[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] masking for aluminizing

Thanks Richard

We probably have some high vaccum grease in the lab at work (we have a
setup for making specialized wavelength lamps) and I'll see what I can
scrounge.

George

Clear skies and good health

Richard wrote:
> 
> Hi tillerman1,
> 
> Tuesday, January 17, 2006, 2:31:22 PM, you wrote:
> 
> tvc> What is the best/easiest method for masking surfaces not
> tvc> to be aluminzed while a mirror/lens is in the
> tvc> chamber?
> 
> Probably any type of paint would work, but it is very bad for
> the high vacuum system. If you have access to it, Edwards High
> Vaccum grease will stop the Al sticking and won't upset the HV
> system. Don't use anything that is likely to outgas.
> 
> --
> 
> Best regards,
>   Richard in the UK
> 
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
_______________________________________________
ATM mailing list http://www.atmlist.net/