [ATM] Dirty Design Trick, Richard F.L.R. Snashall
  • Re: [ATM] Dirty Design Trick, =?Windows-1250?Q?Attila_Schn=E9?=
    • Re: [ATM] Attempted Parametrization of a Petzval Design, Richard F.L.R. Snashall
      • Re: [ATM] Attempted Parametrization of a Petzval Design, Richard F.L.R. Snashall
      • Re: [ATM] Attempted Parametrization of a Petzval Design, =?Windows-1250?Q?Attila_Schn=E9?=
      • Re: [ATM] Attempted Parametrization of a Petzval Design, Richard
• [ATM] Dominic goes to Berkeley, Dominic-Luc Webb
  • Re: [ATM] Dominic goes to Berkeley, William Marriott
• [ATM] Epoxy mirrors (again), Wayne Young
  • Re: [ATM] Epoxy mirrors (again), Thomas Janstrom
  • Re: [ATM] Epoxy mirrors (again), Dream - Telescopes & Accessories, Inc.
    • Re: [ATM] Epoxy mirrors (again), Thomas Janstrom
      • Re: [ATM] Epoxy mirrors (again), Wayne Young
      • Re: [ATM] Epoxy mirrors (again), Thomas Janstrom
    • Re: [ATM] Epoxy mirrors (again), Wayne Young
      • Re: [ATM] Epoxy mirrors (again), Dream - Telescopes & Accessories, Inc.
      • Re: [ATM] Epoxy mirrors (again), Wayne Young
  • Re: [ATM] Epoxy mirrors (again), Terin Lyr D'Amico
• [ATM] Flat lap foundations, Tony Gondola
  • Re: [ATM] Flat lap foundations, hermit
  • Re: [ATM] Flat lap foundations, Mike Lockwood
    • Re: [ATM] Flat lap foundations, =?Windows-1250?Q?Attila_Schn=E9?=
• Re: [ATM] flat querry, jsanchez
• Re: [ATM] flat query, Mike Lockwood
  • Re: [ATM] flat query, Jerry Reddell
    • Re: [ATM] flat query, Mike Lockwood
      • Re: [ATM] flat query, Stan Truitt
  • Re: [ATM] flat query, shyam rathod
    • Re: [ATM] flat query, Mike Lockwood
  • <Possible follow-up(s)>
  • Re: [ATM] flat query, Stan Truitt
    • [ATM] 12 inch/f5,4 Travel- Dobson, Stathis Kafalis
      • Re: [ATM] 12 inch/f5,4 Travel- Dobson, Ross Sackett
      • Re: [ATM] 12 inch/f5,4 Travel- Dobson, Mark
      • Re: [ATM] 12 inch/f5,4 Travel- Dobson, Mike Lockwood
• Re: [ATM] Flex mirror adhesive, Andre Yanoviak
  • Re: [ATM] Flex mirror adhesive, Bill Kelley
• [ATM] FW: Recommendations for pyrex blanks, Rappe', Mike
  • Re: [ATM] FW: Recommendations for pyrex blanks, Mark Holm
  • <Possible follow-up(s)>
  • Re: [ATM] FW: Recommendations for pyrex blanks, Polk, Tom
• [ATM] Fwd: Second Mirror, HalbertMusik
• [ATM] Fwd: Re: Polishing to a sphere, Ken Hunter
• [ATM] Fwd: Re: Care Package, Ken Hunter
• [ATM] Glass type, lance clarke
  • Re: [ATM] Glass type, Jerry
    • Re: [ATM] Glass type, lance clarke
    • Re: [ATM] Glass type, Richard F.L.R. Snashall
      • Re: [ATM] Glass type, Richard F.L.R. Snashall
      • Re: [ATM] Glass type, Thomas Janstrom
      • Re: [ATM] Glass type, Richard F.L.R. Snashall
  • <Possible follow-up(s)>
  • Re: [ATM] Glass type, GARY FUCHS
• [ATM] Grinding plate, Jerry Dove
  • Re: [ATM] Grinding plate, Vladimir Galogaza
    • Re: [ATM] Grinding plate, Jerry Dove
• Re: [ATM] Here is what happens when you warm the edge of a 18 x 2Pyrex mirror, Scott Milligan
  • Re: [ATM] Here is what happens when you warm the edge of a 18 x 2Pyrex mirror, Dale Eason
• [ATM] improper posting, jeff newsom
• [ATM] Looking for a source of ApplePly plywood, Rappe', Mike
  • Re: [ATM] Looking for a source of ApplePly plywood, Lawrence Sayre
    • Re: [ATM] Looking for a source of ApplePly plywood, atm
      • Re: [ATM] Looking for a source of ApplePly plywood, Daniel Fundo
  • <Possible follow-up(s)>
  • Re: [ATM] Looking for a source of ApplePly plywood, NGC704
  • Re: [ATM] Looking for a source of ApplePly plywood, John Sherman
    • Re: [ATM] Looking for a source of ApplePly plywood, Terin Lyr D'Amico
  • Re: [ATM] Looking for a source of ApplePly plywood, NGC704
