[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] TUE Turned up edge

To: <atm@atmlist.net>
Subject: [ATM] TUE Turned up edge
From: "Rodney Mayes" <rgmayes@bellsouth.net>
Date: Sun, 22 Jan 2006 01:57:38 -0600
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Hi,  I haven't posted in quite some time, but I could sure use some help at this point.  I definately have a turned up edge on my 10" f/7.5.  It is completly polished.  I believe I have a high center as well.  My question is this: can one begin parobolizing on a mirror with TUE?  Will deepening the center by parobolizing eliminate the TUE?  Or, is this just wishful thinking?  Would you try reducing the edge first then working the center?  Work the center first?  Forgive my ignorance.  First time mirror maker here.  Any help appreciated.  Thanks in advance.  Rodney
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] TUE Turned up edge
  - From: hermit <hermit@outofoptions.org>
- Re: [ATM] TUE Turned up edge
  - From: Mike Lockwood <melockwo@uiuc.edu>

Prev by Author: Re: [ATM] Mel's wire spider
Next by Author: Re: [ATM] TUE Turned up edge
Prev by thread: Re: [ATM] Truss Poles
Next by thread: Re: [ATM] TUE Turned up edge
Index(es):
- Author
- Thread