[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Slitting metal

Hi Doug

Have you tried tin-snips ?
They come in three "flavours" : left turn, right turn and straight - you 
probably want the variety for cutting straight.

Wayne

----- Original Message ----- 
From: "Douglas Arion" <darion@carthage.edu>
To: <atm@atmlist.net>
Sent: Tuesday, January 10, 2006 8:29 PM
Subject: [ATM] Slitting metal


>I am thinking of using thin stainless shim stock  (0.010"
> or less) to make spider vanes...but the question is how to
> cut it to shape. It's available in strips perhaps 6" wide,
> and I'll need strips that are 0.5 to 0.75 in wide.
> Suggestions?
>
> Thanks,
> Doug Arion
>
>
>
> _________________________________
> Dr. Douglas N. Arion
> Hedberg Distinguished Professor of Entrepreneurial Studies
> Professor of Physics
> Head Coach, Ice Hockey
> Carthage College
> 2001 Alford Park Drive
> Kenosha, WI 53140
> 262-551-5864
> 262-551-6208 (Fax)
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 


_______________________________________________
ATM mailing list http://www.atmlist.net/