Amateur Telescope Makers (ATM) Archive for JAN05 - by author

• Thread Index

• [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in the mirror: the results...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in themirror:theresults...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in the mirror:theresults...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient in the mirror : theresults...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient in the mirror :theresults...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Ball bearing for triangles,spherical aberration causedbythermal gradient in themirror :theresults...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• [ATM] Control of spherical aberation using paracorr : was Ballbearing for triangles,spherical aberrationcausedbythermal gradient inthe mirror:theresults...(long)
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient in the mirror : the results...(long)
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] Ball bearing for triangles,spherical aberration causedbythermal gradient in the mirror :theresults...(long)
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• Re: [ATM] Ball bearing for triangles,spherical aberrationcausedbythermal gradient in the mirror:theresults...(long)
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• [ATM] Hamiltonian Refractor
  • From: "Alfredo Rainho Neves" <aneves@snowsoft.biz>
• Re: [ATM] A little scope for my Dad :)
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] A little scope for my Dad :)
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] Blank question
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Re: Aero Ektar Coma Corrector?
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Hamiltonian Refractor
  • From: aneves@snowsoft.biz
• [ATM] RE: Stabilizing plate glass
  • From: aneves@snowsoft.biz
• [ATM] Figuring Volume
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] simple Galilean Scope
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] 3 Inch Off Axis Schmidt Camera?
  • From: Aplanatic@aol.com
• RE: [ATM] Temperature-changes
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Carbon and cold weather
  • From: "at making" <atmaking@hotmail.com>
• [ATM] secondary support holes:thanks
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• [ATM] simple Galilean Scope
  • From: Bill <astronutski@yahoo.com>
• Re: [ATM] Conic section manufacturing
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] Aluminizing
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Flex Mirror Tension
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] re: heating glass
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Forced Ventilation
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] dew heater ..Resistive Paint
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] dew heater ..Resistive Paint
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Cassegrain Secondary figuring and Star Test Interpretation
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Batterson address change
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] bending square aluminium tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: ATM Digest, Vol 13, Issue 7
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] bending square aluminium tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in the mirror: theresults...(long)
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: ATM Digest, Vol 13, Issue 8
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] bending square aluminium tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] bending square aluminium tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in themirror:theresults...(long)
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Mirrors
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Mirrors
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] considering different design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Mirrors
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] considering different design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] considering different design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Amature Telescope Maker's Repeat
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Round Robin Mirror C images posted
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Spot diagrams and aberrations
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Round Robin Mirror C images reduced in size
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] 3 Inch Off Axis Schmidt Camera?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Spot diagrams and aberrations
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] 3 Inch Off Axis Schmidt Camera?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Blank question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Blank question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Hyperbola and TDE - Tenacious
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] fun with a lathe
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Blank question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Blank question
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] A new page on spherometer construction.
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Re: [atm_free] Re: A new page on spherometer construction.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Chromatic effects visibility
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Chromatic effects visibility
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Chromatic effects visibility
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] secondary support holes
  • From: brianb@u.washington.edu
• [ATM] Flex Mirror Tension
  • From: Bryan Stiles <bryan.stiles@gmail.com>
• RE: [ATM] bending square aluminium tube
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• RE: [ATM] RE: glass heating
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] Mirrors
  • From: "Chris Collins" <ccollins59@hotmail.com>
• Re: [ATM] Batterson address change
  • From: Chuck Taylor <chucktaylor@speakeasy.net>
• [ATM] Conic section manufacturing
  • From: Chuck Taylor <chucktaylor@speakeasy.net>
• Re: [ATM] bending square aluminium tube
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] bending square aluminium tube
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Mirror Round Robin and some in-house test results
  • From: Dale Eason <atmpob@yahoo.com>
• RE: [ATM] Mirror Round Robin and some in-house test results
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Foucault multi diameter and Interferometry profile comparison
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Round robin mirror C Foucault profiles
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Round Robin Mirror C images posted
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Round Robin C interferometry and robo analysis
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Round Robin C Foucault profiles compared to Interferometry
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Round Robin Mirror C images reduced in size
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Re: Robo V Interferometry, Revisited
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Forced Ventilation
  • From: "Dan Wray" <dwray@wideopenwest.com>
• Re: [ATM] Blank question
  • From: Daniel Fundo <fundo@bellsouth.net>
• [ATM] virtual counterbalance question
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] RE: glass heating
  • From: "David M. Bourgeois" <dbourgeo@thezone.net>
• [ATM] Laminating Dibond
  • From: "deepsky4565@comcast.net" <dan@runway.net>
• Re: [ATM] considering different design
  • From: DHA352@aol.com
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Mirror Cells - types, (dis)advantages,about flotation and PLOP
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Mirror Cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Mirror Cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Bowed Flexure
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Bowed Flexure
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Bowed Flexure
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Alt/Az goto scope, lateral shift when moving up/down
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Alt/Az goto scope, lateral shift when moving up/down
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Illuminated Field - How Much?
