Amateur Telescope Makers (ATM) Archive for JAN04 - by author

• Thread Index

• ATM Bath interferometer
  • From: u.suessenberger@t-online.de ("Uwe Süßenberger")
• ATM surface accuracy
  • From: ab Price <hellowab@yahoo.com>
• [ATM] First Project Started...
  • From: "Satish K. Pagare" <asatsi@yahoo.com>
• ATM Mirror Blank Imperfect Circle...
  • From: "Satish K. Pagare" <asatsi@yahoo.com>
• ATM Cement tool....
  • From: "Satish K. Pagare" <asatsi@yahoo.com>
• Re: OT: ATM Blackhole listed and SPAM
  • From: "Satish K. Pagare" <asatsi@yahoo.com>
• [ATM] ATM Grit Sequence for 8" Mirror
  • From: asatsi at yahoo.com (Satish K. Pagare)
• ATM RE: atm-digest V1 #3693
  • From: "Adam Strachan-Stephens" <adamATstrachan-stephens.com>
• [ATM] Calculating Focuser Length and Travel
  • From: alaudet at timminsastronomy.com (Al Audet)
• [ATM] Calculating Focuser Length and Travel
  • From: alaudet at timminsastronomy.com (Al Audet)
• [ATM] ATM Grit Sequence for 8" Mirror
  • From: adfernandez at adinet.com.uy (Alejandro Fernandez)
• Re: ATM Softening pitch
  • From: Anthony Stillman <atmer@flash.net>
• ATM Speculum Blank No. 5
  • From: Anthony Stillman <atmer@flash.net>
• [ATM] ATM: FringeXP comparison to professional software
  • From: Aplanatic at aol.com (Aplanatic@aol.com)
• ATM Softening pitch
  • From: "Art" <mock47@accessbee.com>
• ATM 1/4 Micron
  • From: "Art" <mock47@accessbee.com>
• ATM Star test
  • From: "Art" <mock47@accessbee.com>
• [ATM] subscribing to new list
  • From: mock47 at accessbee.com (Art)
• ATM RE: Abour Mirror...
  • From: "Arun Sahasrabuddhe" <balusas@hotmail.com>
• Re: OT: ATM Blackhole listed
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: [ATM] Re: ATM tested today at lunch!
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• [ATM] test
  • From: flex at commspeed.net (Bill Kelley)
• Re: ATM Newbie with a problem (flat spot on tool)
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault tester light source....
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM polishing
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch lap woes--help appreciated
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Mirror Blank Imperfect Circle...
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch lap woes--help appreciated
  • From: "Bob May" <bobmay@nethere.com>
• Re: Re: ATM Microcontroller based telescope driver III
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM rounding the edge
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch lap woes--help appreciated
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM mirrors
  • From: "Bob May" <bobmay@nethere.com>
• ATM Re: surface accuracy
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM where can I purchase a 12.5" f/20 mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Re: surface accuracy
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM polishing help needed
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM where can I purchase a 12.5" f/20 mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM roughness
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Pitch Laps
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM where can I purchase a 12.5" f/20 mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pads
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM mirrors
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM What thread is it?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM telescope making books
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Blackhole listed
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM chasing pits??
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Tangent arm drive
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch lap woes--help appreciated
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Grinding area cleanliness
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Softening pitch
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM chasing pits??
  • From: "Bob May" <bobmay@nethere.com>
• ATM Re: [atm_free] Stubborn 1/2 " edge zone
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch lap woes--help appreciated
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM bearings, part II
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM trepanning diagonal
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM bearings, part II
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM what did I do wrong????
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Important Message from List Owner - Please Read!!!
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM 1/4 Micron
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Speculum Blank No. 5
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM tested today at lunch!
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Softening pitch - heritical thoughts
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Separating tool and mirror at fine grits
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Hi friends
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Melting pitch
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Spectroscopy and fiber optic info needed
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Re: [atm_free] Stubborn 1/2 " edge zone
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Melting pitch
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Stripped Down eyepiece
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Hi (This is the work of the Beagle worm)
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Home observatory advice requested
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Spectroscopy and fiber optic info needed
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Home observatory advice requested
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch mold, opinions needed
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Spectroscopy and fiber optic info needed
  • From: "Bob May" <bobmay@nethere.com>
• ATM bearings
  • From: "Bob Walker" <tac@i1.net>
• Re: ATM Star test
  • From: "Bryan Greer" <bgreer@fpi-protostar.com>
• RE: ATM mirrors
  • From: "c f" <quantemlp@hotmail.com>
• ATM chasing pits??
  • From: "c f" <quantemlp@hotmail.com>
• Re: ATM chasing pits??
  • From: "c f" <quantemlp@hotmail.com>
• ATM what did I do wrong????
  • From: "c f" <quantemlp@hotmail.com>
• ATM what did I do wrong part 2
  • From: "c f" <quantemlp@hotmail.com>
• RE: ATM what did I do wrong????
  • From: "c f" <quantemlp@hotmail.com>
• RE: ATM list worm virus.
  • From: "c f" <quantemlp@hotmail.com>
• ATM tested today at lunch!
  • From: "c f" <quantemlp@hotmail.com>
• Re: ATM Melting pitch
  • From: "c f" <quantemlp@hotmail.com>
• ATM pitch mold, opinions needed
  • From: "c f" <quantemlp@hotmail.com>
• ATM foucault tester built
  • From: "c f" <quantemlp@hotmail.com>
• Re: ATM pitch mold, opinions needed
  • From: "c f" <quantemlp@hotmail.com>
• [ATM] ronchi grating
  • From: quantemlp at hotmail.com (c f)
• FW: [ATM] make ronchi grating
  • From: quantemlp at hotmail.com (c f)
• [ATM] ronchi grate printed!!!
