Amateur Telescope Makers (ATM) Archive for JAN02 - by author
- ATM Offtopic - Visa in USA
- From: Søren Neigaard <neigaard@e-box.dk>
- ATM Yet another interesting thought
- From: Technologie2000@t-online.de (Helmut Göbkes)
- Re: ATM Another dangerous thought
- From: Technologie2000@t-online.de (Helmut Göbkes)
- Re: ATM Yet another interesting thought
- From: Technologie2000@t-online.de (Helmut Göbkes)
- ATM Looking for CCD-Shutters
- From: Technologie2000@t-online.de (Helmut Göbkes)
- Re: ATM Is this really glass?
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM town observatory
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM Glass Advice
- From: "A.T.S." <drummer@austin.rr.com>
- ATM Q: Fog-streaks during polishing
- From: "A.T.S." <drummer@austin.rr.com>
- ATM atm newbie - where to get glass?
- Re: ATM atm newbie - where to get glass?
- Re: ATM atm newbie - where to get glass?
- Re: ATM PTFE filled J-B Weld
- From: Aart Olsen <aolsen@prairienet.org>
- Re: ATM shear in silicone pads
- From: Aart Olsen <aolsen@prairienet.org>
- Re: ATM Photo enlarger lenses
- From: "Adam Smith" <ajusmith@vaultmaster.com>
- Re: ATM My new "death ray"
- From: "Albert Highe" <ahighe@ix.netcom.com>
- ATM Newbie questions from Argentina
- From: Alvaro Cortizo <alvaro@netpandora.com>
- No Subject
- Re: ATM Fuel cells in the future?
- From: AMaroney@sptimes.com
- RE: ATM 18 inch telescope
- From: "Amelia Thomas" <amelia_thomas@hotmail.com>
- Re: ATM 3 inch reflector
- From: "Amelia Thomas" <amelia_thomas@hotmail.com>
- Re: ATM Another dangerous thought
- From: "Andrew Schott" <aschott@cfl.rr.com>
- Re: ATM 16" F/33 valid design?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM 16" F/33 valid design?
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM Looking for CCD-Shutters
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Ultra-lite Dobs using foam core components
- From: Andy Zangle <njzangle@optonline.net>
- RE: ATM Another dangerous thought
- From: "Angel Caparros" <wylecoyote@terra.es>
- RV: ATM Another dangerous thought
- From: "Angel Caparros" <wylecoyote@terra.es>
- RV: ATM Another dangerous thought
- From: "Angel Caparros" <wylecoyote@terra.es>
- RE: ATM Patience is the dirty secret of astronomy. ( I think )
- From: "Angel Caparros" <wylecoyote@terra.es>
- Re: ATM 18 inch telescope
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM LIttle Glass Buttons
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM ultralight flexible mirror
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: Anthony Stillman <atmer@flash.net>
- ATM Balls
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM first decent seeing for 16" f/3.9
- From: Anthony Stillman <atmer@flash.net>
- ATM Got Glass?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Another dangerous thought
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Another dangerous thought
- From: Anthony Stillman <atmer@flash.net>
- ATM Anodized Aherence
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Anodized Adherence
- From: Anthony Stillman <atmer@flash.net>
- ATM Commercial Query
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Questions on The Perfect Machine
- From: Anthony Stillman <atmer@flash.net>
- ATM Optical Tooling
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Commercial Query
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Optical Tooling
- From: Anthony Stillman <atmer@flash.net>
- Horseshoe Mounts (was ATM Refractor Design)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Optical Tooling
- From: Anthony Stillman <atmer@flash.net>
- ATM Dream Machine (was Horseshoe Mounts)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM cerium oxide question....
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM 11.2" F/2 Primary testing questions :)
- Re: ATM 11.2" F/2 Primary testing questions :)
- ATM LIttle Glass Buttons
- Re: ATM LIttle Glass Buttons
- Re: ATM LIttle Glass Buttons
- Re: ATM LIttle Glass Buttons
- Re: ATM Change of Plans, F/2 -> F/3.2
- Re: ATM Change of Plans, F/2 -> F/3.2
- Re: ATM Change of Plans, F/2 -> F/3.2
- Re: ATM Flux density
- ATM Unit Conversions and Trusses
- ATM Figure45 and win xp
- Re: ATM orion
- Re: ATM mirror from hell - help
- Re: ATM Mechanical numbers for BVC for use in Plop
- Re: ATM Yet another interesting thought
- Re: ATM Yet another interesting thought
- Re: ATM Yet another interesting thought
- Re: ATM stopping a newtonian.
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- ATM effective balancing weight for a dob
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- RE: ATM effective balancing weight for a dob
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- Re: ATM Non lasing lerer diode Question
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- ATM shear in silicone pads
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- Re: ATM testing for sphere
- From: "Arun Sahasrabuddhe" <balusas@hotmail.com>
- Re: ATM Patience is the dirty secret of astronomy. ( I think )
- From: "Arun Sahasrabuddhe" <balusas@hotmail.com>
- Fw: ATM Mechanical numbers for BVC for use in Plop
- From: "asm products" <asmprod@videotron.ca>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM CAD program, cheap or free?
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM ronchi question
- From: "AstroJack" <AstroJack@AVATM.com>
- Re: ATM ronchi question
- From: "AstroJack" <AstroJack@AVATM.com>
- Re: ATM ronchi question
- From: "AstroJack's Email!" <AstroJack@AVATM.com>
- Re: ATM ronchi question
- From: "AstroJack's Email!" <AstroJack@AVATM.com>
- Re: ATM Ultra-lite Dobs using foam core components
- From: "at making" <atmaking@hotmail.com>
- Re: ATM Ultra-lite Dobs using foam core components
- From: "at making" <atmaking@hotmail.com>
- ATM visual Paracorr
- From: "at making" <atmaking@hotmail.com>
- Re: ATM visual Paracorr
- From: "at making" <atmaking@hotmail.com>
- Re: ATM Glass Advice
- From: ATS <drummer@austin.rr.com>
- Re: ATM Glass Advice
- From: ATS <drummer@austin.rr.com>
- Re: ATM Glass Advice
- From: ATS <drummer@austin.rr.com>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM 3 inch reflector
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM 10" Flex Mirror
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM TUE - Ronchi
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM the right stuff
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM the right stuff
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM Question - Polishing compound suppliers.
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATMA - membership
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- ATM Fw: New virus warning
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM ronchi question
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM ronchi question
- From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
- Re: ATM How not to take apart cemented optics
- From: Bill Marriott <btk@pacbell.net>
- ATM re: Sharpie Test
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM Cerium oxide
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM bad seeing in about an hour
- From: "Bill Mitchell" <escape@velocity.net>
- ATM Mirror Quality advice
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM platform drive problems
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM first decent seeing for 16" f/3.9
- From: "Bill Mitchell" <escape@velocity.net>
- ATM Pyrex problems still?
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM Suppier of Heater Rope??
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM mirror coating
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM Cam closing devices
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM Cam closing devices
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM Dew Control and Fans
- From: "Bill Mitchell" <escape@velocity.net>
- Re: ATM Hogging out link
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM platform drive problems
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Dew Control and Fans
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM When to stop.