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Meade 'Fesses up
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Forced Ventilation
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] better quality polish
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] better quality polish
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] better quality polish
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Forced Ventilation
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Forced Ventilation
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Re: ATM Digest, Vol 13, Issue 8
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Don Ware" <mimas@charter.net>
• RE: [ATM] Paul-Baker, Gregorian variety
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Mirror Cells - types, (dis)advantages,about flotation and PLOP
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] parabolic versus spherical volume of glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] parabolic versus spherical volume of glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] parabolic versus spherical volume of glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Arc Roller: was bending aluminum
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] parabolic versus spherical volume of glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] considering different design
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Re: considering new design FW: Re: website down
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Loveday alternative to Cassegrain
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] Spot diagrams and aberrations
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] re: heating glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] re: heating glass
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] Forced Ventilation
  • From: "Doug Williams" <salguod@minbaritm.com>
• RE: [ATM] Forced Ventilation
  • From: "Doug Williams" <salguod@minbaritm.com>
• RE: [ATM] Forced Ventilation
  • From: "Doug Williams" <salguod@minbaritm.com>
• [ATM] Re: Flex mirror tension
  • From: "Douglas Arion" <darion@carthage.edu>
• [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: Douglas S Angle <Douglas.S.Angle@can.dupont.com>
• Re: [ATM] Mirror Cells
  • From: ecairns <ecairns@mcmaster.ca>
• RE: [ATM] Bowed Flexure
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re:pivots for mirror cells
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re: annealing Pyrex
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re: heating glass
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• Re: [ATM] considering different design
  • From: Fabio Pettinati <fabio@voreas.com>
• Re: [ATM] simple Galilean Scope
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] dew heater circuit questions-MORE Q's
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] dew heater ..Resistive Paint
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] considering different design
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] Re: considering new design FW: Re: website down
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] 3 Inch Off Axis Schmidt Camera?
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] Ceravolo interferometer
  • From: "Gianluca Carinci" <g.carinci@tiscalinet.it>
• [ATM] OT: excuse me: I've sent a private message to the List (myfault)
  • From: "Gianluca Carinci" <g.carinci@tiscalinet.it>
• Re: [ATM] Re: ATM Digest, Vol 13, Issue 8
  • From: Gilbert Gagne <gil5941@earthlink.net>
• RE: [ATM] New Meade telescopes in March '05 Sky and Telescope
  • From: "Gregg Swanson" <gswanson@microsoft.com>
• RE: [ATM] RE: glass heating
  • From: "Gregg Swanson" <gswanson@microsoft.com>
• [ATM] parabolic versus spherical volume of glass
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Mirrors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] Dry Polishing?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Lurie-Houghton (was) : Schmidt-Cassegrain
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] fun with a lathe
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Blank question
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Blank question
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] first light
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] first light for real
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Amature Telescope Maker's Repeat
  • From: hermit@outofoptions.org
• Re: [ATM] dew heater circuit questions
  • From: hermit@outofoptions.org
• Re: [ATM] Smooth Polish
  • From: hermit@outofoptions.org
• Re: [ATM] Yeager lens Query again
  • From: hermit@outofoptions.org
• [ATM] Yeager lens Query again
  • From: "Ian McKernan" <I.Mckernan@murdoch.edu.au>
• [ATM] Re: bending square aluminium tube
  • From: IAPDK@ADMIN.DRAKE.EDU
• [ATM] Re: bending square aluminium tube (oops)
  • From: IAPDK@ADMIN.DRAKE.EDU
• [ATM] Re: Small mirror cells, Pivot bolt or spring loaded bolts?