  • From: quantemlp at hotmail.com (c f)
• [ATM] what did I do wrong???
  • From: quantemlp at hotmail.com (c f)
• [ATM] Awsome!!!!!
  • From: quantemlp at hotmail.com (c f)
• Re: ATM hot glue for mirrors?
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: OT: ATM Blackhole listed
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] Re:books, Internet, quality information.
  • From: charlesmitchard at iinet.net.au (Charles Mitchard)
• Re: OT: ATM Blackhole listed and SPAM
  • From: "Chris Rowland" <chris_group_mail@dsl.pipex.com>
• Re: ATM Hi (This is the work of the Beagle worm)
  • From: "Chris Rowland" <chris_group_mail@dsl.pipex.com>
• ATM Metal to metal
  • From: Clive <c.rogers@ntlworld.com>
• ATM Metal to metal
  • From: Clive <c.rogers@ntlworld.com>
• RE: ATM Going price for an 8" plate glass blank
  • From: "CSC" <optic@gwi.net>
• RE: ATM "Perfect" Tri-Schiefspiegler in OSLO
  • From: "CSC" <optic@gwi.net>
• RE: ATM Overcorrected Mirror
  • From: "CSC" <optic@gwi.net>
• RE: ATM mirrors
  • From: Dale Eason <atmpob@yahoo.com>
• Re: ATM pitch lap woes--help appreciated
  • From: Dale Eason <atmpob@yahoo.com>
• Re: ATM foucault tester built
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Archive on CD
  • From: dan at croskrey.net (Dan Croskrey)
• Re: ATM Important Message from List Owner - Please Read!!!
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM sonotube/quiktube thickwall - where to buy
  • From: Daniel Fundo <fundo@bellsouth.net>
• ATM polishing
  • From: "Darryl Wilson" <stimpyssnotpad@xtra.co.nz>
• ATM polishing
  • From: "Darryl Wilson" <stimpyssnotpad@xtra.co.nz>
• Re: ATM gears and such
  • From: Dave Gault <daveg@tpg.com.au>
• Re: ATM gears and such
  • From: Dave Gault <daveg@tpg.com.au>
• Re: ATM Softening pitch - heritical thoughts
  • From: David Nicholls <dcn@dcnicholls.com>
• ATM possible aurora? (OT)
  • From: David Nicholls <dcn@dcnicholls.com>
• [ATM] New virus - be prepared (semi-OT)
  • From: dcn at dcnicholls.com (David Nicholls)
• Re: ATM Softening pitch
  • From: david.a.stevens@gm.com
• [ATM] plywood question
  • From: david.a.stevens at gm.com (david.a.stevens@gm.com)
• [ATM] Re: ATM sonotube/quiktube thickwall - where to buy
  • From: dpwoos at gmavt.net (Dennis Woos)
• ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• ATM Aluminizing: 1000 Watt dimmer circuit link
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: ATM Focuser stepper motor control
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• RE: ATM gears and such
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: ATM Grinding area cleanliness
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] No windows, no virus, no worry
  • From: dlwebb at canit.se (Dominic-Luc Webb)
• [ATM] Spectroscopy and fiber optic info needed
  • From: dlwebb at canit.se (Dominic-Luc Webb)
• Re: [ATM] Spectroscopy and fiber optic info needed
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] Spectroscopy and fiber optic info needed
  • From: dlwebb at canit.se (Dominic-Luc Webb)
• [ATM] Spectroscopy and fiber optic info needed
  • From: dlwebb at canit.se (Dominic-Luc Webb)
• Re: [ATM] Spectroscopy and fiber optic info needed
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] ronchi grating
  • From: dlwebb at canit.se (Dominic-Luc Webb)
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: mimas at charter.net (Donald "Don" Ware)
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: mimas at charter.net (Donald "Don" Ware)
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: mimas at charter.net (Donald "Don" Ware)
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: mimas at charter.net (Donald "Don" Ware)
• [ATM] subscribing to the new list
  • From: mimas at charter.net (Donald "Don" Ware)
• ATM Turcite X
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: ATM bearings
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: clement.focuser at verizon.net (Don Clement)
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: clement.focuser at verizon.net (Don Clement)
• Re: ATM Tangent arm drive
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: ATM Tangent arm drive
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Calculating Focuser Length and Travel
  • From: clement.focuser at verizon.net (Don Clement)
• Re: ATM bearings, part II
  • From: "Don D'Egidio" <djd521@comcast.net>
• RE: ATM gears and such
  • From: <dpitou@ix.netcom.com>
• RE: ATM bearings
  • From: <dpitou@ix.netcom.com>
• Re: Re: ATM Microcontroller based telescope driver III
  • From: "Dwight K. Elvey" <dwight.elvey@amd.com>
• Re: ATM re: unsubbing
  • From: "Dwight K. Elvey" <dwight.elvey@amd.com>
• Re: ATM telescope making books
  • From: "Eric Royer" <eroyer-liste@9online.fr>
• Re: OT: ATM Blackhole listed
  • From: "Frank" <frank@katestone.com.au>
• Re: [ATM] Difficulty subscribing
  • From: "Frank" <frank@katestone.com.au>
• [ATM] Difficulty subscribing
  • From: frank at katestone.com.au (Frank)
• [ATM] Classical Cassegrain Design Tradeoff Help Needed
  • From: frank at katestone.com.au (Frank)
• Re: ATM Microcontroller based telescope driver III
  • From: George Anderson <georgea@cam.org>
• Re: ATM bearings
  • From: George Anderson <georgea@cam.org>
• Re: ATM Looking for 8" f/4 mirror
  • From: George Anderson <georgea@cam.org>
• Re: ATM what did I do wrong????