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Ultra-lite Dobs using foam core components
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Help Support a Floppy Mirror
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM faucault tester with telescope viewer
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Perfect Faucault outcomes?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Figure45 and win xp
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Another dangerous thought
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Looking for CCD-Shutters
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Scratches at 9 my grinding
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Suppier of Heater Rope??
- From: "Bill Thornley" <billt051@hotmail.com>
- Re: ATM Cam closing devices
- From: "Bill Thornley" <billt051@hotmail.com>
- Fw: ATM Cam closing devices
- From: "Bill Thornley" <billt051@hotmail.com>
- Re: ATM CeO slurry pump
- From: Bob Bond <rgb@ncube.com>
- Re: ATM much magnification
- From: Bob Bunge <bbunge@ladyandtramp.com>
- Re: ATM Dew Control and Fans
- From: Bob Bunge <bbunge@ladyandtramp.com>
- ATM Fuel cells in the future?
- From: Bob Bunge <bbunge@ladyandtramp.com>
- Re: ATM Speaking of testing...
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM ultralight flexible mirror
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM battery and battery loader
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM re-using CeO
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Re: hole cutters
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM focualt image
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Plaster of Paris Tool question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM faucault tester with telescope viewer
- From: "Bob May" <bobmay@nethere.com>
- Re: Circuit board construction for the ATMer...?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Zero-Obstruction Newtonian
- From: "Bob May" <bobmay@nethere.com>
- Re: Round the barrel, Was - ATM Star testing
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Zero-obstruction Newtonian
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Glass Advice
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Zero-obstruction Newtonian
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Zero-obstruction Newtonian
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Where is Bryan Greer
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Suppier of Heater Rope??
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Skewers
- From: "Bob May" <bobmay@nethere.com>
- Re: Extreme long F ratio was Re: ATM 16" F/33 valid design?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Wire Spiders
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Pitch lap prob
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Non lasing lerer diode Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Non lasing lerer diode Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM much magnification
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM grind or polish
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM pinhole vs slit
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Newbie questions from Argentina
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing issues.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Question - Polishing compound suppliers.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing issues.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing issues - terms.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Aero Xenon Lens
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing issues.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Scratches at 9 my grinding
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM low pressure sodium lamp?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "Bob May" <bobmay@nethere.com>
- Re: ATMA - membership
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM What's needed for this resolution
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM town observatory
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Scratches at 9 my grinding
- From: "Bob May" <bobmay@nethere.com>
- Re: ATMA - membership
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Newbie asks dumb Focal Ratio Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Scratches at 9 my grinding
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM cerium oxide question....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Hartmann test and camera
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM ronchi question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Fw: New virus warning
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM ronchi question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Optical Flats
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM CeO slurry pump
- From: "Bob May" <bobmay@nethere.com>
- ATM cerium oxide question....
- From: "Bob Mazzullo" <rmazzullo@si.rr.com>
- RE: ATM cerium oxide question....
- From: "Bob Mazzullo" <rmazzullo@si.rr.com>
- RE: ATM cerium oxide question....
- From: "Bob Mazzullo" <rmazzullo@si.rr.com>
- ATM Thanks for your responses....
- From: "Bob Mazzullo" <rmazzullo@si.rr.com>
- ATM TUE - Ronchi
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- Re: ATM TUE - Ronchi
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- ATM Re: CAD
- From: "Bob Walker" <tac@i1.net>
- ATM Zero-Obstruction Newtonian
- From: "Bob Walker" <tac@i1.net>
- ATM Zero-obstruction Newtonian
- From: "Bob Walker" <tac@i1.net>
- Re: ATM Polishing issues - terms.
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Polishing issues - terms.
- From: Brad Davy <bdavy@fred.net>
- Re: ATM LIttle Glass Buttons
- From: Brian <blast@aloha.net>
- Re: ATM So you think you have an ugly mirror!
- From: Brian <blast@aloha.net>
- Re: ATM Another dangerous thought
- From: Brian <blast@aloha.net>
- Re: ATM Another dangerous thought
- From: Brian <blast@aloha.net>
- ATM Schmidt corrector coating.
- From: Brian Boothman <brian@boothman.net>
- ATM orion
- From: Brian Boothman <brian@boothman.net>
- Re: ATM orion
- From: Brian Boothman <brian@boothman.net>
- Re: ATM atm newbie - where to get glass?
- From: Brian Boothman <brian@boothman.net>
- Re: ATM fan capacity and velocity
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- ATM sources for thin mirror blanks?
- From: Carl Larson <vetenskapsman@yahoo.com>
- Re: ATM sources for thin mirror blanks?
- From: Carl Larson <vetenskapsman@yahoo.com>
- ATM Re: hole cutters
- From: CharlesMitchard@aol.com
- ATM re Bob
- From: CharlesMitchard@aol.com
- Re: ATM How not to take apart cemented optics
- From: "Chris" <chris@cervesza.demon.co.uk>
- Re: ATM Zero-Obstruction Newtonian
- From: Chris Plicht <chris@plicht.de>
- Re: Re: ATM Zero-Obstruction Newtonian
- From: Chris Plicht <chris@plicht.de>
- Re: ATM Is this really glass?
- From: Chris Plicht <chris@plicht.de>
- Re: ATM 16" F/33 valid design?
- From: Chris Plicht <chris@plicht.de>
- Re: ATM grind or polish
- From: Chris Plicht <chris@plicht.de>
- Re: ATM Message from List Owner
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- ATM Spectrohelioscopes @ http://imz064.ust.hk
- From: "Chris Westland" <westland@ust.hk>
- Re: ATM Schmidt corrector coating.
- From: "Chuck" <chucktaylor3@qwest.net>
- Re: ATM Wire Spiders
- From: Chuck <macc4@erie.net>
- ATM Suppier of Heater Rope??
- From: Chuck Faytak <macc4@erie.net>
- Re: ATM Another dangerous thought
- From: Chuck Faytak <macc4@erie.net>
- Last paper issue of ATMJ
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: Fans
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Surface smoothness
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: Ultra-lite Dobs using foam-core components
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Ultra-lite Dobs using foam core
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Surface smoothness
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Re: Fans
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Faux MMT
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Flux density
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Flux density
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Flux density
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Flux density
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Flux density
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Where is Bryan Greer
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM 16" F/33 valid design?
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Another dangerous thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Another dangerous thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Another dangerous thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Another dangerous thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Another dangerous thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Yet another interesting thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Another dangerous thought
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Maglev ideas (was Another Dangerous thought)
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM How not to take apart cemented optics
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM How not to take apart cemented optics
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM How not to take apart cemented optics
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: How not to take apart cemented lenses
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Rebuilding an Ealing 16" Cassegrain
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: Soft on Glue, de-cementing achromats
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM much magnification
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Refractor Design
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: Praying on the list
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Refractor Design
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM My new "death ray"
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM My new "death ray"
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: Subject: ATM platform drive problems
- From: "Chuck Shaw" <cshaw@ghg.net>
- ATM Focal Reducer Spacing?
- From: "Chuck Shaw" <cshaw@ghg.net>
- ATM Focal Reducer Spacing
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM Starliner EQ mount / Using Mels system
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM achromat glass source
- From: "Clayton Kessler" <ckessler@gatecom.com>
- Re: ATM How to cut holes in a metal tube?
