Amateur Telescope Makers (ATM) Archive for JAN06 - by author

• Thread Index

• Re: [ATM] 16"RCC mirror
  • From: Attila Schné <yolo@chello.hu>
• [ATM] APO design
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• [ATM] APO design
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] APO design
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] Polish / figure question
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] Dirty Design Trick
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] Attempted Parametrization of a Petzval Design
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• [ATM] 16" RCC primary
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• [ATM] 16" RCC primary
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• [ATM] 16"RCC mirror
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] Flat lap foundations
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] Off-axis Newt
  • From: =?Windows-1250?Q?Attila_Schn=E9?= <yolo@chello.hu>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] wire spiders
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] wire spiders
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] wire spiders
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] Flex mirror adhesive
  • From: "Andre Yanoviak" <andre_y6@hotmail.com>
• Re: [ATM] Alan Adler's Flex Mirror specs
  • From: "Andre Yanoviak" <andre_y6@hotmail.com>
• [ATM] Looking for: The ATM Page - Eyepiece Focal Positions
  • From: "Andre Yanoviak" <andre_y6@hotmail.com>
• Re: [ATM] Looking for: The ATM Page - Eyepiece Focal Positions
  • From: "Andre Yanoviak" <andre_y6@hotmail.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Dense
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Mirror figuring problem
  • From: Aplanatic@aol.com
• [ATM] The Moon Clock
  • From: Aplanatic@aol.com
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30" mirror from Hong Kong
  • From: aplanatic@aol.com
• Re: [ATM] Support for slumped mirror
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Support for slumped mirror
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Autocollimation Oil Test
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] ATM Digest, Vol 25, Issue 27
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Telescope Optics Workshop - rescheduled for March 2007
  • From: "astro guy" <opticsguy@hotmail.com>
• Re: [ATM] Support for slumped mirror
  • From: "astro guy" <opticsguy@hotmail.com>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: <atm@hudler.org>
• [ATM] Patent: Apparatus and methods for focusing and collimatingtelescopes
  • From: <atm@hudler.org>
• Re: [ATM] Patent: Apparatus and methods for focusing andcollimating telescopes
  • From: <atm@hudler.org>
• Re: [ATM] Polishing speed
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: [ATM] Autocollimation Oil Test
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• [ATM] Central hole during polishing
  • From: Balaji Ramani <balaji@netapp.com>
• Re: [ATM] Central hole during polishing
  • From: Balaji Ramani <balaji@netapp.com>
• Re: [ATM] Flex mirror adhesive
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Polishing to a sphere
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Looking for: The ATM Page - Eyepiece Focal Positions
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• Re: [ATM] Polishing to a sphere
  • From: Bob Liesenfeld <wb0poq@visi.com>
• [ATM] modern herschelian telescope
  • From: "ccabar" <ccabar@bigpond.com>
• [ATM] modern Herschelian telescope
  • From: "ccabar" <ccabar@bigpond.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Cord Scholz" <cord@astro-image.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Cord Scholz" <cord@astro-image.com>
• Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Cord Scholz" <cord@astro-image.com>
• Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Cord Scholz" <cord@astro-image.com>
• Re: [ATM] Ultra-Thin Edge Support Idea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Cord Scholz" <cord@astro-image.com>
• [ATM] making carbon tubes
  • From: "Cord Scholz" <cord@astro-image.com>
• [ATM] Mirror figuring problem
  • From: "Cory Kreutzer" <cjkreutze@comcast.net>
• Re: [ATM] Mirror figuring problem
  • From: "Cory Kreutzer" <cjkreutze@comcast.net>
• [ATM] Here is what happens when you warm the edge of a 18 x 2 Pyrexmirror
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Here is what happens when you warm the edge of a 18 x 2Pyrex mirror
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Induced astig experiment or how to torture a mirror.