    • Re: [ATM] Looking for a source of ApplePly plywood, hermit
  • Re: [ATM] Looking for a source of ApplePly plywood, Rappe', Mike
• Re: [ATM] Looking for Eyepiece Focal, Hugues.Laroche
• [ATM] Looking for: The ATM Page, Jarvis Krumbein
• [ATM] Looking for: The ATM Page - Eyepiece Focal Positions, Andre Yanoviak
  • Re: [ATM] Looking for: The ATM Page - Eyepiece Focal Positions, Bill Prewitt
    • Re: [ATM] Looking for: The ATM Page - Eyepiece Focal Positions, Andre Yanoviak
  • Re: [ATM] Looking for: The ATM Page - Eyepiece Focal Positions, Vladimir Galogaza
• Re: [ATM] making carbon tubes, matt
• [ATM] Meade 4.5" mini-DOB binocular project., stU
  • Re: [ATM] Meade 4.5" mini-DOB binocular project., Mark Holm
• [ATM] meade saturn scope, j h
  • Re: [ATM] meade saturn scope, Mike Lockwood
  • Re: [ATM] meade saturn scope, Mark Holm
• [ATM] Mel's wire spider, Rod Brackenridge
  • Re: [ATM] Mel's wire spider, Mel Bartels
  • Re: [ATM] Mel's wire spider, Dave Smith
  • <Possible follow-up(s)>
  • Re: [ATM] Mel's wire spider, Rod Brackenridge
• [ATM] Mirror figuring problem, Cory Kreutzer
  • <Possible follow-up(s)>
  • Re: [ATM] Mirror figuring problem, Aplanatic
    • Re: [ATM] Mirror figuring problem, Mark Holm
      • Re: [ATM] Mirror figuring problem, Cory Kreutzer
• [ATM] modern herschelian telescope, ccabar
  • <Possible follow-up(s)>
  • Re: [ATM] modern herschelian telescope, John Sherman
    • Re: [ATM] modern herschelian telescope, Vladimir Galogaza
  • [ATM] modern Herschelian telescope, ccabar
  • Re: [ATM] modern Herschelian telescope, John Sherman
• [ATM] Mounting lenses, Polaraligned
  • Re: [ATM] Mounting lenses, Richard
  • <Possible follow-up(s)>
  • Re: [ATM] Mounting lenses, Scott Milligan
• [ATM] newark (new jersey), Saqib Sajjad
  • Re: [ATM] newark (new jersey), Dominic-Luc Webb
• [ATM] Off-axis Newt, The Alarm Co.
  • Re: [ATM] Off-axis Newt, stU
  • Re: [ATM] Off-axis Newt, =?Windows-1250?Q?Attila_Schn=E9?=
  • <Possible follow-up(s)>
  • Re: [ATM] Off-axis Newt, John Sherman
    • Re: [ATM] Off-axis Newt, Mark Holm
      • Re: [ATM] Off-axis Newt, Jerry Reddell
• [ATM] Patent: Apparatus and methods for focusing and collimatingtelescopes, atm
  • Re: [ATM] Patent: Apparatus and methods for focusing andcollimating telescopes, Richard F.L.R. Snashall
  • Re: [ATM] Patent: Apparatus and methods for focusing andcollimating telescopes, John Lynch
    • Re: [ATM] Patent: Apparatus and methods for focusingand collimating telescopes, Don Clement
• Re: [ATM] Patent: Apparatus and methods for focusing andcollimating telescopes, atm
• [ATM] PLOP, Jerry Dove
  • Re: [ATM] PLOP, James P Crombie
    • Re: [ATM] PLOP, Jerry Dove
• [ATM] Polish / figure question, j h
  • Re: [ATM] Polish / figure question, =?Windows-1250?Q?Attila_Schn=E9?=
  • Re: [ATM] Polish / figure question, William Marriott
• [ATM] Polishing stroke, j h
  • Re: [ATM] Polishing stroke, Mike Lockwood
  • Re: [ATM] Polishing stroke, Jim Burrows
    • Re: [ATM] Polishing stroke, hermit
  • <Possible follow-up(s)>
  • Re: [ATM] Polishing stroke, Polk, Tom
    • Re: [ATM] Polishing stroke, Mike Lockwood
  • Re: [ATM] Polishing stroke, Polk, Tom
    • Re: [ATM] Polishing stroke, William Marriott
  • Re: [ATM] Polishing stroke, Polk, Tom
  • Re: [ATM] Polishing stroke, Polk, Tom
    • Re: [ATM] Polishing stroke, Mike Lockwood
  • Re: [ATM] Polishing stroke, Polk, Tom
• [ATM] Polishing to a sphere, Gilbert Gagne
  • Re: [ATM] Polishing to a sphere, Vladimir Galogaza
    • Re: [ATM] Polishing to a sphere, Gilbert Gagne
  • Re: [ATM] Polishing to a sphere, Guy Brandenburg