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM structural advice solicited
- From: "clement.focuser" <clement.focuser@verizon.net>
- ATM PTFE filled J-B Weld
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM teflon powder
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Suppier of Heater Rope??
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Point Diffraction Interferometer?
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Another dangerous thought
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: Subject: Re: ATM Another dangerous thought
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: Subject: Re: ATM Another dangerous thought
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Another dangerous thought
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM the right stuff
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM the right stuff
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Need Mirror Tested in Southern Calif.
- From: "clement.focuser" <clement.focuser@verizon.net>
- ATM Bowed Flexure
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Bowed Flexure
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: Horseshoe Mounts (was ATM Refractor Design)
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM moving the lathe at AU last night
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Dew Control and Fans
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM threaded rod drive,
- From: "clement.focuser" <clement.focuser@verizon.net>
- ATM Fecker scope test report
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: Colin Caissie <optic@gwi.net>
- Re: ATM Zero-obstruction Newtonian
- From: Colin Caissie <optic@gwi.net>
- ATM flexed glass
- From: Colin Caissie <optic@gwi.net>
- ATM off axis or TCT scopes.
- From: Colin Caissie <optic@gwi.net>
- ATM Re: Where is Bryan Greer, apologies
- From: "comabereni" <comabereni@earthlink.net>
- Re: ATM Cam closing devices
- From: "ctaney" <ctaney2@home.com>
- ATM Large glass
- From: "D. Ray East" <dr.east@usa.net>
- Re: ATM going soft on glue
- From: "Dale Campbell" <campbeld@advion.com>
- Re: ATM Patience is the dirty secret of astronomy. ( I think )
- From: "Dale Campbell" <campbeld@advion.com>
- ATM touch up
- From: "Dan & Barb" <sunshine92@home.com>
- Re: ATM focualt image
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Glass Advice
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM for BinoNewton - need non-elliptical flats
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM My new "death ray"
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM CeO slurry pump
- From: Dan Cassaro <dcass@mediaone.net>
- ATM Re:Want to start a new ATM project but have questions
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- Re:ATM first decent seeing for 16" f/3.9
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- Re: ATM Question: topped down 16" f/3.9
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- Re: ATM Question: topped down 16" f/3.9
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- Re: ATM much magnification
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- RE: ATM much magnification
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- ATM Bought a Mirror...Now What?
- From: Dan Hein <flambeau@pctcnet.net>
- Re: ATM Plaster of Paris Tool question
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Plaster of Paris Tool question
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Ultra-lite Dobs using foam core components
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM PTFE filled J-B Weld
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Re: Where is Bryan Greer
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Another dangerous thought
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM 16" F/33 - Patents
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Making Sono-tube stiff
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Another dangerous thought
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Polishing issues.
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Spring Counterweight Page for my Travelscope....
- From: "Dark Skies" <darkskies38@hotmail.com>
- ATM More on the construction of my GEM
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM More on the construction of my GEM
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM .75" secondary
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- ATM Refractor Design
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- Re: ATM Refractor Design
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- Re: ATM Refractor Design
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- Re: ATM Refractor Design
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- Re: ATM Refractor Design
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- Re: ATM Refractor Design
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- ATM structural advice solicited
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Help Support a Floppy Mirror
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Glass Advice
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Patience is the dirty secret of astronomy. ( I think )
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM My new "death ray"
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Fuel cells in the future?
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Fuel cells in the future?
- From: Dave Sopchak <dsopchak@mac.com>
- ATM TDE or TUE......??????
- From: "Dave Stevens" <davestevens@myvine.com>
- ATM Re: TDE or TUE......??????
- From: "Dave Stevens" <davestevens@myvine.com>
- Re: ATM structural advice solicited
- From: "David File" <davefile@usa.net>
- ATM 8" mirror thickness
- From: "David File" <davefile@usa.net>
- Re: ATM How to cut holes in a metal tube?
- From: David Sleeter <d.sleeter@verizon.net>
- ATM Protective Coating for Waterjet Cutting a Mirror?
- From: David Sleeter <d.sleeter@verizon.net>
- ATM Need Mirror Tested in Southern Calif.
- From: David Sleeter <d.sleeter@verizon.net>
- Re: ATM Re: How not to take apart...Enough is Enough.
- From: David Sleeter <d.sleeter@verizon.net>
- Re: ATM Skewers
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM Wire Spiders
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM Wire Spiders
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM Making Sono-tube stiff
- From: David Smith <areopagus125@yahoo.com>
- ATM Bob Goff
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- Re: ATM Hogging out link
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM platform drive problems
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Looking for CCD-Shutters
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Photo enlarger lenses
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Aero Xenon Lens
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Photo enlarger lenses
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Dew Control and Fans
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM CeO slurry pump
- From: Del Stanton <sd20@earthlink.net>
- ATM ultralight flexible mirror
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- ATM making a mirror blank of thin glass discs
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- Re: ATM making a mirror blank of thin glass discs
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- Re: ATM 10" Flex Mirror
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- Re: ATM Question: topped down 16" f/3.9
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- Re: ATM Question: topped down 16" f/3.9
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- Re: ATM Plop units question
- From: "Dennis Nikitin" <ndenis@sarkor.com>
- ATM Old Mirrors for Testing
- From: Dennis Woos <wooscons@sover.net>
- ATM 10" Flex Mirror
- From: Dennis Woos <wooscons@sover.net>
- Re: ATM CCD on the 11.2" F/2
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM 16" F/33 valid design?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM 16" F/33 valid design?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM 16" F/33 valid design?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM 16" F/33 valid design?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Another dangerous thought
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Another dangerous thought
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM knew better
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: Subject: Re: ATM Another dangerous thought
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Another dangerous thought
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Another dangerous thought
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Another dangerous thought
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM much magnification
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM pinhole vs slit
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Optical Tooling
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM What's needed for this resolution
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM My new "death ray"
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Radioactive CeO and the Archive
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM ronchi question
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM My new "death ray"
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Cerium oxide
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Announcement - Mid-Atlantic Mirror Making - UPDATE
- From: "Don R Surles" <Don.R.Surles-1@usa.dupont.com>
- RE: ATM Another dangerous thought... Getting OT
- From: "donovan" <donovan@bravoz.com>
- RE: ATM Another dangerous thought
- From: "donovan" <donovan@bravoz.com>
- RE: Subject: Re: ATM Another dangerous thought
- From: "donovan" <donovan@bravoz.com>
- Re: ATM How to cut holes in a metal tube?
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Flux density
- From: "Doug Homoelle" <doughomoelle@hotmail.com>
- Re: ATM Balls
- From: Doug Tanaka <dtanaka@seanet.com>
- Re: ATM Cam closing devices
- From: Doug Tanaka <dtanaka@seanet.com>
- Re: ATM Cam closing devices
- From: Doug Tanaka <dtanaka@seanet.com>
- Re: ATM moving the lathe at AU last night
- From: Doug Tanaka <dtanaka@seanet.com>
- Re: ATM dew heaters & air turbulance
- From: Doug Tanaka <dtanaka@seanet.com>
- Re: ATM Dew Control and Fans
- From: Doug Tanaka <dtanaka@seanet.com>
- ATM mirror round robin testing
- From: "Douglas S Angle" <Douglas.S.Angle@can.dupont.com>
- Re: ATM 18 inch telescope
- From: Ed Taychert <elt@irony.com>
- ATM: 10" Sital project - 9 micron grind seen under the microscope.