  • From: IAPDK@ADMIN.DRAKE.EDU
• [ATM] How to get "b" and surface figure from Texereau style datapoints???
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Re: How to get "b" and surface figure from Texereau styledata points???
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Hyperbola and TDE - Tenacious
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Re: Hyperbola and TDE - Tenacious
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Re: Hyperbola and TDE - Tenacious
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Re: Re: Re: Hyperbola and TDE - Tenacious
  • From: J Killea <jkillea@yahoo.com>
• Re: Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: J Killea <jkillea@yahoo.com>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Some questions on Tex versus Sixtests - Hoping I'm done!
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Re: Re: Re: Hyperbola and TDE - Tenacious (Mike Lockwood)
  • From: J Killea <jkillea@yahoo.com>
• Re: [ATM] dew heater ..Resistive Paint
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] A little scope for my Dad :)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] Mirror Round Robin and some in-house test results
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] A little scope for my Dad :)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [atm_free] RE: [ATM] Mirror Round Robin and some in-house testresults
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] Lerch's Robo Foucault VS. Interferometry, revisited
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] bending square aluminium tube
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] bending square aluminium tube
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] bending square aluminium tube
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] bending square aluminium tube
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Alt/Az goto scope, lateral shift when moving up/down
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Re:Building a Mirror Cell
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] considering different design
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Aero Ektar Coma Corrector?
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] eyepiece changes and balance problems
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] shrouds, baffles, and tubes
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] spherical mirrors
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• Re: [ATM] Schmidt Cassegrain
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] Schmidt Cassegrain
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] Schmidt Cassegrain
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] Re: Schmidt-Cassegrain
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] Re: Schmidt-Cassegrain
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• [ATM] Illuminated Field - How Much?
  • From: Jeff Morgan <jeffmorgan@mindspring.com>
• Re: [ATM] Illuminated Field - How Much?
  • From: Jeff Morgan <jeffmorgan@mindspring.com>
• [ATM] Re: Illumination Field-Another consideration
  • From: Jeff Morgan <jeffmorgan@mindspring.com>
• Re: [ATM] considering different design
  • From: jeffmorgan@mindspring.com
• Re: [ATM] considering different design
  • From: jeffmorgan@mindspring.com
• Re: [ATM] considering different design
  • From: jeffmorgan@mindspring.com
• Re: [ATM] considering different design
  • From: jeffmorgan@mindspring.com
• Re: [ATM] Forced Ventilation
  • From: jeffmorgan@mindspring.com
• [ATM] Small mirror cells, Pivot bolt or spring loaded bolts?
  • From: "Jeremiah J. Burton" <tylosaurus@gmail.com>
• [ATM] Batterson address change
  • From: "Jeremy Batterson" <jdbaterson@msn.com>
• [ATM] Spherical F1-2 Correction for Parabalization
  • From: "Jeremy Batterson" <jdbaterson@msn.com>
• [ATM] Dry Polishing?
  • From: "Jeremy Batterson" <jdbaterson@msn.com>
• Re: [ATM] Dry Polishing?
  • From: "Jeremy Batterson" <jdbaterson@msn.com>
• [ATM] Blank question
  • From: "Jeremy Batterson" <jdbaterson@msn.com>
• Re: [ATM] Blank question
  • From: "Jeremy Batterson" <jdbaterson@msn.com>
• RE: [ATM] Re: considering new design FW: Re: website down
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Mirrors
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Blank question
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• RE: [ATM] dew heater ..Resistive Paint
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] machine generated zones
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] parabolic versus spherical volume of glass
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] RE: Stabilizing plate glass
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] considering different design
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Mirrors
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] considering different design
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] RE: glass heating
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] RE: glass heating
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] RE: glass heating
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Temperature-changes
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] Foucault multi diameter and Interferometry profilecomparison
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Foucault and diffraction
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] Exact Conic Fit.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Sphereical mirror
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Hyperbola and TDE - Tenacious
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] Re: Hyperbola and TDE - Tenacious
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Some questions on Tex versus Sixtests - Hoping I'm done!
