[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM Advice with Flexing a 16"

To: atm@shore.net
Subject: Re: ATM Advice with Flexing a 16"
From: Mark Holm <mdholm@telerama.com>
Date: Sun, 19 Jan 2003 15:07:00 -0500
Reply-To: Mark Holm <mdholm@telerama.com>
Sender: owner-atm@shore.net
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2


Here is a thought on support during grinding.

After the back is shaped, cast a plaster or cement "tool" against it as if 
making a lap support.  When it is cured, flip it over, line it with something 
firm but springy like firm, thin foam rubber and put the mirror on top to work 
the upper face.  shouldn't be too much different from working a thin mirror on a 
cushy pad.

Mark Holm
mdholm@telerama.com

Prev by Author: ATM Schiefspieglers in Oslo LT
Next by Author: Re: ATM intersecting light
Prev by thread: Re: ATM Advice with Flexing a 16"
Next by thread: ATM Airplane Trunions
Index(es):
- Author
- Thread