- From: Ed Taychert <elt@irony.com>
- Re: ATM Strehl
- From: "Edmund Stevens" <ed@flyingscopes.com>
- Re: ATM Wire Spiders
- From: "Edmund Stevens" <ed@flyingscopes.com>
- ATM CeO slurry pump
- From: "Edmund Stevens" <ed@flyingscopes.com>
- Re: ATM CeO slurry pump
- From: "Edmund Stevens" <ed@flyingscopes.com>
- Re: ATM Glass Advice
- From: "Eric Claussen" <etclaussen1@yahoo.com>
- Re: ATM Another dangerous thought
- From: Eric Claussen <etclaussen1@yahoo.com>
- Re: ATM knew better
- From: Eric Claussen <etclaussen1@yahoo.com>
- Re: ATM Patience is the dirty secret of astronomy. ( I think )
- From: "Eric Claussen" <etclaussen1@yahoo.com>
- Re: ATM cerium oxide question....
- From: "Eric Claussen" <etclaussen1@yahoo.com>
- Fw: ATM cerium oxide question....
- From: "Eric Claussen" <etclaussen1@yahoo.com>
- Re: ATM CeO slurry pump
- From: "Eric Claussen" <etclaussen1@yahoo.com>
- Re: ATM fork mount motor drives
- From: "Eric Royer" <eroyer@club-internet.fr>
- Re: ATM Grinding Wet is NOT OK!
- From: Eric Smith <eric@nutstreet.net>
- Re: ATM Mechanical numbers for BVC for use in Plop
- From: Fabio Pettinati <fabio@best.com>
- ATM Date: Sun, 20 Jan 2002 18:24:48 -0000
- From: "francis milsom" <fmilsom@lineone.net>
- Re: ATM How to cut holes in a metal tube?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Why a star lap?
- From: "Frank Ward" <thewards@mindspring.com>
- Fw: ATM how to cut a holes in a metal tube
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM LIttle Glass Buttons
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Plaster of Paris Tool question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM retouching
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Minimum angle between altitude teflon pads
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Ultra-lite Dobs using foam core components
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Minimum angle between altitude teflon pads
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Mirror Quality advice
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Minimum angle between altitude teflon pads
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM sleek or scratch?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM microfacetting in starlap pattern
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Perfect Faucault outcomes?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Faux MMT
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Yet another Tool Question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Circuit board construction for the ATMer...?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM More on the construction of my GEM
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM making a mirror blank of thin glass discs
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Old Mirrors for Testing
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Glass Advice
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM touch up
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Slightly hyperboloidal, but is it usable?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Question: topped down 16" f/3.9
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM stopping a newtonian.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Q: Fog-streaks during polishing
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Refractor Design
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Skewers
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM mirror from hell - help
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM achromat glass source
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM 16" F/33 valid design?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM 16" F/33 valid design?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Re: Where is Bryan Greer
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Making JB Weld Gears
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Making JB Weld Gears
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Is Richard realy back.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM TDE or TUE......??????
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Subject: Re: ATM Another dangerous thought
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Subject: Re: ATM Another dangerous thought
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Cam closing devices
- From: "Frank Ward" <thewards@mindspring.com>
- ATM posting vs chatting
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Pit counting
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM testing for sphere
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Cam closing devices
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM much magnification
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Rebuilding an Ealing 16" Cassegrain
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM How not to take apart cemented optics
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Aero Xenon Lens
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM atm, visit to France
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM much magnification
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Polishing issues.
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Re:Sharpie test
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM removing central core
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Polishing issues - terms.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM cerium oxide question....
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Cerium oxide
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Newbie asks dumb Focal Ratio Question
- From: "Garrett Heaver" <heda@btinternet.com>
- RE: ATM Newbie asks dumb Focal Ratio Question
- From: "Garrett Heaver" <heda@btinternet.com>
- RE: ATM cerium oxide question....
- From: "Garrett Heaver" <heda@btinternet.com>
- RE: ATM cerium oxide question....
- From: "Garrett Heaver" <heda@btinternet.com>
- ATM Eyepieces ?
- From: "Garrett Heaver" <heda@btinternet.com>
- ATM unusual shaped mirror
- From: "gary burford" <fornax@breathe.com>
- Re: ATM Suppier of Heater Rope??
- From: Gary Woods <gwoods@albany.net>
- Re: ATM bad seeing in about an hour
- From: George Anderson <georgea@cam.org>
- Re: ATM LIttle Glass Buttons
- From: George Anderson <georgea@cam.org>
- Re: ATM Mirror Quality advice
- From: George Anderson <georgea@cam.org>
- Re: ATM NOT AN AD, but I thought some might find this design interesting....
- From: George Anderson <georgea@cam.org>
- Re: ATM So you think you have an ugly mirror!
- From: George Anderson <georgea@cam.org>
- Re: ATM Mechanical numbers for BVC for use in Plop
- From: George Anderson <georgea@cam.org>
- Re: ATM Another dangerous thought
- From: George Anderson <georgea@cam.org>
- Re: ATM Another dangerous thought
- From: George Anderson <georgea@cam.org>
- Re: ATM tangential fans
- From: George Anderson <georgea@cam.org>
- Re: ATM Photo enlarger lenses
- From: George Anderson <georgea@cam.org>
- Re: ATM enlarger lens
- From: George Anderson <georgea@cam.org>
- ATM My first carbon fiber tube
- From: "George Blahun Jr." <ks1u@prodigy.net>
- ATM An adaptation of Gary Seronik's Curved Spider design.
- From: Gil or Lisa McFarlane <doctorgil@peoplepc.com>
- Re: ATM An adaptation of Gary Seronik's Curved Spider design.
- From: Gil or Lisa McFarlane <doctorgil@peoplepc.com>
- ATM: cerium oxide and barnsite
- From: Glen Youman <gleny@starstream.net>
- RE: ATM 18 inch telescope
- From: "Good, Donald" <dgood@aha.org>
- RE: ATM Flux density
- From: "Good, Donald" <dgood@aha.org>
- RE: ATM More on the construction of my GEM
- From: "Good, Donald" <dgood@aha.org>
- RE: ATM Zero-obstruction Newtonian
- From: "Good, Donald" <dgood@aha.org>
- ATM Looking for CCD-Shutters
- Re: ATM Looking for CCD-Shutters
- Re: ATM cerium oxide question....
- Re: ATM LIttle Glass Buttons
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Re: Telescope Making Class
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM making a mirror blank of thin glass discs
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Suppier of Heater Rope??
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM much magnification
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM much magnification
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM atm, visit to France
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Newbie questions from Argentina
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM cooling worked glass
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM cooling worked glass
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM cerium oxide question....
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM moving the lathe at AU last night
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM moving the lathe at AU last night
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM moving the lathe at AU last night
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM moving the lathe at AU last night
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM focualt image
- From: "Harold" <adams@rmci.net>
- Re: ATM focualt image
- From: "Harold" <adams@rmci.net>
- Re: ATM focualt image
- From: "Harold" <adams@rmci.net>
- ATM sleeks/scratches?
