Amateur Telescope Makers (ATM) Archive for JAN04 - by thread
- .Give. her "all-niters" every nite !,
Vicki Coulter
- [ATM] (no subject),
mdholm@telerama.com
- [ATM] 25" f/5 folded newtonian,
polaraligned
- [ATM] A question about angular size at a distance.,
PK
- [ATM] anyone on the new list yet?,
Jim Miller
- [ATM] Archive on CD,
Dan Croskrey
- [ATM] ATM Grit Sequence for 8" Mirror,
Satish K. Pagare
- [ATM] ATM List2 is Alive,
J&S
- [ATM] ATM presentation,
Michael Lindner
- [ATM] ATM RE: A question about angular size at a distance,
J&S
- [ATM] ATM: FringeXP comparison to professional software,
Ric Rokosz
- [ATM] ATM: Interferometer - images of odd fringes,
Ric Rokosz
- [ATM] Awsome!!!!!,
c f
- [ATM] Binocular Telescope,
Ian McKernan
- [ATM] Calculating Focuser Length and Travel,
Al Audet
- [ATM] Carbon Truss Alternative,
Marco Miglionico
- [ATM] checking in,
Ina Ron Lippard Renaissance Reproductions
- [ATM] Classical Cassegrain Design Tradeoff Help Needed,
Gerald Boutin
- [ATM] countdown,
Ken Lowther
- [ATM] Digest is working,
Mark Holm
- [ATM] Ending notes of old list,
Tom Moulton
- [ATM] First optical components coated in new 25" box coater :),
James Lerch
- [ATM] First Project Started...,
Satish K. Pagare
- [ATM] Fw: ATM bearings, part II,
PK
- [ATM] Help with Mirror,
Robert Turner
- [ATM] Interferometer Fringe Contrast From Coated Mirrors,
Don
- [ATM] List bounces - an apology,
simeon ivanov
- [ATM] long analysis of my Torus mirror,
Stephen C. Koehler
- [ATM] looking for two men,
Ina Ron Lippard Renaissance Reproductions
- FW: [ATM] make ronchi grating,
mlbrown@everstrive.com
- [ATM] More Beginner Woes,
Robert Turner
- [ATM] new list,
Stephen C. Koehler
- [ATM] New virus - be prepared (semi-OT),
David Nicholls
- [ATM] No windows, no virus, no worry,
Dominic-Luc Webb
- [ATM] OT: Mailbox Filter test....Don't read,
Samuel DiRocco
- [ATM] plywood question,
Ina Ron Lippard Renaissance Reproductions
- [ATM] Polishing--comments appreciated,
Rodney Mayes
- [ATM] RE: Test,
Russell Jocoy
- [ATM] RE: A question about angular size at a distance,
Tom Krajci
- [ATM] Re: ATM Melting pitch,
jsgrmfg@gracemfg.com
- Fwd: Re: [ATM] Re: ATM pitch mold, opinions needed,
Ken Lowther
- [ATM] Re: ATM Softening pitch - heritical thoughts,
jsgrmfg@gracemfg.com
- [ATM] Re: ATM Spectroscopy and fiber optic info needed,
jsgrmfg@gracemfg.com
- [ATM] Re: ATM Tangent arm drive,
J&S
- [ATM] Re: Posting rejected,
Michael Lindner
- [ATM] RE: Re: Sub-Diameter Lap?,
Tom Krajci
- [ATM] Re: Sub-Diameter Lap?,
tkrajci@san.osd.mil
- [ATM] ronchi grate printed!!!,
c f
- [ATM] ronchi grating,
c f
- [ATM] Rouge,
Jerry
- FW: [ATM] Spectroscopy and fiber optic info needed,
mlbrown@everstrive.com
- [ATM] subscribing to new list,
Leftfieldstar@aol.com
- [ATM] subscribing to the new list,
Leftfieldstar@aol.com
- [ATM] telescope plans,
Ina Ron Lippard Renaissance Reproductions
- [ATM] test,
Bill Kelley
- [ATM] test, no content,
Leftfieldstar@aol.com
- [ATM] Testing,
Vladimir Galogaza
- [ATM] viruses,
Ken Lowther
- [ATM] Welcome,
Michael Lindner
- [ATM] what did I do wrong???,
c f
- ATM A question about angular size at a distance,
PK
- ATM "Perfect" Tri-Schiefspiegler in OSLO,
Mauritz Andersson
- ATM 1/4 Micron,
Art
- ATM 24" vacuum chamber is getting closer :),
James Lerch
- ATM a quck pic of the staining discussed earlier,
Michael Conron