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Illuminated Field - How Much?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: [ATM] New Meade telescopes in March '05 Sky and Telescope
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] Counterweight system advice
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] Halpha filters
  • From: John Lynch <john_lynch2005@yahoo.com>
• Re: [ATM] Meade 'Fesses up
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] simple Galilean Scope
  • From: jsgrmfg@gracemfg.com
• [ATM] RE: Stabilizing plate glass
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• RE: [ATM] RE: Stabilizing plate glass
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• RE: [ATM] RE: Stabilizing plate glass
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• RE: [ATM] Optical flats
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: Annealing Pyrex
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] Alt/Az goto scope, lateral shift when moving up/down
  • From: Justin Modra <nitrohepcat@yahoo.com>
• Re: [ATM] dew heater circuit questions
  • From: Justin Modra <nitrohepcat@yahoo.com>
• [ATM] Re: Fresnel lenses
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] RE: Stabilizing plate glass
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Mirrors
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: considering new design FW: Re: website down
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] secondary support holes
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] dew heater ..Resistive Paint
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] RE: Stabilizing plate glass
  • From: Ken Lowther <hermit@outofoptions.org>
• [ATM] bending rods
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Conic section manufacturing
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] re: heating glass
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] secondary support holes
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Anyone still maintaining PLOP?
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Forced Ventilation
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] 20" Mirror
  • From: "Ken Reid" <ken_reid@telus.net>
• RE: [ATM] Round robin mirror C Foucault profiles
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Foucault and diffraction
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Foucault and diffraction
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• [ATM] updated mirror C comparison
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Round Robin Mirror C images reduced in size
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• [ATM] Polishing simulation
  • From: <lenses@adelphia.net>
• Re: your unsubscribe request
  • From: "Lyris List Manager" <lyris@hermes.shore.net>
• [ATM] Cassegrain Secondary figuring and Star Test Interpretation
  • From: "M/S Heald" <maheald@octa4.net.au>
• [ATM] 3 Inch Off Axis Schmidt Camera?
  • From: "M/S Heald" <maheald@octa4.net.au>
• [ATM] Aero Ektar Coma Correector?
  • From: "M/S Heald" <maheald@octa4.net.au>
• [ATM] Re: Aero Ektar Coma Corrector?
  • From: "M/S Heald" <maheald@octa4.net.au>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] dew heater ..Resistive Paint
  • From: "Malcolm Macdonald" <toliman@wave.co.nz>
• [ATM] Re Building a Mirror cellRe:
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Mirrors
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] considering different design
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] considering different design
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Conic section manufacturing
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Aluminizing
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Laminating Dibond
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] simple Galilean Scope
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Smooth Polish
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 3 Inch Off Axis Schmidt Camera?
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Blank question
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Picture in Mark Holm's Sky and Telescope article
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] New Meade telescopes in March '05 Sky and Telescope
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Illuminated Field - How Much?
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Temperature-changes
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Illuminated Field - How Much?
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Re: ATM Digest, Vol 13, Issue 8
  • From: martin.cibulski@t-online.de
• [ATM] Alt/Az goto scope, lateral shift when moving up/down
  • From: martin.cibulski@t-online.de
• Re: [ATM] dew heater ..Resistive Paint
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] bending square aluminium tube
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Bowed Flexure
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] bending square aluminium tube
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] bending square aluminium tube
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient in themirror :theresults...(long)
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: "matt" <mariusrf@bellsouth.net>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• RE: [ATM] RE: glass heating
  • From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
• Re: [ATM] A new page on spherometer construction.
  • From: "mconsidine@netreach.net" <mconsidine@netreach.net>
• Re: [ATM] Mirror Cells
  • From: mdholm@telerama.com
• [ATM] Re: Fresnel lenses and correcting spherical abberation bycomputer.
  • From: mdholm@telerama.com
• Re: [ATM] Batterson address change
  • From: mdholm@telerama.com
• [ATM] Re: Fresnel lenses and correcting spherical abberation bycomputer.