- From: "Harold" <adams@rmci.net>
- ATM sleek or scratch?
- From: "Harold" <adams@rmci.net>
- Re: ATM sleek or scratch?
- From: "Harold" <adams@rmci.net>
- ATM mirror coating
- From: "Harold" <adams@rmci.net>
- ATM testing for sphere
- From: "Harold" <adams@rmci.net>
- Re: ATM testing for sphere
- From: "Harold" <adams@rmci.net>
- ATM ronchi question
- From: "Harold" <adams@rmci.net>
- Re: ATM ronchi question
- From: "Harold" <adams@rmci.net>
- Re: ATM ronchi question
- From: "Harold" <adams@rmci.net>
- Re: ATM ronchi question
- From: "Harold" <adams@rmci.net>
- Re: ATM ronchi question
- From: "Harold" <adams@rmci.net>
- Re: ATM ronchi question
- From: "Harold" <adams@rmci.net>
- ATM first decent seeing for 16" f/3.9
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM Zero-Obstruction Newtonian
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- ATM Question: topped down 16" f/3.9
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM Question: stopped down 16" f/3.9
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM Question: topped down 16" f/3.9
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM much magnification
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: Hermit <klowther@cisnet.com>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: Hermit <klowther@cisnet.com>
- Re: ATM Schmidt Camera w/ CCD?
- From: Hermit <klowther@cisnet.com>
- Re: ATM sleek or scratch?
- From: Hermit <klowther@cisnet.com>
- Re: ATM Re: Telescope Making Class
- From: Hermit <klowther@cisnet.com>
- Re: ATM So you think you have an ugly mirror!
- From: Hermit <klowther@cisnet.com>
- Re: ATM making a mirror blank of thin glass discs
- From: Hermit <klowther@cisnet.com>
- Re: ATM Zero-obstruction Newtonian
- From: Hermit <klowther@cisnet.com>
- Re: ATM Suppier of Heater Rope??
- From: Hermit <klowther@cisnet.com>
- Re: ATM Suppier of Heater Rope??
- From: Hermit <klowther@cisnet.com>
- Re: ATM Suppier of Heater Rope??
- From: Hermit <klowther@cisnet.com>
- Re: ATM polishing problem
- From: Hermit <klowther@cisnet.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: Hermit <klowther@cisnet.com>
- Re: ATM stopping a newtonian.
- From: Hermit <klowther@cisnet.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: Hermit <klowther@cisnet.com>
- Re: ATM mirror from hell - help
- From: Hermit <klowther@cisnet.com>
- Re: ATM Re: Where is Bryan Greer, apologies
- From: Hermit <klowther@cisnet.com>
- Re: ATM Making JB Weld Gears
- From: Hermit <klowther@cisnet.com>
- Re: ATM 16" F/33 valid design?
- From: Hermit <klowther@cisnet.com>
- Re: ATM Another dangerous thought
- From: Hermit <klowther@cisnet.com>
- Re: ATM 16" F/33 - Patents
- From: Hermit <klowther@cisnet.com>
- Re: ATM mirror coating
- From: Hermit <klowther@cisnet.com>
- Re: ATM testing for sphere
- From: Hermit <klowther@cisnet.com>
- Re: ATM How not to take apart cemented optics. :-)
- From: Hermit <klowther@cisnet.com>
- Re: ATM pinhole vs slit
- From: Hermit <klowther@cisnet.com>
- Re: ATM going soft on glue
- From: Hermit <klowther@cisnet.com>
- Re: ATM Newbie questions from Argentina
- From: Hermit <klowther@cisnet.com>
- Re: ATM cooling worked glass
- From: Hermit <klowther@cisnet.com>
- Re: ATM Polishing issues.
- From: Hermit <klowther@cisnet.com>
- Re: ATM Polishing issues.
- From: Hermit <klowther@cisnet.com>
- Re: ATM Scratches at 9 my grinding
- From: Hermit <klowther@cisnet.com>
- Re: ATM Polishing issues - terms.
- From: Hermit <klowther@cisnet.com>
- Re: ATM Scratches at 9 my grinding
- From: Hermit <klowther@cisnet.com>
- ATM Re: detectors
- From: Hermit <klowther@cisnet.com>
- ATM detectors
- From: Hermit <klowther@cisnet.com>
- Re: ATM Scratches at 9 my grinding
- From: Hermit <klowther@cisnet.com>
- Re: ATM Dew Control and Fans
- From: Hermit <klowther@cisnet.com>
- Re: ATM ronchi testing the 14.6 x .645" F 4.6
- From: Hermit <klowther@cisnet.com>
- Re: ATM Fuel cells in the future?
- From: Hermit <klowther@cisnet.com>
- Re: ATM ronchi question
- From: Hermit <klowther@cisnet.com>
- ATM How to cut holes in a metal tube?
- From: "Holmes, Michael H." <MHolmes@tigr.org>
- Re: ATM When to stop.
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM platform drive problems
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM making a mirror blank of thin glass discs
- From: Hugues.Laroche@ses-astra.com
- Re: ATM making a mirror blank of thin glass discs
- From: Hugues.Laroche@ses-astra.com
- Re: ATM 8" mirror thickness
- From: Hugues.Laroche@ses-astra.com
- Re: ATM making a mirror blank of thin glass discs
- From: Hugues.Laroche@ses-astra.com
- Re: ATM Is this really glass?
- From: Hugues.Laroche@ses-astra.com
- ATM foam,glass,and wholes
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM polishinh compounds
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM a crazy idea
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM the right stuff
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM add some fairy-dust
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM going soft on glue
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM when yer hot yer hot
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM Rons Constant
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM generations
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- Re: ATM Platform Drive Problems
- From: "J&S" <jsstars@worldnet.att.net>
- Re: ATM first decent seeing for 16" f/3.9
- From: "J&S" <jsstars@worldnet.att.net>
- ATM Small Secondaries for 3 inch Newts.
- From: "J&S" <jsstars@worldnet.att.net>
- ATM WANTED!
- From: "J&S" <jsstars@worldnet.att.net>
- ATM CCD on the 11.2" F/2 Was 11.2" F/2 Primary testing questions
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM focualt image
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM CCD on the 11.2" F/2
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM focualt image
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Change of Plans, F/2 -> F/3.2
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM Hogging out link
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM 1/2 in plate max diameter usefullness?
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM Making JB Weld Gears
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Dew Control and Fans
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Battery Power
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Making Sono-tube stiff
- From: "James Meenan" <jmeenan@worldnet.att.net>
- ATM My new "death ray"
- From: "James Meenan" <jmeenan@worldnet.att.net>
- Re: ATM My new "death ray"
- From: "James Meenan" <jmeenan@worldnet.att.net>
- ATM Mirror Grinder Machine
- From: James P Crombie <jpcrombie@islandtelecom.com>
- Re: ATM moving the lathe at AU last night
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM grinding machine progress report.
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Telescope progress report
- From: "James Taylor" <u2pilot@satx.rr.com>
- Re: ATM 3 in blank
- From: "James Taylor" <u2pilot@satx.rr.com>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Why a star lap?
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Strehl
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Hyperboloid
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Plaster of Paris Tool question
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Star testing
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM polishing problem
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM polishing problem
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Slightly hyperboloidal, but is it usable?