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] A interferometric study of plate glass mirror edge heating
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Ronchi quiz
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Ronchi Quiz Part 2
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] wire spiders
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Mel's wire spider
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Rini Optics
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Slitting metal
  • From: David Wilbur <david.wilbur@tufts.edu>
• [ATM] Dominic goes to Berkeley
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Schmidt corrector tools
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] newark (new jersey)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Slitting metal
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Stardust
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] wire spiders
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Autocollimation Oil Test
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Patent: Apparatus and methods for focusingand collimating telescopes
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Slitting metal
  • From: "Douglas Arion" <darion@carthage.edu>
• [ATM] Acculap problems....
  • From: "Douglas Arion" <darion@carthage.edu>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] 16" RCC primary
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• [ATM] Back to pushing glass
  • From: edwski@comcast.net
• Re: [ATM] Slitting metal
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Slitting metal
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Glass type
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] The Moon Clock
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] Astro Speak,pilfered from Kingston RASC Astro Notes newsletter
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] masking for aluminizing
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] masking for aluminizing
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] Schmidt corrector tools
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Schmidt corrector tools
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] Polishing to a sphere
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] Polishing to a sphere
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] Polishing to a sphere
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] Support for slumped mirror
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] Polishing to a sphere
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] Polishing to a sphere
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Support for slumped mirror
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Polishing speed
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Support for slumped mirror
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Fwd: Second Mirror
  • From: HalbertMusik@aol.com
• Re: [ATM] Slight small toll
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Slight small toll
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Polishing stroke
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] TUE Turned up edge
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Flat lap foundations
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] bending square tubing (was: 12 inch/f5,4 Travel- Dobson)
  • From: Hugues.Laroche@ses-astra.com
• Re: [ATM] Looking for Eyepiece Focal
  • From: Hugues.Laroche@ses-astra.com
• [ATM] Polish / figure question
  • From: "j h" <quantemlp@hotmail.com>
• [ATM] Polishing stroke
  • From: "j h" <quantemlp@hotmail.com>
• [ATM] meade saturn scope
  • From: "j h" <quantemlp@hotmail.com>
• Re: [ATM] Ultra-Thin Edge SupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Slitting metal
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: [ATM] bending square tubing
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: [ATM] Wilsonart Ebony Star
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: [ATM] PLOP
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• [ATM] Looking for: The ATM Page
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] 6" F4.5 Figuring Question
  • From: "Jason Lehmann" <jtravel@bellsouth.net>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] Autocollimation Oil Test
  • From: "Jeff Baldwin" <bald@centurytel.net>
• Re: [ATM] (no subject)
  • From: "Jeff Baldwin" <bald@centurytel.net>
• Re: [ATM] Ronchi quiz
  • From: "Jeff Baldwin" <bald@centurytel.net>
• [ATM] The 15.5 Ultrathin Project, some lap notes
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] improper posting
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] detecting TDE before polishing
  • From: jeff newsom <triolian@earthlink.net>
• Re: [ATM] 16" RCC primary
  • From: Jeff Rowe <jroweapp@swbell.net>
• Re: [ATM] Autocollimation Oil Test
  • From: Jeff Rowe <jroweapp@swbell.net>
• Re: [ATM] Glass type
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Support for slumped mirror
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] Support for slumped mirror
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] Support for slumped mirror
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] Support for slumped mirror
  • From: Jerry Dove <jldove1@cableone.net>
• [ATM] Grinding plate
  • From: Jerry Dove <jldove1@cableone.net>
• [ATM] PLOP
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] PLOP
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] Grinding plate
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] flat query
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] Off-axis Newt
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] Slight small toll
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Stars
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Polishing stroke
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] 16" RCC primary
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] 16" RCC primary
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] 6" F4.5 Figuring Question
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Acculap problems....