  • From: mdholm@telerama.com
• Re: [ATM] considering different design
  • From: mdholm@telerama.com
• [ATM] RE: Annealing Pyrex
  • From: mdholm@telerama.com
• [ATM] Re:Building a Mirror Cell
  • From: mdholm@telerama.com
• RE: [ATM] Re: considering new design
  • From: mdholm@telerama.com
• Re: [ATM] Mirror Cells - types, (dis)advantages,about flotation and PLOP
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Foucault and diffraction
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] glass heating
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Meade 'Fesses up
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] bending rods
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] dew heater circuit questions
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Schmidt Cassegrain
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Schmidt Cassegrain
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Foucault multi diameter and Interferometry profilecomparison
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Mirror Round Robin and some in-house test results
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Foucault and diffraction
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] New Meade telescopes in March '05 Sky and Telescope
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Chromatic effects visibility
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Meade 'Fesses up
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Meade 'Fesses up
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Meade 'Fesses up
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Chromatic effects visibility
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] AtmosFringe Demo
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] considering different design
  • From: "mike collins" <mike0collins@hotmail.com>
• [ATM] Re: considering new design FW: Re: website down
  • From: "mike collins" <mike0collins@hotmail.com>
• [ATM] Re: Stabilizing plate glass
  • From: "Mike Conran" <mike@guidesys.com>
• Re: [ATM] Aluminizing
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Jay's TDE - Tenacious
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Re: Hyperbola and TDE - Tenacious
  • From: Mike Lockwood <melockwo@uiuc.edu>
• RE: [ATM] Blank question
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• Re: [ATM] shrouds, baffles, and tubes
  • From: NGC704@aol.com
• Re: [ATM] 40" mirror
  • From: NGC704@aol.com
• Re: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] RE: Laminating Diebond
  • From: "nunya" <ntent@pctcnet.net>
• [ATM] Playing with astatic mirror cell idea (14in f/5)
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• [ATM] Graphical PLOP - parsing bug in Material tab
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• [ATM] Anyone still maintaining PLOP?
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• [ATM] Some advice on 18pt cell design
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• RE: [ATM] Mirror Cells
  • From: "Peter" <peter@kitgear.com>
• [ATM] Smooth Polish
  • From: "Peter" <peter@kitgear.com>
• [ATM] RE: [atm_free] Re: Smooth Polish
  • From: "Peter" <peter@kitgear.com>
• [ATM] Low Mass / High Stiffness Materials
  • From: "Peter" <peter@kitgear.com>
• [ATM] robotic telescopes
  • From: Peter Abrahams <telscope@europa.com>
• RE: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Ric Rokosz <radicell2@yahoo.com>
• [ATM] Chromatic effects visibility
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Chromatic effects visibility
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Low Mass / High Stiffness Materials
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Chromatic effects visibility
  • From: Richard <cnc@cncservo.co.uk>
• Re[4]: [ATM] Chromatic effects visibility
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Hamiltonian Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Hamiltonian Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Foucault and diffraction
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Backup thoughts
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] I Hate Fudge (was Backup Thoughts)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Aero Ektar Coma Correector?
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Meade 'Fesses up
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Chromatic effects visibility
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• RE: [ATM] bending square aluminium tube
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] Counterweight system advice
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] Counterweight system advice
  • From: "Richard Klappal" <klappal@xnet.com>
• Re: [ATM] bending square aluminium tube
  • From: Richard Ozer <rozer@pacbell.net>
• Re: [ATM] simple Galilean Scope
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Aluminizing
  • From: "Richard Schwartz" <richas@earthlink.net>
• RE: [ATM] I Hate Fudge (was Backup Thoughts)
  • From: "Richard Schwartz" <richas@earthlink.net>
• RE: [ATM] RE: glass heating
  • From: richas@earthlink.net
• Re: [ATM] Mirrors
  • From: Rick M <starman_962@yahoo.ca>
• Re: [ATM] Forced Ventilation
  • From: Rick M <starman_962@yahoo.ca>
• [ATM] Re: Amateur
  • From: "Rory Blake" <rory123@bellsouth.net>
• [ATM] ATM: Converting Schmidt camera to CCD
  • From: "Rory Blake" <rory123@bellsouth.net>
• Re: [ATM] Temperature-changes
  • From: Ross Sackett <rsackett00@yahoo.com>
• RE: [ATM] Temperature-changes
  • From: Ross Sackett <rsackett00@yahoo.com>
• RE: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Royston_Jeremy@emc.com
• [ATM] Amature Telescope Maker's Repeat
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Amature Telescope Maker's Repeat
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Sphereical mirror
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: [ATM] Blank question
  • From: scott <srychnov@chem.ps.uci.edu>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Aluminizing
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Aluminizing
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Illuminated Field - How Much?
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• RE: [ATM] Paul-Baker, Gregorian variety
  • From: "Scott Milligan" <starzkey@charter.net>
• RE: [ATM] Mirror Round Robin and some in-house test results
  • From: "Scott Milligan" <starzkey@charter.net>
• RE: [ATM] Astigmatism in round robin mirror C with Foucault.