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM TDE or TUE......??????
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM much magnification
- From: "James W. Burrows" <burrjaw@earthlink.net>
- ATM New Version of Sixtests.
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Hartmann test and camera
- From: "James W. Burrows" <burrjaw@earthlink.net>
- ATM February Issue.
- From: "James W. Burrows" <burrjaw@earthlink.net>
- ATM battery and battery loader
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM combination Cheshire sight tube
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM CAD program, cheap or free?
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM platform drive problems
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: Subject: ATM platform drive problems
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM Re: Where is Bryan Greer, apologies
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM fan capacity and velocity
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM tangential fans
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM Fw: Fan Calculations (was fan capacity and velocity)
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM Ground Board?
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM formula
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM Re: atm-digest V1 #2898, Battery and charger question
- From: Jarvis Krumbein <jkoptic@juno.com>
- ATM Re: atm-digest V1 #2937, making "Shorties" from Jim L
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: ATM Plaster of Paris Tool question
- From: "Jean-Guy Moreau" <jgmoreau@lino.com>
- Re: ATM making a mirror blank of thin glass discs
- From: "Jean-Guy Moreau" <jgmoreau@lino.com>
- Re: ATM making a mirror blank of thin glass discs
- From: "Jean-Guy Moreau" <jgmoreau@lino.com>
- ATM Fused glass lightweight mirrors
- From: "Jean-Guy Moreau" <jgmoreau@lino.com>
- Re: ATM Scratches at 9 my grinding
- From: "Jean-Guy Moreau" <jgmoreau@lino.com>
- ATM Re: atm-digest V1 #2915
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Glass Advice
- From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
- Re: ATM Glass Advice
- From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
- cell design and uneven loads [was: Re: ATM Glass Advice]
- From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
- Re: ATM low pressure sodium lamp?
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM Zero-Obstruction Newtonian
- From: Jeff Morgan <jeffmorgan@mindspring.com>
- ATM Star testing
- Re: ATM Polishing issues - terms.
- Re: ATM Polishing issues - terms.
- Re: ATM ultralight flexible mirror
- From: "jep" <jp.jep@verizon.net>
- ATM Wire Spiders
- From: Jerry Dove <jldove@mediaone.net>
- ATM re: wire spiders
- From: Jerry Dove <jldove@mediaone.net>
- ATM Removing core
- From: "Jim Havens" <jhavens@evansville.net>
- Re: ATM structural advice solicited
- From: "Jim Miller" <jim@jtmiller.com>
- ATM Schmidt Camera w/ CCD?
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Skewers
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Wire Spiders
- From: "Jim Miller" <jim@jtmiller.com>
- ATM Ground Board?
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Ground Board?
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Dew Control and Fans
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Alpha Decay (Was CeO and Radon)
- From: "Jim Miller" <jim@jtmiller.com>
- ATM OT: Happy New Year
- From: Joe Campbell <joe@esper.com>
- ATM knew better
- From: Joe Curran <jcurran@asymtek.com>
- Re: ATM bad seeing in about an hour
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: Circuit board construction for the ATMer...?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM 16" F/33 valid design?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM 16" F/33 valid design?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM 16" F/33 valid design?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM town observatory
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM first decent seeing for 16" f/3.9
- From: Joe Mirando <make.a.scope@snet.net>
- ATM Glass-pusher survey
- From: Joe Mirando <make.a.scope@snet.net>
- ATM Re: Glass-pusher survey
- From: Joe Mirando <make.a.scope@snet.net>
- Re: ATM Message from List Owner
- From: Joe Mirando <make.a.scope@snet.net>
- Re: ATM much magnification
- From: "John D. Upton" <jd-upton@texas.net>
- Re: ATM re: Sharpie Test
- From: "John D. Upton" <jd-upton@texas.net>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "John D. Upton" <jd-upton@texas.net>
- Re: ATM ronchi question
- From: "John D. Upton" <jd-upton@texas.net>
- Re: ATM ronchi question
- From: "John D. Upton" <jd-upton@texas.net>
- ATM achromat glass source
- From: "John E.Pike" <jp.jep@verizon.net>
- Re: ATM Wire Spiders
- From: "John E.Pike" <jp.jep@verizon.net>
- Re: ATM How not to take apart cemented optics. :-)
- From: "John E.Pike" <jp.jep@verizon.net>
- ATM the good,the bad and im ugly,
- From: "John E.Pike" <jp.jep@verizon.net>
- ATM threaded rod drive,
- From: "John E.Pike" <jp.jep@verizon.net>
- Re: ATM Looking for CCD-Shutters
- From: "John Hills" <jhills@tpgi.com.au>
- ATM Starliner EQ mount / Using Mels system
- From: John Hutto <jdhutto@yahoo.com>
- ATM Sorry for the double post on the starliner - ignore second post
- From: John Hutto <jdhutto@yahoo.com>
- ATM Retrofitting Starliner with Mels setup/ load capacity
- From: John Hutto <jdhutto@yahoo.com>
- ATM Re: Cerium oxide question
- From: "John Lynch" <john_p_lynch@hotmail.com>
- ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "John Murray" <onslow@austarnet.com.au>
- ATM Followup to " Some interpretation of ronchi and foucault pictures"
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Followup to " Some interpretation of ronchi and foucault pictures"
- From: "John Murray" <onslow@austarnet.com.au>
- ATM fork mount motor drives
- From: John Scott McLean <jsmclean@gis.net>
- Re: ATM fork mount motor drives
- From: John Scott McLean <jsmclean@gis.net>
- ATM Plaster of Paris substitute
- From: John Scott McLean <jsmclean@gis.net>
- ATM Photo enlarger lenses
- From: John Scott McLean <jsmclean@gis.net>
- ATM enlarger lens
- From: John Scott McLean <jsmclean@gis.net>
- Re: ATM Ultra-lite Dobs using foam core components
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Re: Fans
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Glass Advice
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Suppier of Heater Rope??
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Another dangerous thought
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Yet another interesting thought
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Non lasing lerer diode Question
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Refractor Design
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Dream Machine (was Horseshoe Mounts)
- From: John Swenson <johnswenson1@attbi.com>
- Re: Horseshoe Mounts (was ATM Refractor Design)
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Hartmann test and camera
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Hartmann test and camera
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Hartmann test and camera
- From: John Swenson <johnswenson1@attbi.com>
- ATM TDE related to polishing duration?
- From: Jon Wilson <jwilson7@ix.netcom.com>
- ATM Question - Polishing compound suppliers.
- From: Jon Wilson <jwilson7@ix.netcom.com>
- ATM grind or polish
- From: Jon Wilson <jwilson7@ix.netcom.com>
- RE: ATM Speaking of testing...
- From: Joseph Goins <jb_goins@yahoo.com>
- ATM Plaster of Paris Tool question
- From: Joseph Goins <jb_goins@yahoo.com>
- Re: ATM Plaster of Paris Tool question
- From: Joseph Goins <jb_goins@yahoo.com>
- Re: ATM Why a star lap? Now machine grinding..
- From: Joseph Goins <jb_goins@yahoo.com>
- ATM Yet another Tool Question
- From: Joseph Goins <jb_goins@yahoo.com>
- ATM Steel washer tool
- From: Joseph Goins <jb_goins@yahoo.com>
- ATM Why a star lap?
