[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

ATM 1/2 in plate max diameter usefullness?

To: "atm" <atm@shore.net>
Subject: ATM 1/2 in plate max diameter usefullness?
From: "pdk" <pdk@tampabay.rr.com>
Date: Fri, 4 Jan 2002 21:44:38 -0500
Reply-To: "pdk" <pdk@tampabay.rr.com>
Sender: owner-atm@shore.net


Opinions on the maximum size mirror (if any)
you would make out of 1/2 inch plate glass?
(ITS FREE so I am tempted to make some 
mirrors from it)
I am concerned it would be too flexible and
become astigmatic during production.
I believe I can mount it in such a way as to 
avoid any significant deformation there.

Thanks,
PK

Follow-Ups:
- Re: ATM 1/2 in plate max diameter usefullness?
  - From: "James Lerch" <jlerch1@tampabay.rr.com>

Prev by Author: Re: ATM Minimum angle between altitude teflon pads
Next by Author: ATM NOT AN AD, but I thought some might find this design interesting....
Prev by thread: Re: ATM .75" secondary
Next by thread: Re: ATM 1/2 in plate max diameter usefullness?
Index(es):
- Author
- Thread