[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Laminating Dibond

To: atm@atmlist.net
Subject: Re: [ATM] Laminating Dibond
From: Mark Holm <mdholm@telerama.com>
Date: Sat, 15 Jan 2005 21:01:57 -0500
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net
User-Agent: Mozilla Thunderbird 0.8 (Windows/20041010)

Ordinary epoxy glues of the not too fast curing variety usually stick 
pretty well to aluminum, especially if you rough up the surface a bit 
with medium to fine sand paper.  Can't say for sure about adhesion to 
paint.  It may vary some among paint types.  If you rough it up with 
sandpaper first, the chances are reasonably good with most any decent 
grade of epoxy.

-- 
Mark Holm
mdholm@telerama.com


_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] Aluminizing
Next by Author: Re: [ATM] simple Galilean Scope
Prev by thread: [ATM] Laminating Dibond
Next by thread: [ATM] Lerch's Robo Foucault VS. Interferometry, revisited
Index(es):
- Author
- Thread