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Why a star lap?
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Why a star lap?
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Why a star lap?
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Why a star lap?
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Why a star lap? Now machine grinding..
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Where is Bryan Greer
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Where is Bryan Greer
- From: Joseph Johnston <usc@sover.net>
- Re: ATM machine overarm pivot & lap holder ideas
- From: Joseph Johnston <usc@sover.net>
- ATM Hartmann test and camera
- From: Joseph Johnston <usc@sover.net>
- ATM dew heaters & air turbulance
- From: Joseph Johnston <usc@sover.net>
- ATM my party removal program & info
- From: Joseph Johnston <usc@sover.net>
- ATM retouching
- From: jsgrmfg@gracemfg.com
- ATM teflon powder
- From: jsgrmfg@gracemfg.com
- ATM 3 inch reflector
- From: jsgrmfg@gracemfg.com
- Re: ATM 11.2" F/2 Primary testing questions :)
- Re: ATM LIttle Glass Buttons
- From: Kartik Patel <k_patel@vsnl.com>
- RE: ATM Help Support a Floppy Mirror
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: "Ken Bertapelle" <kenb@cqg.com>
- Re: ATM Zero-Obstruction Newtonian
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Perfect Faucault outcomes?
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM TDE related to polishing duration?
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM .75" secondary
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: Round the barrel, Was - ATM Star testing
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM mirror from hell - help
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM TDE or TUE......??????
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM fan capacity and velocity
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM the right stuff
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM the right stuff
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM testing for sphere
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM for BinoNewton - need non-elliptical flats
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM much magnification
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM grind or polish
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM How not to take apart cemented optics
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Polishing issues.
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM atm newbie - where to get glass?
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Polishing issues.
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM low pressure sodium lamp?
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Scratches at 9 my grinding
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM sources for thin mirror blanks?
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM town observatory
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM cerium oxide question....
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM cerium oxide question....
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM moving the lathe at AU last night
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM cerium oxide question....
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Scope mount
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM moving the lathe at AU last night
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM ronchi question
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM ronchi question
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Optical Flats
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM fan capacity and velocity
- From: "ken mattern" <longeye@surfari.net>
- ATM Grinding machine
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: Want to start a new ATM project but have questions
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Refractor Design
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Another dangerous thought
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Polishing issues.
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Questions on The Perfect Machine
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Aero Xenon Lens
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Polishing issues.
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "Kenneth Hunter" <kb7h@onemain.com>
- Re: ATM much magnification
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM low pressure sodium lamp?
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM DIY C5 mobile telescope
- From: Kevin Jensen <ktjensen@peoplepc.com>
- Re: ATM LIttle Glass Buttons
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM How to cut holes in a metal tube?
- From: Kevin M Whitefire <kwhitefire@juno.com>
- ATM Hyperboloid
- From: Kevin M Whitefire <kwhitefire@juno.com>
- ATM Slightly hyperboloidal, but is it usable?
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Grit steps question...
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Another dangerous thought
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Pitch lap prob
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Another dangerous thought
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Another dangerous thought
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Pit counting
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Newbie questions from Argentina
- From: Kevin M Whitefire <kwhitefire@juno.com>
- ATM Alpha Decay (Was CeO and Radon)
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM How not to take apart cemented optics
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM Telescope Optics Workshop
- From: "Kreig McBride" <kmcbride@memes.com>
- RE: ATM Another dangerous thought
- From: "Krug, Regis" <regis_krug@mentorg.com>
- RE: ATM stopping a newtonian.
- From: "Launie, Kenneth J" <LAUNIEK@polaroid.com>
- Re: ATM Making barlow
- From: Lawrence Sayre <lsayre@apk.net>
- Re: ATM LIttle Glass Buttons
- From: Leftfieldstar@aol.com
- Re: ATM Strehl
- From: Leftfieldstar@aol.com
- Re: ATM LIttle Glass Buttons
- From: Leftfieldstar@aol.com
- Re: ATM platform drive problems
- From: Leftfieldstar@aol.com
- Re: ATM Yet another Tool Question
- From: Leftfieldstar@aol.com
- Re: ATM Balls
- From: Leftfieldstar@aol.com
- Re: ATM Flux density
- From: Leftfieldstar@aol.com
- Re: ATM Mirr-O-Matic
- From: Leftfieldstar@aol.com
- Re: ATM Got Glass?
- From: Leftfieldstar@aol.com
- Re: ATM Anodized Adherence
- From: Leftfieldstar@aol.com
- Re: ATM fan capacity and velocity
- From: Leftfieldstar@aol.com
- Re: ATM Non lasing lerer diode Question
- From: Leftfieldstar@aol.com
- ATM Klevtsov design
- From: Leftfieldstar@aol.com
- ATM auto Foucault
- From: Leftfieldstar@aol.com
- ATM Making diagonals
- ATM Which astronomy group?
- ATM Is this really glass?
- Re: ATM Is this really glass?
- ATM Aspheric lens
- ATM Making barlow
- ATM What's needed for this resolution
- Re: ATM Refractor Design
- ATM Making shorties
- Re: ATM CeO slurry pump
- Re: ATM ronchi question
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
- Re: ATM Supper of Heat Rope??
- From: "Mark" <mark_f_bass@hotmail.com>
- ATM TDE related to polishing duration?
- From: "Mark Clement" <maclement@4art.com>
- ATM Anti-vibration foam, a suggestion
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM CAD program, cheap or free?
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM microfacetting in starlap pattern
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Teflon powder
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Zero-Obstruction Newtonian
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Zero-Obstruction Newtonian
- From: "Mark D. Holm" <mdholm@telerama.com>
- RE: ATM Flux density
- From: "Mark D. Holm" <mdholm@telerama.com>
- RE: ATM Flux density
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Flux density
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM making a mirror blank of thin glass discs
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Point Diffraction Interferometer?
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Point Diffraction Interferometer?
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Is this really glass?
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Plop units question
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Mechanical numbers for BVC for use in Plop
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Handy unit converter program for Windows
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Non lasing lerer diode Question
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM How not to take apart cemented optics
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM going soft on glue
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM atm newbie - where to get glass?
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM going soft on glue
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM effective balancing weight for a dob
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATMA - membership
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM cerium oxide question....
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM foam ear plugs as vibration dampers
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATMJ
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Point Diffraction Interferometer?
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM So you think you have an ugly mirror!
- From: "Mark VandeWettering" <markv@pixar.com>
- Re: ATM Which astronomy group?
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM So you think you have an ugly mirror!
- From: Marty.T@t-online.de (Martin Trittelvitz)
- ATM Mirr-O-Matic
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Is this really glass?
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Re: Glass-pusher survey
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Some interpretation of ronchi and foucault pictureswanted please..............
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Patience is the dirty secret of astronomy. ( I think )
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM cerium oxide question....
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM cerium oxide question....
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Optical Flats
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Cerium oxide
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM cerium oxide question....
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- Re: ATM cerium oxide question....
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- RE: ATM NEWT for windows layout for my 3 in scope, illumination diameter large enough?