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] machine generated zones
  • From: steve beccue <lsteve@Beccue.com>
• Re: [ATM] spherical mirrors
  • From: "Steven L. Dodds" <steve@pcmw.net>
• Re: [ATM] spherical mirrors
  • From: "Steven L. Dodds" <steve@pcmw.net>
• Re: [ATM] bending square aluminium tube
  • From: "Stuart Hutchins" <stuart452@earthlink.net>
• [ATM] Perseids
  • From: "The Alarm Co." <tac@i1.net>
• RE: [ATM] Re: Casting Pyrex Mirror Blanks
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] dew heater ..Resistive Paint
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Dry Polishing?
  • From: "Thomas" <tomjan@ozemail.com.au>
• [ATM] WAY OT: need some translation done.
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Blank question
  • From: "Thomas" <tomjan@ozemail.com.au>
• [ATM] Re: ATM Digest, Vol 13, Issue 6
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• [ATM] Re: Astronomer's dream-come true?
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• Re: [ATM] simple Galilean Scope
  • From: Tim Hager <thager6164@earthlink.net>
• RE: [ATM] Re: bending square aluminium tube
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• RE: [ATM] bending square aluminium tube
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• RE: [ATM] bending square aluminium tube
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• [ATM] Temperature-changes
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• [ATM] Re :Best webcam/ccd for Foucaultgrams?
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re Building a Mirror cell
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re:Building a Mirror Cell
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] Re:Building a Mirror Cell
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re: Your Couder mask - you could be happy without it:Auotmatic Focault Testing
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re: Schmidt-Cassegrain
  • From: vlad@copper.net
• Re: [ATM] dew heater ..Resistive Paint
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Spherical F1-2 Correction for Parabalization
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in the mirror:theresults...(long)
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] How to get "b" and surface figure from Texereau styledatapoints???
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Playing with astatic mirror cell idea (14in f/5)
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] New Meade telescopes in March '05 Sky and Telescope
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] RE: glass heating
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] RE: glass heating
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] RE: glass heating
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Re: Your Couder mask - you could be happy withoutit:Auotmatic Focault Testing
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• [ATM] Re: Robo V Interferometry, Revisited
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Paul-Baker, Gregorian variety
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Paul-Baker, Gregorian variety
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Paul-Baker, Gregorian variety
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused by thermal gradient in the mirror: theresults...(long)
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient in themirror :theresults...(long)
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient in themirror :theresults...(long)
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Ball bearing for triangles,spherical aberration caused bythermal gradient inthemirror :theresults...(long)
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] considering different design
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Schmidt Cassegrain
  • From: "vladimir sacek" <v959@msn.com>
• Re: [ATM] Lurie-Houghton (was) : Schmidt-Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Re: Schmidt-Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Re: Schmidt-Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Aplanatic Schmidt-Cassegrains with aspherical mirrors
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Foucault and diffraction
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Loveday alternative to Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Foucault and diffraction
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Foucault and diffraction
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Spherical mirror
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Spherical mirror
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Meade 'Fesses up
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Meade 'Fesses up
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Meade 'Fesses up
  • From: "vladimir sacek" <vlad@copper.net>
• Re: Re[2]: [ATM] Chromatic effects visibility
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Re: ATM Digest, Vol 13, Issue 7
  • From: vorblesnak@peak.org
• [ATM] Arc Roller: was bending aluminum
  • From: vorblesnak@peak.org
• [ATM] Dry Polishing .. Long
  • From: vorblesnak@peak.org
• [ATM] considering different design
  • From: vorblesnak@peak.org
• [ATM] RE: glass heating
  • From: vorblesnak@peak.org
• [ATM] AtmosFringe Demo
  • From: "Wolfgang Rohr" <Wolfgang.Rohr@t-online.de>
• Re: [ATM] Batterson address change
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] parabolic versus spherical volume of glass
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Re: considering new design FW: Re: website down
  • From: Woodchuck <djv@bedford.net>
• RE: [ATM] Re: considering new design FW: Re: website down
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Re: Amateur
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Loveday alternative to Cassegrain
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Blank question
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Re: Aero Ektar Coma Corrector?
  • From: Woodchuck <djv@bedford.net>