  • From: George Anderson <georgea@cam.org>
• Re: ATM Home observatory advice requested
  • From: George Anderson <georgea@cam.org>
• Re: ATM possible aurora? (OT)
  • From: George Anderson <georgea@cam.org>
• Re: ATM Stripped Down eyepiece
  • From: George Anderson <georgea@cam.org>
• [ATM] Awsome!!!!!
  • From: georgea at cam.org (George Anderson)
• [ATM] Classical Cassegrain Design Tradeoff Help Needed
  • From: atmmessages at infinichron.com (Gerald Boutin)
• [ATM] Classical Cassegrain Design Tradeoff Help Needed
  • From: atmmessages at infinichron.com (Gerald Boutin)
• ATM Going price for an 8" plate glass blank
  • From: "gfbranden@earthlink.net" <gfbranden@earthlink.net>
• Re: ATM polishing help needed
  • From: "gfbranden@earthlink.net" <gfbranden@earthlink.net>
• Re: ATM Going price for an 8" plate glass blank
  • From: "gfbranden@earthlink.net" <gfbranden@earthlink.net>
• ATM atm class on Friday - machine & flats
  • From: "gfbranden@earthlink.net" <gfbranden@earthlink.net>
• ATM hot glue for mirrors?
  • From: "gfbranden@earthlink.net" <gfbranden@earthlink.net>
• Re: ATM Microcontroller based telescope driver III
  • From: gjnelson@absamail.co.za
• Re: Re: ATM Microcontroller based telescope driver III
  • From: gjnelson@absamail.co.za
• [ATM] Re: ATM Foucault software
  • From: gjnelson at absamail.co.za (gjnelson@absamail.co.za)
• [ATM] Re: ATM pitch mold, opinions needed
  • From: gjnelson at absamail.co.za (gjnelson@absamail.co.za)
• RE: ATM atmsite mirror
  • From: "Good, Donald" <dgood@aha.org>
• RE: ATM- Camera Disasters
  • From: "Good, Donald" <dgood@aha.org>
• Re: ATM Schiefspieglers in Oslo LT
  • From: "Good, Donald" <dgood@aha.org>
• RE: ATM Schiefspieglers in Oslo LT
  • From: "Good, Donald" <dgood@aha.org>
• RE: ATM Tangent arm drive
  • From: "Good, Donald" <dgood@aha.org>
• RE: ATM Schiefspieglers in Oslo LT - Error correction
  • From: "Good, Donald" <dgood@aha.org>
• RE: ATM A question about angular size at a distance
  • From: "Good, Donald" <dgood@aha.org>
• ATM Foucault software
  • From: Gordon Tulloch <gtulloch@shaw.ca>
• Re: ATM Home observatory advice requested
  • From: Gordon Tulloch <gtulloch@shaw.ca>
• ATM Date: Mon, 19 Jan 2004 15:34:42 -0700
  • From: "HARLICK, MICHEAL" <MHARLICK@cotr.bc.ca>
• Re: ATM Aluminizing: 1000 Watt dimmer circuit link
  • From: hermit <hermit@outofoptions.com>
• Re: ATM pitch lap woes--help appreciated
  • From: hermit <hermit@outofoptions.com>
• Re: ATM polishing help needed
  • From: hermit <hermit@outofoptions.com>
• Re: ATM roughness
  • From: hermit <hermit@outofoptions.com>
• Re: ATM Pitch Laps
  • From: hermit <hermit@outofoptions.com>
• RE: ATM Pitch Laps
  • From: hermit <hermit@outofoptions.com>
• ATM Glue for teflon
  • From: hermit <hermit@outofoptions.com>
• RE: ATM telescope making books
  • From: hermit <hermit@outofoptions.com>
• Re: OT: ATM Blackhole listed
  • From: hermit <hermit@outofoptions.com>
• Re: OT: ATM Blackhole listed and SPAM
  • From: hermit <hermit@outofoptions.com>
• Re: ATM Grinding area cleanliness
  • From: hermit <hermit@outofoptions.com>
• Re: ATM Softening pitch
  • From: hermit <hermit@outofoptions.com>
• Re: ATM list worm virus.
  • From: hermit <hermit@outofoptions.com>
• Re: ATM re: unsubbing
  • From: hermit <hermit@outofoptions.com>
• ATM Printing an ellipse (-> secondary mirrors)
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM atm
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM polishing help needed
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM surface accuracy
  • From: Hugues.Laroche@ses-astra.com
• RE: ATM telescope making books
  • From: Hugues.Laroche@ses-astra.com
• ATM What thread is it?