    • Re: [ATM] Polishing to a sphere, Bob Liesenfeld
  • Re: [ATM] Polishing to a sphere, Bill Kelley
    • Re: [ATM] Polishing to a sphere, Gilbert Gagne
      • Re: [ATM] Polishing to a sphere, Thomas Janstrom
      • Re: [ATM] Polishing to a sphere, Mike Lockwood
      • Re: [ATM] Polishing to a sphere, Gilbert Gagne
• [ATM] Quick fractions question...., Thomas Janstrom
  • Re: [ATM] Quick fractions question...., Vladimir Galogaza
    • Re: [ATM] Quick fractions question...., Thomas Janstrom
  • Re: [ATM] Quick fractions question...., vladimir sacek
  • Re: [ATM] Quick fractions question...., Mike Lockwood
    • Re: [ATM] Quick fractions question...., Thomas Janstrom
      • Re: [ATM] Quick fractions question...., Vladimir Galogaza
      • Re: [ATM] Quick fractions question...., Thomas Janstrom
• [ATM] RINI eyepieces, John Lynch
• [ATM] Rini Optics, John Lynch
  • Re: [ATM] Rini Optics, Thomas Janstrom
  • Re: [ATM] Rini Optics, Dave Smith
  • <Possible follow-up(s)>
  • Re: [ATM] Rini Optics, scopemaker
• [ATM] rules, John Sherman
  • Re: [ATM] rules, Mark Holm
  • Re: [ATM] rules, Sergeant Pinback
    • Re: [ATM] rules, Mark Holm
• Re: [ATM] Sasian article, The Alarm Co.
• [ATM] Sasian articles, The Alarm Co.
  • Re: [ATM] Sasian articles, Mark Holm
• [ATM] Schmidt corrector tools, George Anderson
  • Re: [ATM] Schmidt corrector tools, Dominic-Luc Webb
    • Re: [ATM] Schmidt corrector tools, George Anderson
  • Re: [ATM] Schmidt corrector tools, vladimir sacek
• [ATM] Short Flint Oil-Spaced Triplets, Richard F.L.R. Snashall
  • [ATM] Telescope Optics Workshop - rescheduled for March 2007, astro guy
• Re: [ATM] Slight small toll, mjlazo
  • Re: [ATM] Slight small toll, hermit
    • Re: [ATM] Slight small toll, Jim Burrows
      • Re: [ATM] Slight small toll, hermit
• [ATM] Slitting metal, Douglas Arion
  • Re: [ATM] Slitting metal, Wayne Young
  • Re: [ATM] Slitting metal, Thomas Janstrom
  • Re: [ATM] Slitting metal, David Wilbur
  • Re: [ATM] Slitting metal, Don Clement
  • Re: [ATM] Slitting metal, James P Crombie
  • <Possible follow-up(s)>
  • Re: [ATM] Slitting metal, GARY FUCHS
  • Re: [ATM] Slitting metal, GARY FUCHS
• [ATM] Small .25-.5" turned edge, Robert Fifarek
  • <Possible follow-up(s)>
  • [ATM] Small .25-.5" turned edge, Robert Fifarek
• [ATM] Stardust, Don Clement
• Re: [ATM] Stars, Sergeant Pinback
  • <Possible follow-up(s)>
  • Re: [ATM] Stars, Wayne Young
    • Re: [ATM] Stars, Sergeant Pinback
    • Re: [ATM] Stars, Vladimir Galogaza
    • Re: [ATM] Stars, Jim Burrows
  • Re: [ATM] Stars, Leftfieldstar
  • Re: [ATM] Stars, John Sherman
• [ATM] Support for a slumped mirror blank, vorblesnak
• [ATM] Support for slumped mirror, Jerry Dove
  • Re: [ATM] Support for slumped mirror, Vladimir Galogaza
    • Re: [ATM] Support for slumped mirror, Ken Hunter
    • Re: [ATM] Support for slumped mirror, Jerry Dove
  • Re: [ATM] Support for slumped mirror, astro guy
  • <Possible follow-up(s)>
  • Re: [ATM] Support for slumped mirror, Jerry Dove
    • Re: [ATM] Support for slumped mirror, Guy Brandenburg
      • Re: [ATM] Support for slumped mirror, Vladimir Galogaza
      • [ATM] masking for aluminizing, tillerman1
      • Re: [ATM] masking for aluminizing, Richard
      • Re: [ATM] masking for aluminizing, George Anderson
      • Re: [ATM] masking for aluminizing, Pete
      • Re: [ATM] masking for aluminizing, Mark Holm
      • Re: [ATM] masking for aluminizing, Ken Hunter
      • Re: [ATM] masking for aluminizing, George Anderson
      • Re: [ATM] masking for aluminizing, Vladimir Galogaza
      • Re: [ATM] Support for slumped mirror, Guy Brandenburg
    • Message not available