- Re: ATM A question about angular size at a distance,
tkrajci
- ATM Aluminim Primers,
Keith Taylor
- ATM Aluminizing: 1000 Watt dimmer circuit link,
Dominic-Luc Webb
- ATM atm,
stipe vladova
- ATM atm class on Friday - machine & flats,
gfbranden@earthlink.net
- RE: ATM atmsite mirror,
Good, Donald
- ATM bang zoom,
Ina Ron Lippard Renaissance Reproductions
- ATM Bath interferometer,
"Uwe Süßenberger"
- ATM bearings,
Bob Walker
- ATM bearings, part II,
Kreig McBride
- ATM Bryers Gear?,
Mike Spacedude40
- ATM building a GEM,
Ina Ron Lippard Renaissance Reproductions
- ATM Building Plans for a super-cheap educational scope,
Torquil MacCorkle, III
- ATM Bullseye during polishing--comments appreciated,
Rodney Mayes
- ATM Canon A70 digital camera lash up.,
Marco Miglionico
- ATM Carbon Truss Alternative,
Marco Miglionico
- ATM chasing pits??,
c f
- ATM Date: Mon, 19 Jan 2004 15:34:42 -0700,
HARLICK, MICHEAL
- ATM directions,
Ina Ron Lippard Renaissance Reproductions
- ATM End of the list countdown,
Ken Lowther
- ATM Ever wanted to study at MIT??,
Thomas
- ATM Figure Center Too Deep,
Robert Turner
- ATM Finishing a Hastings Tube???,
pbunn
- ATM Foucault software,
Gordon Tulloch
- ATM foucault tester built,
c f
- Re: ATM Foucault tester light source....,
Bob May
- ATM Fwd: bang zoom:in perspective,
Ina Ron Lippard Renaissance Reproductions
- Re: ATM gears and such,
Dave Gault
- ATM glass,
stipe vladova
- <Possible follow-up(s)>
- ATM glass,
stipe vladova
- ATM Glue for teflon,
hermit
- Re: ATM Glue for teflon: Cola,
Kevin Whitefire
- ATM Going price for an 8" plate glass blank,
gfbranden@earthlink.net
- ATM gorica,
stipe vladova
- ATM gorica staklo,
stipe vladova
- ATM Grinding area cleanliness,
mlbrown@everstrive.com
- ATM Happy holidays,
Scott Berfield
- Re: ATM Hi (This is the work of the Beagle worm),
mdholm
- ATM Hi friends,
RAJA KUMAR
- ATM Home observatory advice requested,
John D. Gallagher
- ATM hot glue for mirrors?,
gfbranden@earthlink.net
- ATM Important Message from List Owner - Please Read!!!,
Michael Lindner
- ATM List moving on 2/5/04,
Mr Michael Lindner
- ATM list worm virus.,
Joe Campbell
- ATM Looking for 8" f/4 mirror,
Joseph Colosi
- ATM Melting pitch,
mlbrown@everstrive.com
- ATM Metal to metal,
Clive
- ATM Microcontroller based scope driver III - More memory,
Martin Cibulski
- Re: ATM Microcontroller based telescope driver III,
gjnelson
- ATM Microcontroller based telescope driver III - More Memory,
Martin Cibulski
- ATM mirror fixing,
stipe vladova
- ATM Mirror Blank Imperfect Circle...,
Satish K. Pagare
- ATM mirrors,
stipe vladova
- ATM more on mounts,
Ina Ron Lippard Renaissance Reproductions
- Re: ATM Newbie with a problem (flat spot on tool),
Bob May
- RE: ATM OT - Virus disclaimer,
Stanley A. Schultz
- ATM Overrcorrected Mirror,
Robert Turner
- ATM pads,
stipe vladova
- ATM pitch lap woes--help appreciated,
Rodney Mayes
- Re: ATM pitch lap woes--help appreciated,
Bob May
- Re: ATM pitch lap woes--help appreciated,
Rodney Mayes
- Re: ATM pitch lap woes--help appreciated,
Bob May
- Re: ATM pitch lap woes--help appreciated,
hermit
- Re: ATM pitch lap woes--help appreciated,
Bob May
- Re: ATM pitch lap woes--help appreciated,
Woodchuck
- ATM surface accuracy,
ab Price
- ATM Re: surface accuracy,
Bob May
- Re: ATM pitch lap woes--help appreciated,
Tom Stokes
- Re: ATM pitch lap woes--help appreciated,
Bob May