  • From: Hugues.Laroche@ses-astra.com
• Re: OT: ATM Blackhole listed and SPAM
  • From: Hugues.Laroche@ses-astra.com
• ATM Re: Test stand setup for 30"
  • From: Hugues.Laroche@ses-astra.com
• ATM Virus in majordomo??? (was: Majordomo results: Hi)
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM pitch mold, opinions needed
  • From: Hugues.Laroche@ses-astra.com
• [ATM] Binocular Telescope
  • From: mckernan at murdoch.edu.au (Ian McKernan)
• ATM Toy-Scope
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: ATM A question about angular size at a distance
  • From: IAPDK@ADMIN.DRAKE.EDU
• ATM rounding the edge
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM directions
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM toy of the future
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM bang zoom
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM Fwd: bang zoom:in perspective
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM building a GEM
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM more on mounts
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM Spring outing
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM re-subscribing
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] checking in
  • From: renrepro at surfglobal.net (Ina Ron Lippard Renaissance Reproductions)
• ATM tangent arm drive
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] looking for two men
  • From: renrepro at surfglobal.net (Ina Ron Lippard Renaissance Reproductions)
• [ATM] telescope plans
  • From: renrepro at surfglobal.net (Ina Ron Lippard Renaissance Reproductions)
• [ATM] plywood question
  • From: renrepro at surfglobal.net (Ina Ron Lippard Renaissance Reproductions)
• Re: OT: ATM Blackhole listed
  • From: "issam mansour" <imans@rogers.com>
• ATM re: unsubbing
  • From: "issam mansour" <imans@rogers.com>
• [ATM] ATM List2 is Alive
  • From: jsstars at worldnet.att.net (J&S)
• [ATM] ATM RE: A question about angular size at a distance
  • From: jsstars at worldnet.att.net (J&S)
• Re: ATM Tangent arm drive
  • From: "J&S" <jsstars@worldnet.att.net>
• [ATM] Re: ATM Tangent arm drive
  • From: jsstars at worldnet.att.net (J&S)
• Re: ATM where can I purchase a 12.5" f/20 mirror
  • From: "J. Christopher Westland" <westland@ust.hk>
• Re: ATM bang zoom
  • From: "Jack Day" <jday@www.genext.net>
• Re: ATM Finishing a Hastings Tube???
  • From: "Jack Schmidling" <arf@mc.net>
• Re: ATM Home observatory advice requested
  • From: "Jack Schmidling" <arf@mc.net>
• ATM 24" vacuum chamber is getting closer :)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: jlerch1 at tampabay.rr.com (James Lerch)
• [ATM] First optical components coated in new 25" box coater :)
  • From: jlerch1 at tampabay.rr.com (James Lerch)
• re:ATM Home observatory advice requested
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: ATM Re: [atm_free] Stubborn 1/2 " edge zone
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Re: [atm_free] Stubborn 1/2 " edge zone
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Re: [atm_free] Stubborn 1/2 " edge zone
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• [ATM] Binocular Telescope
  • From: jonah at eecs.berkeley.edu (Jeff Anderson-Lee)
• RE: ATM Pitch Laps
  • From: "Jerry" <wa4guu@verizon.net>
• RE: ATM what did I do wrong????
  • From: "Jerry" <wa4guu@verizon.net>
• RE: ATM A question about angular size at a distance
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Rouge
  • From: wa4guu at verizon.net (Jerry)
• Re: ATM polishing
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• ATM trepanning diagonal
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: ATM Melting pitch
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: ATM directions
  • From: "Jerry Reddell" <jumping.jack@sbcglobal.net>
• Re: ATM bang zoom
  • From: "Jerry Reddell" <jumping.jack@sbcglobal.net>
• Re: ATM bang zoom
  • From: "Jerry Reddell" <jumping.jack@sbcglobal.net>
• [ATM] Re: ATM Pre-polish with HCF
  • From: burrjaw at earthlink.net (Jim Burrows)
• Re: ATM Going price for an 8" plate glass blank
  • From: "Jim Girard" <argojg@comcast.net>
• [ATM] looking for two men
  • From: argojg at comcast.net (Jim Girard)
• OT: ATM Blackhole listed
  • From: "Jim Miller" <jim@jtmiller.com>
• [ATM] anyone on the new list yet?
  • From: jim at jtmiller.com (Jim Miller)
• ATM list worm virus.
  • From: Joe Campbell <joe@esper.com>
• RE: ATM Metal to metal
  • From: Joe Curran <jcurran@asymtek.com>
• ATM Home observatory advice requested
  • From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
• RE: ATM Hi (This is the work of the Beagle worm)
  • From: "John Murray" <imasloth@bigpond.com>
• Re: ATM Schiefspieglers in Oslo LT
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM pitch mold, opinions needed
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM Building Plans for a super-cheap educational scope
  • From: "John Sherman" <shermj@netzero.net>
• [ATM] Help with Mirror
  • From: jonathan_bishop at sbcglobal.net (Jonathan Bishop)
• ATM Looking for 8" f/4 mirror
  • From: "Joseph Colosi" <colosi@aosi.com>
• [ATM] Spectroscopy and fiber optic info needed
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Re: ATM Softening pitch - heritical thoughts
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Re: ATM Spectroscopy and fiber optic info needed
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Re: ATM Spectroscopy and fiber optic info needed
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Spectroscopy and fiber optic info needed
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Re: ATM Spectroscopy and fiber optic info needed
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Re: ATM Melting pitch
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• [ATM] Help with Mirror
  • From: jsgrmfg at gracemfg.com (jsgrmfg@gracemfg.com)
• Re: ATM temperature considerations--Gugolz 64
  • From: "Keith Taylor" <keith.h.taylor@worldnet.att.net>
• ATM Pitch Laps
  • From: "Keith Taylor" <keith.h.taylor@worldnet.att.net>
• Re: ATM Finishing a Hastings Tube???
  • From: "Keith Taylor" <keith.h.taylor@worldnet.att.net>
• ATM Aluminim Primers
  • From: "Keith Taylor" <keith.h.taylor@worldnet.att.net>
• ATM Posting Rejected
  • From: "Keith Taylor" <keith.h.taylor@worldnet.att.net>
• [ATM] anyone on the new list yet?
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] Difficulty subscribing
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] A question about angular size at a distance.