  • From: John Lynch <john_lynch2006@yahoo.com>
• [ATM] Rini Optics
  • From: John Lynch <john_lynch2006@yahoo.com>
• [ATM] RINI eyepieces
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] Patent: Apparatus and methods for focusing andcollimating telescopes
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] 15.5 Ultrathin project
  • From: "John Sherman" <atm@mail.johnspics.com>
• [ATM] rules
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: "John Sherman" <atm@mail.johnspics.com>
• [ATM] wire spiders
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Stars
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Wilsonart Ebony Star
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] modern herschelian telescope
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Bending square alumminum tubing for side bearings.
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] modern Herschelian telescope
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Off-axis Newt
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Dense
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] flat querry
  • From: jsanchez@skipanon.com
• Re: [ATM] Carbon fiber tube
  • From: jsanchez@skipanon.com
• [ATM] Fwd: Re: Care Package
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Fwd: Re: Polishing to a sphere
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Support for slumped mirror
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] masking for aluminizing
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] The 15.5 Ultrathin Project, some ronchi pictures
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Glass type
  • From: "lance clarke" <alaskawolfjoe@hotmail.com>
• Re: [ATM] Glass type
  • From: "lance clarke" <alaskawolfjoe@hotmail.com>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: Lawrence Sayre <lsayre@neo.rr.com>
• Re: [ATM] Stars
  • From: Leftfieldstar@aol.com
• [ATM] Care Package
  • From: Mahmood Hassan <emhl95@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "Mark" <marco.miglionico@btinternet.com>
• [ATM] Using Barlow to reduce Coma
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Mark" <marco.miglionico@btinternet.com>
• [ATM] (no subject)
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] Mirror figuring problem
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] meade saturn scope
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] The Schiefspiegler (Oblique Telescope), Gleanings Bulletin A
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] rules
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] rules
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] FW: Recommendations for pyrex blanks
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] masking for aluminizing
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30" mirror from Hong Kong
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Meade 4.5" mini-DOB binocular project.
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free] ULTRA-THIN30"mirror from Hong Kong
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Sasian articles
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Off-axis Newt
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
• [ATM] Autocollimation Oil Test
  • From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
• Re: [ATM] Autocollimation Oil Test
  • From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
• Re: [ATM] Autocollimation Oil Test
  • From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
• Re: [ATM] Autocollimation Oil Test
  • From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
• Re: [ATM] making carbon tubes
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Dense
  • From: Matt Considine <matt@considine.net>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spiders
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Acculap problems....
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Acculap problems....
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Mel's wire spider
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Ultra-ThinEdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM]Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirrorfrom Hong Kong
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 10" scope and NASA
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] flat query
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] flat query
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] flat query
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Polishing stroke
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Polishing stroke
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] meade saturn scope
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Polishing stroke
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] wire spiders
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Polishing speed
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Polishing to a sphere
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Support for slumped mirror
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Flat lap foundations
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] TUE Turned up edge
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30" mirror from Hong Kong
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Quick fractions question....
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Central hole during polishing
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Aluminum bearing scrap discs
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Slight small toll
  • From: mjlazo@ifsc.usp.br
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: NGC704@aol.com
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: NGC704@aol.com
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: NGC704@aol.com
• Re: [ATM] Wilsonart Ebony Star
  • From: NGC704@aol.com
• Re: [ATM] wire spiders
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] wire spiders
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM]Ultra-Thin EdgeSupportIdea-RE:[atm_free]ULTRA-THIN30"mirrorfrom Hong Kong
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] masking for aluminizing
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: "Peter" <peter@kitgear.com>
• [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN 30"mirror from Hong Kong
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: "Peter" <peter@kitgear.com>
• [ATM] Astatic Mirror Support and Lateral Edge Supports for UltraThin Mirrors
  • From: "Peter" <peter@kitgear.com>
• [ATM] Mounting lenses
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Polishing stroke
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Polishing stroke
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Polishing stroke
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Polishing stroke
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Polishing stroke
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] FW: Recommendations for pyrex blanks
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• [ATM] Support for slumped mirror
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Support for slumped mirror
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• [ATM] Looking for a source of ApplePly plywood
  • From: "Rappe', Mike" <Mike.Rappe@hp.com>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: "Rappe', Mike" <Mike.Rappe@hp.com>
• [ATM] FW: Recommendations for pyrex blanks
  • From: "Rappe', Mike" <Mike.Rappe@hp.com>
• [ATM] Wilsonart Ebony Star
  • From: "Rappe', Mike" <Mike.Rappe@hp.com>
• [ATM] Bending square alumminum tubing for side bearings.
