[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM Update on 10" & 9" x 5/8" mirrors

To: "atmlist" <atm@shore.net>
Subject: Re: ATM Update on 10" & 9" x 5/8" mirrors
From: "Bob May" <bobmay@nethere.com>
Date: Sun, 5 Jan 2003 11:47:43 -0800
References: <F129iqJmdTcjJxWY5pC000231cd@hotmail.com>
Reply-To: "Bob May" <bobmay@nethere.com>
Sender: owner-atm@shore.net


I'd not worry too much about flex but if you want to, make up the mirror
cell and tilt it at a 20-40deg. angle to the horizontal and set your tester
at that angle and you won't have any problems.  You don't have to get to the
vertical as you just need to support the backside properly.  The mirror at
the floor and your tester at eyelevel will be just fine.
Bob May
http://nav.to/bobmay
bobmay@nethere.com
NEW! http://bobmay.astronomy.net

References:
- ATM Update on 10" & 9" x 5/8" mirrors
  - From: "Russell Jocoy" <russjocoy@hotmail.com>

Prev by Author: Re: ATM Web Sight update
Next by Author: Re: ATM Focuser Baffle and Dall Kirkham design with Naismyth Focus
Prev by thread: ATM Update on 10" & 9" x 5/8" mirrors
Next by thread: ATM Updated Page 25" Folded Newt Project
Index(es):
- Author
- Thread