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] ATM presentation
  • From: hermit at outofoptions.org (Ken Lowther)
• ATM End of the list countdown
  • From: Ken Lowther <hermit@outofoptions.com>
• [ATM] ATM presentation
  • From: hermit at outofoptions.org (Ken Lowther)
• Fwd: Re: [ATM] Re: ATM pitch mold, opinions needed
  • From: Ken Lowther <hermit@outofoptions.com>
• [ATM] Re: ATM pitch mold, opinions needed
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] Re: ATM End of the list countdown
  • From: hermit at outofoptions.org (Ken Lowther)
• Fwd: Re: [ATM] Re: ATM pitch mold, opinions needed
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] subscribing to new list
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] subscribing to the new list
  • From: hermit at outofoptions.org (Ken Lowther)
• FW: Re: [ATM] subscribing to new list
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] countdown
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] looking for two men
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] viruses
  • From: hermit at outofoptions.org (Ken Lowther)
• [ATM] ATM Grit Sequence for 8" Mirror
  • From: hermit at outofoptions.org (Ken Lowther)
• Re: ATM Glue for teflon
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM Glue for teflon: Cola
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM Metal to metal
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM Softening pitch
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM Stripped Down eyepiece
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM pitch mold, opinions needed
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM pitch mold, opinions needed
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: ATM pitch mold, opinions needed
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• ATM bearings
  • From: "Kreig McBride" <astroguy@nas.com>
• ATM bearings, part II
  • From: "Kreig McBride" <astroguy@nas.com>
• [ATM] subscribing to new list
  • From: Leftfieldstar at aol.com (Leftfieldstar@aol.com)
• [ATM] subscribing to the new list
  • From: Leftfieldstar at aol.com (Leftfieldstar@aol.com)
• [ATM] test, no content
  • From: Leftfieldstar at aol.com (Leftfieldstar@aol.com)
• [ATM] subscribing to the new list
  • From: luth-astro at earthlink.net (luth-astro@earthlink.net)
• ATM sonotube/quiktube thickwall - where to buy
  • From: m13 91b <m1391b@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• ATM Canon A70 digital camera lash up.
  • From: "Marco Miglionico" <marco.pm@btopenworld.com>
• ATM Stripped Down eyepiece
  • From: "Marco Miglionico" <marco.pm@btopenworld.com>
• ATM Carbon Truss Alternative
  • From: "Marco Miglionico" <marco.pm@btopenworld.com>
• [ATM] Carbon Truss Alternative
  • From: marco.pm at btopenworld.com (Marco Miglionico)
• FW: [ATM] make ronchi grating
  • From: saundby at foothill.net (Mark Graybill)
• FW: [ATM] make ronchi grating
  • From: saundby at foothill.net (Mark Graybill)
• FW: [ATM] make ronchi grating
  • From: saundby at foothill.net (Mark Graybill)
• Re: ATM Softening pitch - heritical thoughts
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Digest is working
  • From: mdholm at telerama.com (Mark Holm)
• [ATM] Help with Mirror
  • From: mdholm at telerama.com (Mark Holm)
• [ATM] what did I do wrong???
  • From: mdholm at telerama.com (Mark Holm)
• ATM Microcontroller based scope driver III - More memory
  • From: martin.cibulski@t-online.de (Martin Cibulski)
• ATM Microcontroller based telescope driver III - More Memory
  • From: martin.cibulski@t-online.de (Martin Cibulski)
• Re: ATM Microcontroller based telescope driver III - More Memory
  • From: martin.cibulski@t-online.de (Martin Cibulski)
• Re: Re: ATM Microcontroller based telescope driver III
  • From: martin.cibulski@degussa.com
• ATM Zeiss E-type lens
  • From: Matheus Jatkoske Lazo <mjlazo@if.sc.usp.br>
• ATM Pre-polish with HCF
  • From: Matheus Jatkoske Lazo <mjlazo@if.sc.usp.br>
• ATM Pre-polish with HCF
  • From: Matheus Jatkoske Lazo <mjlazo@if.sc.usp.br> (by way of Matheus Jatkoske Lazo <mjlazo@if.sc.usp.br>)
• Fwd: ATM pitch lap woes--help appreciated
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• Fwd: ATM Star test
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• ATM "Perfect" Tri-Schiefspiegler in OSLO
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• [ATM] ronchi grating
  • From: mbyorick at starband.net (mbyorick)
• Re: ATM Newbie with a problem (flat spot on tool)
  • From: mdholm@telerama.com
• Re: ATM Mirror Blank Imperfect Circle...
  • From: mdholm@telerama.com
• Re: ATM where can I purchase a 12.5" f/20 mirror
  • From: mdholm@telerama.com
• Re: ATM roughness
  • From: mdholm@telerama.com
• Re: ATM Pitch Laps
  • From: mdholm@telerama.com
• No Subject
  • From: mdholm@telerama.com
• Re: ATM tested today at lunch!
  • From: mdholm@telerama.com
• Re: ATM Hi (This is the work of the Beagle worm)
  • From: mdholm@telerama.com
• Re: ATM Hi (This is the work of the Beagle worm)
  • From: mdholm@telerama.com
• Fwd: ATM Star test
  • From: mdholm@telerama.com
• [ATM] (no subject)
  • From: mdholm at telerama.com (mdholm@telerama.com)
• Re: ATM polishing
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: ATM temperature considerations--Gugolz 64
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• ATM: Large mirror rotation on turntable to limit astigmatisn
  • From: Michael Conron <mconron@yahoo.com>
• Re: ATM: Large mirror rotation on turntable to limit astigmatisn
  • From: Michael Conron <mconron@yahoo.com>
• Re: ATM bang zoom
  • From: Michael Conron <mconron@yahoo.com>
• ATM Re: Test stand setup for 30"
  • From: Michael Conron <mconron@yahoo.com>
• ATM stained mirror edge and water delivery system
  • From: Michael Conron <mconron@yahoo.com>
• ATM a quck pic of the staining discussed earlier
  • From: Michael Conron <mconron@yahoo.com>
• Re: ATM Important Message from List Owner - Please Read!!!
