[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM gears and such

To: ATM <atm@shore.net>
Subject: Re: ATM gears and such
From: Dave Gault <daveg@tpg.com.au>
Date: Thu, 15 Jan 2004 19:17:57 +1100
Organization: Almec
References: <4005F350.E067D5F2@bigpond.com>
Reply-To: Dave Gault <daveg@tpg.com.au>
Sender: owner-atm@shore.net

G'day all,

pjifl@bigpond.com.au wrote:

<snip>
>They would cut a little cleaner than a tap because they have
>proper clearance behind the cutting edge.  But ground thread
>helical taps do work quite well.

I have a webpage on the cutting of my worm wheels using the old "tap in
the chuck and plunge the plank in method".

my url is onder my sig and just nav. to the "German Equatorial Mount -
Part 1. The Drives" page

--
Regards
Dave
http://www4.tpgi.com.au/users/daveg/index.html

Follow-Ups:
- RE: ATM gears and such
  - From: "Peter" <peter@kitgear.com>

Prev by Author: ATM polishing
Next by Author: Re: ATM gears and such
Prev by thread: ATM Fwd: bang zoom:in perspective
Next by thread: RE: ATM gears and such
Index(es):
- Author
- Thread