- Re: ATM pitch lap woes--help appreciated,
Dale Eason
- Re: ATM pitch lap woes--help appreciated,
Bob May
- Re: ATM pitch lap woes--help appreciated,
Tom Stokes
- <Possible follow-up(s)>
- Fwd: ATM pitch lap woes--help appreciated,
Matthew L. Brown
- RE: ATM Pitch Laps,
Russell Jocoy
- ATM pitch mold, opinions needed,
c f
- [ATM] Re: ATM pitch mold, opinions needed,
gjnelson@absamail.co.za
- Re: ATM pitch mold, opinions needed,
Kevin Whitefire
- <Possible follow-up(s)>
- Re: ATM pitch mold, opinions needed,
Hugues.Laroche
- Re: ATM pitch mold, opinions needed,
c f
- Re: ATM pitch mold, opinions needed,
tkrajci
- RE: ATM pitch mold, opinions needed,
Scott Berfield
- Re: ATM pitch mold, opinions needed,
Richard Schwartz
- Re: ATM pitch mold, opinions needed,
tkrajci
- ATM polishing,
Darryl Wilson
- ATM polishing help needed,
Old Salt Fish
- ATM Polishing, facets, and bullseye,
Rodney Mayes
- ATM possible aurora? (OT),
David Nicholls
- ATM Pre-polish with HCF,
Matheus Jatkoske Lazo
- ATM Printing an ellipse (-> secondary mirrors),
Hugues.Laroche
- ATM re-subscribing,
Ina Ron Lippard Renaissance Reproductions
- ATM Re: [atm_free] Stubborn 1/2 " edge zone,
Bob May
- ATM RE: Abour Mirror...,
Arun Sahasrabuddhe
- ATM RE: atm-digest V1 #3693,
Adam Strachan-Stephens
- ATM Re: Experiential versus Emperical cage height minimum,
tkrajci
- ATM Re: mirrors,
tkrajci
- Re: ATM Re: surface accuracy,
Bob May
- ATM Re: Test stand setup for 30",
Michael Conron
- ATM re: unsubbing,
issam mansour
- ATM roughness,
stipe vladova
- ATM rounding the edge,
Ina Ron Lippard Renaissance Reproductions
- Re: ATM Schiefspieglers in Oslo LT,
Good, Donald
- RE: ATM Schiefspieglers in Oslo LT - Error correction,
Good, Donald
- ATM Scopemobile GT?,
Richard F.L.R. Snashall
- ATM Separating tool and mirror at fine grits,
Shane Scott
- ATM Softening pitch,
Art
- Re: ATM Softening pitch - heritical thoughts,
Richard Schwartz
- ATM Speculum Blank No. 5,
Anthony Stillman
- ATM Spring outing,
Ina Ron Lippard Renaissance Reproductions
- ATM stained mirror edge and water delivery system,
Michael Conron
- ATM Star test,
Art
- ATM Stripped Down eyepiece,
Marco Miglionico
- ATM Sub-Diameter Lap?,
Ray@J-Engineering.com
- Re: ATM surface accuracy,
Hugues.Laroche
- ATM Tangent arm drive,
Scott Ewart
- ATM telescope making books,
stipe vladova
- RE:ATM telescope making books,
tkrajci
- ATM temperature considerations--Gugolz 64,
Rodney Mayes
- ATM tested today at lunch!,
c f
- ATM toy of the future,
Ina Ron Lippard Renaissance Reproductions
- ATM Toy-Scope,
IAPDK
- ATM trepanning diagonal,
Jerry B. Hillman
- Re: ATM Triplet Prescription,
Richard F.L.R. Snashall
- ATM Turcite X,
Don Clement
- ATM Virus in majordomo??? (was: Majordomo results: Hi),
Hugues.Laroche
- ATM what did I do wrong part 2,
c f
- ATM what did I do wrong????,
c f
- ATM What thread is it?,
Hugues.Laroche
- Re: ATM where can I purchase a 12.5" f/20 mirror,
J. Christopher Westland
- ATM Zeiss E-type lens,
Matheus Jatkoske Lazo
- RE: ATM- Camera Disasters,
Good, Donald
- ATM: Large mirror rotation on turntable to limit astigmatisn,
Michael Conron
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA,
Mail System Internal Data
- Live again feel fantastic!-quill,
Nestor Proctor
- No Subject,
mdholm
- OT: ATM Blackhole listed,
Jim Miller
- Re: OT: ATM Blackhole listed and SPAM,
Hugues.Laroche
Mail converted by MHonArc 2.4.7