  • From: Michael Conron <mconron@yahoo.com>
• Re: ATM polishing help needed
  • From: Michael Lindner <mikell@optonline.net>
• Re: OT: ATM Blackhole listed
  • From: Michael Lindner <mikell@optonline.net>
• ATM Important Message from List Owner - Please Read!!!
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] Welcome
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] Welcome
  • From: mikell at optonline.net (Michael Lindner)
• Re: ATM Melting pitch
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] anyone on the new list yet?
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] ATM presentation
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] ATM presentation
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] Interferometer Fringe Contrast From Coated Mirrors
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] Re: Posting rejected
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] Re: ATM End of the list countdown
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] subscribing to new list
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] New virus - be prepared (semi-OT)
  • From: mikell at optonline.net (Michael Lindner)
• FW: [ATM] make ronchi grating
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] Archive on CD
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] what did I do wrong???
  • From: mikell at optonline.net (Michael Lindner)
• [ATM] Spectroscopy and fiber optic info needed
  • From: mpeck1 at ix.netcom.com (Michael Peck)
• [ATM] Re: ATM Spectroscopy and fiber optic info needed
  • From: mpeck1 at ix.netcom.com (Michael Peck)
• [ATM] ATM: FringeXP comparison to professional software
  • From: mpeck1 at ix.netcom.com (Michael Peck)
• [ATM] Classical Cassegrain Design Tradeoff Help Needed
  • From: mpeck1 at ix.netcom.com (Michael Peck)
• [ATM] Classical Cassegrain Design Tradeoff Help Needed
  • From: mpeck1 at ix.netcom.com (Michael Peck)
• Re: ATM polishing
  • From: Mike Coslo <mjc5@psu.edu>
• ATM Bryers Gear?
  • From: Mike Spacedude40 <spacedude40@yahoo.com>
• [ATM] Calculating Focuser Length and Travel
  • From: mwarne at network2000-hi.com (Mike Warne)
• Re: ATM Bryers Gear?
  • From: Mimas@aol.com
• Re: ATM Aluminim Primers
  • From: Mimas@aol.com
• ATM Grinding area cleanliness
  • From: "mlbrown@everstrive.com" <mlbrown@everstrive.com>
• FW: Re: ATM Grinding area cleanliness
  • From: "mlbrown@everstrive.com" <mlbrown@everstrive.com>
• ATM Melting pitch
  • From: "mlbrown@everstrive.com" <mlbrown@everstrive.com>
• FW: [ATM] Spectroscopy and fiber optic info needed
  • From: "mlbrown@everstrive.com" <mlbrown@everstrive.com>
• FW: [ATM] make ronchi grating
  • From: mlbrown at everstrive.com (mlbrown@everstrive.com)
• FW: Re: [ATM] subscribing to new list
  • From: mlbrown at everstrive.com (mlbrown@everstrive.com)
• ATM List moving on 2/5/04
  • From: Mr Michael Lindner <mlindnerp@yahoo.com>
• RE: ATM roughness
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• Re: ATM Tangent arm drive
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• Live again feel fantastic!-quill
  • From: "Nestor Proctor" <iacnmr09@yahoo.com>
• RE: ATM Going price for an 8" plate glass blank
  • From: "Old Salt Fish" <oldsaltfish@hotmail.com>
• ATM polishing help needed
  • From: "Old Salt Fish" <oldsaltfish@hotmail.com>
• Re: ATM polishing help needed
  • From: "Old Salt Fish" <oldsaltfish@hotmail.com>
• Re: ATM polishing help needed
  • From: "Old Salt Fish" <oldsaltfish@hotmail.com>
• Re: ATM polishing help needed
  • From: "Old Salt Fish" <oldsaltfish@hotmail.com>
• Re: ATM bang zoom
  • From: "Pat Bunn" <pbunn@patbunn.com>
• Re: ATM bang zoom
  • From: "Pat Bunn" <pbunn@patbunn.com>
• Re: ATM Finishing a Hastings Tube???
  • From: "Pat Bunn" <pbunn@patbunn.com>
• Re: ATM Finishing a Hastings Tube???
  • From: "Pat Bunn" <pbunn@patbunn.com>
• [ATM] Stepper motor Driver for focuser
  • From: pbunn at patbunn.com (Pat Bunn)
• [ATM] Stepper motor Driver for focuser
  • From: pbunn at patbunn.com (Pat Bunn)
• Re: ATM Re: [VacuumX] 24" vacuum chamber is getting closer :)
  • From: "pbunn" <pbunn@patbunn.com>
• ATM Focuser stepper motor control
  • From: "pbunn" <pbunn@patbunn.com>
• ATM Finishing a Hastings Tube???
  • From: "pbunn" <pbunn@patbunn.com>
• Re: ATM Grinding area cleanliness
  • From: "pbunn" <pbunn@patbunn.com>
• Re: ATM Finishing a Hastings Tube???
  • From: "pbunn" <pbunn@patbunn.com>
• Re: ATM Bryers Gear?
  • From: "Peter" <peter@kitgear.com>
• RE: ATM telescope making books
  • From: "Peter" <peter@kitgear.com>
• RE: ATM telescope making books
  • From: "Peter" <peter@kitgear.com>
• RE: ATM gears and such
  • From: "Peter" <peter@kitgear.com>
• RE: ATM gears and such
  • From: "Peter" <peter@kitgear.com>
• [ATM] ATM: FringeXP comparison to professional software
  • From: pjifl at bigpond.com.au (Peter John Smith)
• [ATM] A question about angular size at a distance.