  • From: "Rappe', Mike" <Mike.Rappe@hp.com>
• Re: [ATM] Support for slumped mirror
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 16" RCC primary
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 16" RCC primary
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 16"RCC mirror
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 16"RCC mirror
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] APO design
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Carbon fiber tube
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Attempted Parametrization of a Petzval Design
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] The 15.5 Ultrathin Project, some lap notes
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] masking for aluminizing
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] 16" RCC primary
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Ultra-Thin Edge Support Idea -RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Ultra-Thin Edge Support Idea-RE:[atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Mounting lenses
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] APO design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Short Flint Oil-Spaced Triplets
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Dirty Design Trick
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Attempted Parametrization of a Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Attempted Parametrization of a Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Glass type
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Glass type
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Glass type
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Using Barlow to reduce Coma
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE:[atm_free] ULTRA-THIN30"mirror from Hong Kong
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Patent: Apparatus and methods for focusing andcollimating telescopes
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Ronchi quiz
  • From: "Richard Ozer" <rozer@pacbell.net>
• [ATM] Small .25-.5" turned edge
  • From: "Robert Fifarek" <Roboscope1@cox.net>
• [ATM] Small .25-.5" turned edge
  • From: "Robert Fifarek" <Roboscope1@cox.net>
• [ATM] (no subject)
  • From: "Robert Fifarek" <Roboscope1@cox.net>
• Re: [ATM] Support for slumped mirror
  • From: "Robert OToole" <polaris@gsinet.net>
• [ATM] 11.2" slumped blank and tool base for sale
  • From: "Robert OToole" <polaris@gsinet.net>
• [ATM] Mel's wire spider
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Mel's wire spider
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• [ATM] TUE Turned up edge
  • From: "Rodney Mayes" <rgmayes@bellsouth.net>
• Re: [ATM] TUE Turned up edge
  • From: "Rodney Mayes" <rgmayes@bellsouth.net>
• Re: [ATM] TUE Turned up edge
  • From: "Rodney Mayes" <rgmayes@bellsouth.net>
• Re: [ATM] making carbon tubes
  • From: "RodShea" <RodShea@comcast.net>
• Re: [ATM] 12 inch/f5,4 Travel- Dobson
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] Truss Poles
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] newark (new jersey)
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] Rini Optics
  • From: <scopemaker@peoplepc.com>
• Re: [ATM] Support for slumped mirror
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Here is what happens when you warm the edge of a 18 x 2Pyrex mirror
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Mounting lenses
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Stars
  • From: Sergeant Pinback <pinbackakabillfreug@yahoo.com>
• Re: [ATM] Stars
  • From: Sergeant Pinback <pinbackakabillfreug@yahoo.com>
• Re: [ATM] rules
  • From: Sergeant Pinback <pinbackakabillfreug@yahoo.com>
• Re: [ATM] flat query
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] flat query
  • From: Stan Truitt <s.truitt@verizon.net>
• Re: [ATM] flat query
  • From: Stan Truitt <s.truitt@verizon.net>
• [ATM] 12 inch/f5,4 Travel- Dobson
  • From: "Stathis Kafalis" <info@stathis-firstlight.de>
• Re: [ATM] A interferometric study of plate glass mirror edge heating
  • From: Stephen Koehler <s.c.koehler@gmail.com>
• Re: [ATM] Autocollimation Oil Test
  • From: "Steven L. Dodds" <steve@pcmw.net>
• [ATM] Meade 4.5" mini-DOB binocular project.