      • Re: [ATM] Support for slumped mirror, Jerry Dove
  • Re: [ATM] Support for slumped mirror, Scott Milligan
    • Re: [ATM] Support for slumped mirror, Gilbert Gagne
      • Re: [ATM] Support for slumped mirror, Vladimir Galogaza
      • Re: [ATM] Support for slumped mirror, Ric Rokosz
      • Re: [ATM] Support for slumped mirror, Vladimir Galogaza
  • [ATM] Support for slumped mirror, Polk, Tom
  • Re: [ATM] Support for slumped mirror, Robert OToole
    • Re: [ATM] Support for slumped mirror, Mike Lockwood
    • Re: [ATM] Support for slumped mirror, Vladimir Galogaza
  • Re: [ATM] Support for slumped mirror, Arjan te Marvelde
  • Re: [ATM] Support for slumped mirror, Polk, Tom
  • Re: [ATM] Support for slumped mirror, Arjan te Marvelde
• [ATM] Test - please ignore., Wayne Young
• [ATM] The 15.5 Ultrathin project, vorblesnak
  • [ATM] Induced astig experiment or how to torture a mirror., Dale Eason
  • Message not available
    • Message not available
      • Re: [ATM] The 15.5 Ultrathin project, Vladimir Galogaza
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, vorblesnak
  • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Peter
  • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Peter
  • <Possible follow-up(s)>
  • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, GARY FUCHS
  • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, GARY FUCHS
  • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, GARY FUCHS
    • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Dale Eason
      • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Martti Koskimo
      • Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion, Peter
• [ATM] The 15.5 Ultrathin Project, more polishing notes, vorblesnak
  • [ATM] Here is what happens when you warm the edge of a 18 x 2 Pyrexmirror, Dale Eason
• [ATM] The 15.5 Ultrathin Project, some lap notes, vorblesnak
  • <Possible follow-up(s)>
  • [ATM] The 15.5 Ultrathin Project, some lap notes, jeff newsom
    • Re: [ATM] The 15.5 Ultrathin Project, some lap notes, Richard
  • Re: [ATM] The 15.5 Ultrathin Project, some lap notes, vorblesnak
• [ATM] The 15.5 Ultrathin Project, some polishing thoughts, vorblesnak
  • Re: [ATM] The 15.5 Ultrathin Project, some polishing thoughts, Vladimir Galogaza
• [ATM] The 15.5 Ultrathin Project, some ronchi pictures, vorblesnak
  • Re: [ATM] The 15.5 Ultrathin Project, some ronchi pictures, Ken Hunter
• [ATM] The Moon Clock, Aplanatic
  • Re: [ATM] The Moon Clock, George Anderson
• [ATM] The Schiefspiegler (Oblique Telescope), Gleanings Bulletin A, Mark Holm
• [ATM] Trepanning speeds, Thomas Janstrom
• [ATM] Truss Poles, Tim Nott
  • Re: [ATM] Truss Poles, Ross Sackett
• [ATM] TUE Turned up edge, Rodney Mayes
  • Re: [ATM] TUE Turned up edge, hermit
    • Re: [ATM] TUE Turned up edge, Rodney Mayes
    • Re: [ATM] TUE Turned up edge, Rodney Mayes
  • Re: [ATM] TUE Turned up edge, Mike Lockwood
• [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN 30"mirror from Hong Kong, Peter
  • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30" mirror from Hong Kong, aplanatic
  • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30" mirror from Hong Kong, Mark Holm
    • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30" mirror from Hong Kong, Mike Lockwood
  • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30"mirror from Hong Kong, Vladimir Galogaza
    • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong, Jerry
• [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong, vorblesnak
  • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong, Dream - Telescopes & Accessories, Inc.
    • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong, Dale Eason
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free] ULTRA-THIN30"mirror from Hong Kong, Richard F.L.R. Snashall
    • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong, vorblesnak
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong, Peter
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Cord Scholz
      • Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, A. Suijkerbuijk
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Richard
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Nils Olof Carlin
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Richard
      • Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Cord Scholz
      • Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Richard
      • Re: [ATM] Ultra-Thin Edge Support Idea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Cord Scholz
      • Re: [ATM] Ultra-Thin Edge Support Idea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Richard
      • Re: [ATM] Ultra-Thin Edge SupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, James Lerch
      • Re: [ATM] Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, A. Suijkerbuijk
      • Re: [ATM] Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, James Lerch
      • Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, A. Suijkerbuijk
      • Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Mel Bartels
      • [ATM] Astatic Mirror Support and Lateral Edge Supports for UltraThin Mirrors, Peter
      • [ATM] making carbon tubes, Cord Scholz
      • Re: [ATM] making carbon tubes, RodShea
      • [ATM] Ronchi quiz, Dale Eason
      • Re: [ATM] Ronchi quiz, Richard Ozer
      • Re: [ATM] Ronchi quiz, Jeff Baldwin
      • [ATM] Ronchi Quiz Part 2, Dale Eason
      • [ATM] 6" F4.5 Figuring Question, Jason Lehmann
      • Re: [ATM] 6" F4.5 Figuring Question, Jim Burrows
      • Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free] ULTRA-THIN30"mirror from Hong Kong, Mark Holm
• Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Cord Scholz
• Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Arjan te Marvelde
  • <Possible follow-up(s)>
  • Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong, Jarvis Krumbein
• [ATM] Using Barlow to reduce Coma, Mark
  • Re: [ATM] Using Barlow to reduce Coma, Mel Bartels
    • Re: [ATM] Using Barlow to reduce Coma, Mark
      • Re: [ATM] Using Barlow to reduce Coma, Richard F.L.R. Snashall
      • Re: [ATM] Using Barlow to reduce Coma, Jean-Guy Moreau
      • Re: [ATM] Using Barlow to reduce Coma, Andy Saulietis
      • Re: [ATM] Using Barlow to reduce Coma, Mel Bartels
  • Re: [ATM] Using Barlow to reduce Coma, Mark
    • Re: [ATM] Using Barlow to reduce Coma, Cord Scholz
  • <Possible follow-up(s)>
  • Re: [ATM] Using Barlow to reduce Coma, A. Suijkerbuijk
    • Message not available
      • Re: [ATM] Using Barlow to reduce Coma, A. Suijkerbuijk
      • Re: [ATM] Using Barlow to reduce Coma, Nils Olof Carlin
• [ATM] Will a star diagonal fit a Meade 114N 4.5" without moving thesecondary?, stU
• [ATM] Wilsonart Ebony Star, Rappe', Mike
  • Re: [ATM] Wilsonart Ebony Star, James P Crombie
  • <Possible follow-up(s)>
  • Re: [ATM] Wilsonart Ebony Star, NGC704
  • Re: [ATM] Wilsonart Ebony Star, John Sherman
• [ATM] wire spiders, John Sherman
  • Re: [ATM] wire spiders, Terin Lyr D'Amico
  • <Possible follow-up(s)>
  • Re: [ATM] wire spiders, Terin Lyr D'Amico
    • Re: [ATM] wire spiders, Alan Scott
  • Re: [ATM] wire spiders, Terin Lyr D'Amico
  • Re: [ATM] wire spiders, Nils Olof Carlin
    • Re: [ATM] wire spiders, Daniel Fundo
      • Re: [ATM] wire spiders, Mike Lockwood
    • Re: [ATM] wire spiders, Alan Scott
  • Re: [ATM] wire spiders, Nils Olof Carlin
    • Re: [ATM] wire spiders, Mel Bartels
      • Re: [ATM] wire spiders, Alan Scott
  • [ATM] wire spiders, Tim Nott
  • [ATM] wire spiders, Tim Nott
    • Re: [ATM] wire spiders, Don Clement
• Re: [ATM]Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirrorfrom Hong Kong, Nils Olof Carlin
  • Re: [ATM]Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirrorfrom Hong Kong, Mel Bartels
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data