  • From: pkreisle at earthlink.net (PK)
• ATM A question about angular size at a distance
  • From: "PK" <pkreisle@earthlink.net>
• [ATM] Fw: ATM bearings, part II
  • From: pkreisle at earthlink.net (PK)
• Re: ATM bearings
  • From: polaraligned <polaraligned@optonline.net>
• Re: ATM Finishing a Hastings Tube???
  • From: polaraligned <polaraligned@optonline.net>
• [ATM] 25" f/5 folded newtonian
  • From: polaraligned at optonline.net (polaraligned)
• ATM Hi friends
  • From: "RAJA KUMAR" <craja753@rediffmail.com>
• ATM Sub-Diameter Lap?
  • From: "Ray@J-Engineering.com" <Ray@J-Engineering.com>
• [ATM] Re: ATM Sub-Diameter Lap?
  • From: Ray at J-Engineering.com (Ray@J-Engineering.com)
• [ATM] Re: Sub-Diameter Lap?
  • From: Ray at J-Engineering.com (Ray@J-Engineering.com)
• [ATM] Re: ATM End of the list countdown
  • From: Ray at J-Engineering.com (Ray@J-Engineering.com)
• [ATM] ATM: Interferometer - images of odd fringes
  • From: radicell2 at yahoo.com (Ric Rokosz)
• [ATM] ATM: Interferometer - images of odd fringes-correction
  • From: radicell2 at yahoo.com (Ric Rokosz)
• [ATM] ATM: FringeXP comparison to professional software
  • From: radicell2 at yahoo.com (Ric Rokosz)
• [ATM] ATM: FringeXP comparison to professional software
  • From: radicell2 at yahoo.com (Ric Rokosz)
• [ATM] ATM: FringeXP comparison -Phase shifting
  • From: radicell2 at yahoo.com (Ric Rokosz)
• Re: ATM Triplet Prescription
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM Triplet Prescription
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• ATM Scopemobile GT?
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM Finishing a Hastings Tube???
  • From: "Richard Ozer" <rozer@ois-online.com>
• Re: ATM polishing
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: ATM Softening pitch - heritical thoughts
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: ATM pitch mold, opinions needed
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: ATM what did I do wrong????
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: [ATM] Difficulty subscribing
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: [ATM] Difficulty subscribing
  • From: Rick Maillet <bucko_62@yahoo.com>
• RE: ATM temperature considerations--Gugolz 64
  • From: "Robert Turner" <rbturner@charter.net>
• ATM Figure Center Too Deep
  • From: "Robert Turner" <rbturner@charter.net>
• ATM Overrcorrected Mirror
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] More Beginner Woes
  • From: rbturner at charter.net (Robert Turner)
• [ATM] Help with Mirror
  • From: rbturner at charter.net (Robert Turner)
• [ATM] Help with Mirror
  • From: rbturner at charter.net (Robert Turner)
• [ATM] First optical components coated in new 25" box coater :)
  • From: rbturner at charter.net (Robert Turner)
• ATM pitch lap woes--help appreciated
  • From: "Rodney Mayes" <r.gm@muhlon.com>
• Re: ATM pitch lap woes--help appreciated
  • From: "Rodney Mayes" <r.gm@muhlon.com>
• ATM temperature considerations--Gugolz 64
  • From: "Rodney Mayes" <r.gm@muhlon.com>
• Re: ATM Going price for an 8" plate glass blank
  • From: "Rodney Mayes" <r.gm@muhlon.com>
• ATM Polishing, facets, and bullseye
  • From: "Rodney Mayes" <r.gm@muhlon.com>
• ATM Bullseye during polishing--comments appreciated
  • From: "Rodney Mayes" <r.gm@muhlon.com>
• [ATM] Polishing--comments appreciated
  • From: r.gm at muhlon.com (Rodney Mayes)
• Re: ATM Finishing a Hastings Tube???
  • From: "Ron Newman" <ronaldn@ptd.net>
• Re: ATM sonotube/quiktube thickwall - where to buy
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: ATM Building Plans for a super-cheap educational scope
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] Re: ATM Building Plans for a super-cheap educational scope
  • From: rsackett00 at yahoo.com (Ross Sackett)
• [ATM] plywood question (back on topic)
  • From: rsackett00 at yahoo.com (Ross Sackett)
• RE: ATM Melting pitch
  • From: Royston_Jeremy@emc.com
• [ATM] ATM Grit Sequence for 8" Mirror
  • From: Royston_Jeremy at emc.com (Royston_Jeremy@emc.com)
• RE: ATM rounding the edge
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• RE: ATM Pitch Laps
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• RE: ATM trepanning diagonal
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• RE: ATM Stripped Down eyepiece
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• RE: ATM Overrcorrected Mirror
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: ATM Re: [atm_free] Stubborn 1/2 " edge zone
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] RE: Test
  • From: russjocoy at hotmail.com (Russell Jocoy)
• [ATM] OT: Mailbox Filter test....Don't read
  • From: mondior at zoominternet.net (Samuel DiRocco)
• ATM Happy holidays
  • From: "Scott Berfield" <sberfield@xbox.com>
• RE: ATM bang zoom
  • From: "Scott Berfield" <sberfield@xbox.com>
• RE: ATM Grinding area cleanliness
  • From: "Scott Berfield" <sberfield@xbox.com>
• RE: ATM pitch mold, opinions needed
  • From: "Scott Berfield" <sberfield@xbox.com>
• ATM Tangent arm drive
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: ATM Home observatory advice requested
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: ATM Tangent arm drive
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• ATM Melting Pitch
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• [ATM] ATM presentation
  • From: srychnov at chem.ps.uci.edu (Scott Rychnovsky)
• ATM Separating tool and mirror at fine grits
  • From: "Shane Scott" <shanesm@earthlink.net>
• [ATM] List bounces - an apology
  • From: simo at simoivanov.com (simeon ivanov)
• RE: ATM OT - Virus disclaimer
  • From: "Stanley A. Schultz" <schultz@ucalgary.ca>
• Re: ATM telescope making books
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• [ATM] new list
  • From: koehler at securecomputing.com (Stephen C. Koehler)
• [ATM] long analysis of my Torus mirror
  • From: koehler at securecomputing.com (Stephen C. Koehler)
• [ATM] ATM: FringeXP comparison to professional software
  • From: koehler at securecomputing.com (Stephen C. Koehler)
• ATM mirrors
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM mirror fixing
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM atm
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM roughness
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM glass
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM polishing
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM pads
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM mirrors
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM atm
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM gorica
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM gorica staklo
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM glass
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• ATM telescope making books
  • From: "stipe vladova" <stipe.vladova@st.hinet.hr>
• Re: ATM Toy-Scope
  • From: "Thomas" <tomjan@ozemail.com.au>
• ATM Ever wanted to study at MIT??