  • From: "stU" <stu@aaronj.com>
• [ATM] Will a star diagonal fit a Meade 114N 4.5" without moving thesecondary?
  • From: "stU" <stu@aaronj.com>
• Re: [ATM] Off-axis Newt
  • From: "stU" <stu@aaronj.com>
• Re: [ATM] Looking for a source of ApplePly plywood
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] wire spiders
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] wire spiders
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] wire spiders
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] Off-axis Newt
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] Sasian articles
  • From: "The Alarm Co." <tac@i1.net>
• Re: [ATM] Sasian article
  • From: "The Alarm Co." <tac@i1.net>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Slitting metal
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Glass type
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Polishing to a sphere
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Rini Optics
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] Trepanning speeds
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] Quick fractions question....
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Quick fractions question....
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Quick fractions question....
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Quick fractions question....
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] masking for aluminizing
  • From: tillerman1@videotron.ca
• [ATM] Truss Poles
  • From: "Tim Nott" <timothy.nott@ims.sa.edu.au>
• [ATM] wire spiders
  • From: "Tim Nott" <timothy.nott@ims.sa.edu.au>
• [ATM] wire spiders
  • From: "Tim Nott" <timothy.nott@ims.sa.edu.au>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "Tom Moulton" <tom@moulton.us>
• [ATM] Flat lap foundations
  • From: Tony Gondola <acgna@comcast.net>
• [ATM] 12 inch/f5,4 Travel- Dobson
  • From: ulli vedder <ulli.vedder@t-online.de>
• [ATM] 12 inch/f5,4 Travel- Dobson
  • From: ulli vedder <ulli.vedder@t-online.de>
• [ATM] bending square tubing (was: 12 inch/f5,4 Travel- Dobson)
  • From: ulli vedder <ulli.vedder@t-online.de>
• Re: [ATM] 16" RCC primary
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] 16" RCC primary
  • From: "vladimir" <svla@isp.com>
• [ATM] 10" scope and NASA
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Stars
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] 16" mirror in 1" thick glass for Newbie
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Polishing to a sphere
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Support for slumped mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Support for slumped mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Support for slumped mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] masking for aluminizing
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Polishing speed
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Support for slumped mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Support for slumped mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] The 15.5 Ultrathin Project, some polishing thoughts
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Looking for: The ATM Page - Eyepiece Focal Positions
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] The 15.5 Ultrathin project
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Grinding plate
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Autocollimation Oil Test
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] modern herschelian telescope
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free] ULTRA-THIN30"mirror from Hong Kong
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Quick fractions question....
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Quick fractions question....
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Schmidt corrector tools
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Quick fractions question....
  • From: "vladimir sacek" <vla@toast.net>
• [ATM] 15.5 Ultrathin project
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, some lap notes
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, more polishing notes
  • From: vorblesnak@peak.org
• Re: [ATM] The 15.5 Ultrathin Project, some lap notes
  • From: vorblesnak@peak.org
• [ATM] A Successful Experiment
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, some ronchi pictures
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, some polishing thoughts
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin Project, Astigmatism discussion
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultrathin project
  • From: vorblesnak@peak.org
• [ATM] Support for a slumped mirror blank
  • From: vorblesnak@peak.org
• [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: vorblesnak@peak.org
• Re: [ATM] Ultra-Thin Edge Support Idea - RE: [atm_free]ULTRA-THIN30"mirror from Hong Kong
  • From: vorblesnak@peak.org
• [ATM] Test - please ignore.
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• Re: [ATM] Stars
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• [ATM] Epoxy mirrors (again)
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• Re: [ATM] Slitting metal
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• Re: [ATM] Epoxy mirrors (again)
  • From: "Wayne Young" <atm@ganimede.demon.co.uk>
• Re: [ATM] Polish / figure question
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Polishing stroke
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Dominic goes to Berkeley
  • From: William Marriott <bmarriott@pacbell.net>
• [ATM] Aluminum bearing scrap discs
  • From: William Marriott <bmarriott@pacbell.net>