[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: [ATM] Support for slumped mirror
Tom,
> Thanks for passing this along. I'm considering using this method with a
> 12.5" plate glass f5.4 that is 0.73" thick and a blank of the same size
> and thickness. Neither the mirror or blank are slumped.
Why do you need backing for this mirror? It is not that thin.
A 10"-f6-same thickness, gave no noticeable heat or pressure induced
effects. If you randomize your moves, use a plaster tool and touch the glass
mainly at the center it should turn out OK.
Regards,
AtM
_______________________________________________
ATM mailing list http://www.atmlist.net/