[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Re: ATM Digest, Vol 13, Issue 8

To: <atm@atmlist.net>
Subject: Re: [ATM] Re: ATM Digest, Vol 13, Issue 8
From: "Bob May" <bobmay@nethere.com>
Date: Thu, 6 Jan 2005 10:18:02 -0800
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <1105013575.41dd2b47ce6eb@modem.webmail.t-online.de>
Sender: atm-bounces@atmlist.net

What you really need to do is prestress the bearings a little bit so that
there is no slop in the motion of the OTA.  What is happening is that you
are taking out the slop of the bearings as you move from one direction to
the other.
Bob May
bobmay@nethere.com
http://nav.to/bobmay
http://bobmay.astronomy.net

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Re: ATM Digest, Vol 13, Issue 8
  - From: martin.cibulski@t-online.de

Prev by Author: Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in the mirror: theresults...(long)
Next by Author: Re: [ATM] bending square aluminium tube
Prev by thread: Re: [ATM] Re: ATM Digest, Vol 13, Issue 8
Next by thread: Re: [ATM] Re: ATM Digest, Vol 13, Issue 8
Index(es):
- Author
- Thread