  • From: "Thomas" <tomjan@ozemail.com.au>
• Re: ATM Softening pitch - heritical thoughts
  • From: "Thomas" <tomjan@ozemail.com.au>
• [ATM] Re: ATM Pre-polish with HCF
  • From: tomjan at ozemail.com.au (Thomas)
• Re: ATM Microcontroller based telescope driver III - More Memory
  • From: Thomas Bryhn <thomas.bryhn@fys.uio.no>
• ATM Re: Experiential versus Emperical cage height minimum
  • From: tkrajci@san.osd.mil
• ATM Re: mirrors
  • From: tkrajci@san.osd.mil
• Re: ATM roughness
  • From: tkrajci@san.osd.mil
• RE:ATM telescope making books
  • From: tkrajci@san.osd.mil
• Re: ATM gears and such
  • From: tkrajci@san.osd.mil
• ATM bearings, part II
  • From: tkrajci@san.osd.mil
• Re: ATM Home observatory advice requested
  • From: tkrajci@san.osd.mil
• Re: ATM A question about angular size at a distance
  • From: tkrajci@san.osd.mil
• Re: ATM pitch mold, opinions needed
  • From: tkrajci@san.osd.mil
• Re: ATM pitch mold, opinions needed
  • From: tkrajci@san.osd.mil
• Re: ATM A question about angular size at a distance
  • From: tkrajci@san.osd.mil
• RE: ATM Tangent arm drive
  • From: tkrajci@san.osd.mil
• [ATM] Re: Sub-Diameter Lap?
  • From: tkrajci at san.osd.mil (tkrajci@san.osd.mil)
• [ATM] RE: A question about angular size at a distance
  • From: tkrajci at san.osd.mil (Tom Krajci)
• [ATM] RE: Re: Sub-Diameter Lap?
  • From: tkrajci at san.osd.mil (Tom Krajci)
• ATM Experiential versus Emperical cage height minimum
  • From: Tom Lakovic <tlakovic@comcast.net>
• [ATM] Ending notes of old list
  • From: tom-keyword-atm2.7444eb at moulton.us (Tom Moulton)
• Re: ATM pitch lap woes--help appreciated
  • From: "Tom Stokes" <tstokes@pacbell.net>
• Re: ATM pitch lap woes--help appreciated
  • From: "Tom Stokes" <tstokes@pacbell.net>
• FW: [ATM] make ronchi grating
  • From: tstokes at pacbell.net (Tom Stokes)
• re:ATM Canon A70 digital camera lash up.
  • From: tomandbeth@theriver.com
• ATM Building Plans for a super-cheap educational scope
  • From: "Torquil MacCorkle, III" <torquil@chemist.com>
• .Give. her "all-niters" every nite !
  • From: "Vicki Coulter" <dazqvlwqkzxt@yahoo.com>
• Re: ATM mirrors
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• Re: ATM Turcite X
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• Re: ATM mirrors
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• [ATM] Re:books, Internet, quality information.
  • From: vladimir.galogaza at zg.tel.hr (Vladimir Galogaza)
• [ATM] ronchi grating
  • From: vladimir.galogaza at zg.tel.hr (Vladimir Galogaza)
• [ATM] Testing
  • From: vladimir.galogaza at zg.tel.hr (Vladimir Galogaza)
• [ATM] what did I do wrong???
  • From: vladimir.galogaza at zg.tel.hr (Vladimir Galogaza)
• [ATM] ATM: FringeXP comparison to professional software
  • From: vladimir.galogaza at zg.tel.hr (Vladimir Galogaza)
• [ATM] ATM: FringeXP comparison to professional software
  • From: vladimir.galogaza at zg.tel.hr (Vladimir Galogaza)
• Re: Re: ATM Microcontroller based telescope driver III
  • From: "Wesley Bielinski" <wbielinski@sbcglobal.net>
• Re: ATM pitch lap woes--help appreciated
  • From: Woodchuck <djv@bedford.net>
• Re: ATM bearings
  • From: Woodchuck <djv@bedford.net>
• Re: ATM tested today at lunch!
  • From: Woodchuck <djv@bedford.net>
• Re: ATM pitch mold, opinions needed
  • From: Woodchuck <djv@bedford.net>