- From: "Martyn, Andrew" <martyn@rlmsystems.com.au>
- Re: ATM LIttle Glass Buttons
- From: "Matt Considine" <matt@considine.net>
- Re: ATM LIttle Glass Buttons
- From: "Matt Considine" <matt@considine.net>
- RE: ATM An adaptation of Gary Seronik's Curved Spider design.
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- RE: ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- RE: ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- RE: ATM Speaking of testing...
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM 18 inch telescope
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM When to stop.
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM unusual shaped mirror
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Help Support a Floppy Mirror
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM polishinh compounds
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM polishinh compounds
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Zero-Obstruction Newtonian
- From: "Mel Bartels" <mbartels@efn.org>
- RE: Round the barrel, Was - ATM Star testing
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Glass Advice
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM flatten outer two (parabolizing)
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Another dangerous thought
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Yet another interesting thought
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Yet another interesting thought
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM much magnification
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM much magnification
- From: "Mel Bartels" <mbartels@efn.org>
- ATM comments on diffraction limited
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM re: Sharpie Test
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM the good,the bad and im ugly,
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM My new "death ray"
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM My new "death ray"
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM visual Paracorr
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM 18 inch telescope
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Balls
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Perfect Faucault outcomes?
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Strehl
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Re: Telescope Making Class
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM PTFE filled J-B Weld
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Mirr-O-Matic
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Suppier of Heater Rope??
- From: Michael Lindner <mikell@optonline.net>
- ATM Skewers
- From: Michael Lindner <mikell@optonline.net>
- ATM Message from List Owner
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM atm newbie - where to get glass?
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM How not to take apart cemented optics
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Starliner EQ mount / Using Mels system
- From: Michael Lindner <mikell@optonline.net>
- ATM cam clamps
- From: Michael Lindner <mikell@optonline.net>
- Re: Horseshoe Mounts (was ATM Refractor Design)
- From: Michael Lindner <mikell@optonline.net>
- Re: ATMJ
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Optical Flats
- From: Michael Lindner <mikell@optonline.net>
- ATM Grinding Wet is NOT OK!
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Faux MMT
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Slightly hyperboloidal, but is it usable?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Question: stopped down 16" f/3.9
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM 16" F/33 valid design?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM 16" F/33 valid design?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM 16" F/33 valid design?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM comments on diffraction limited
- From: Michael Peck <mpeck1@ix.netcom.com>
- Fw: ATM Speaking of testing...
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM How to cut holes in a metal tube?
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM LIttle Glass Buttons
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM focualt image
- From: spooner@page.az.net (Michael Spooner)
- Want to start a new ATM project but have questions
- From: "Michael Stephan" <mstephan@kconline.com>
- ATM HTML to ASCII change
- From: "Michael Stephan" <mstephan@kconline.com>
- ATM Format test-that should work better
- From: "Michael Stephan" <mstephan@kconline.com>
- Re: ATM Where is Bryan Greer
- From: "Michael Stephan" <mstephan@kconline.com>
- ATM Search for tripod legs
- From: "Michel Rebetez" <rebetez@loginnovation.com>
- Re: ATM Making Sono-tube stiff
- From: "Michel Rebetez" <rebetez@loginnovation.com>
- Re: ATM Which astronomy group?
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Re: hole cutters
- From: mike coslo <mjc5@psu.edu>
- Re: ATM focualt image
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Perfect Faucault outcomes?
- From: mike coslo <mjc5@psu.edu>
- ATM So you think you have an ugly mirror!
- From: mike coslo <mjc5@psu.edu>
- Re: ATM a crazy idea
- From: mike coslo <mjc5@psu.edu>
- In defense of POP- was ATM Zero-Obstruction Newtonian
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Glass Advice
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Suppier of Heater Rope??
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Another dangerous thought
- From: mike coslo <mjc5@psu.edu>
- Re: ATM knew better
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Another dangerous thought
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Polishing issues - terms.
- From: mike coslo <mjc5@psu.edu>
- Re: ATM Cam closing devices
- From: mike quilty <mquilty@mighty.net>
- ATM Scope mount
- From: mike quilty <mquilty@mighty.net>
- ATM new Dob page
- From: "Mike Spooner" <spooner@page.az.net>
- Re: ATM mirror coating
- From: "Mike Spooner" <spooner@page.az.net>
- RE: ATM 18 inch telescope
- From: "Mike Warne" <mike.warne@pihana.com>
- RE: Circuit board construction for the ATMer...?
- From: "Mike Warne" <mike.warne@pihana.com>
- Round the barrel, Was - ATM Star testing
- From: "Mike Warne" <mike.warne@pihana.com>
- RE: Round the barrel, Was - ATM Star testing
- From: "Mike Warne" <mike.warne@pihana.com>
- RE: ATM Another dangerous thought
- From: "Mike Warne" <mike.warne@pihana.com>
- Fw: ATM An adaptation of Gary Seronik's Curved Spider design.
- From: "Mike Warne" <mike_warne@yahoo.com>
- Re: ATM First light for the 8
- From: "Mike Warne" <mike_warne@yahoo.com>
- Re: ATM much magnification
- ATM Re: [ap-ug] Re: Longest F.L. Eyepiece On An A-P 10" Mak-Cass
- Re: ATM Wire Spiders
- Re: ATM Surface smoothness
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Surface smoothness
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Suppier of Heater Rope??
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Another dangerous thought
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Another dangerous thought
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Making Sono-tube stiff
- From: mjc5 <mjc5@psu.edu>
- Re: ATM much magnification
- From: mjc5 <mjc5@psu.edu>
- Re: ATM cooling worked glass
- From: mjc5 <mjc5@psu.edu>
- Re: ATM cerium oxide question....
- From: mjc5 <mjc5@psu.edu>
- Re: ATM cerium oxide question....
- From: mjc5 <mjc5@psu.edu>
- Re: ATM cerium oxide question....
- From: mjc5 <mjc5@psu.edu>
- Re: ATM cerium oxide question....
- From: mjc5 <mjc5@psu.edu>
- Re: ATM cerium oxide question....
- From: mjc5 <mjc5@psu.edu>
- ATM resources
- From: "mtj" <mtj@aculink.net>
- ATM: List Operating Question
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- RE: ATM 18 inch telescope
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM Plaster of Paris Tool question
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM Pyrex problems still?
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM Flux density
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM Grit steps question...
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- RE: ATM Another dangerous thought
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM Another dangerous thought
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM Strehl
- Re: ATM mid-Atlantic ATMs - help with history
- Re: ATM polishing problem
- Re: ATM polishing problem
- Re: ATM polishing problem
- Re: ATM Gregorian secondary WAS: polishing problem
- Re: ATM mirror from hell - help
- Re: ATM knew better
- Re: ATM knew better
- Re: ATM Message from List Owner
- Re: ATM How not to take apart cemented optics
- Re: ATM pinhole vs slit
- Re: ATM re: Sharpie Test
- Re: ATM removing central core
- Re: ATM prayer WAS: low pressure sodium lamp?
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- Re: ATM cerium oxide question....
- Re: ATM moving the lathe at AU last night
- Re: ATM cerium oxide question....
- Re: ATM cerium oxide question....
- Re: ATM cerium oxide question....
- Re: ATM cerium oxide question & radon...
- Re: ATM surplusshed 3-inch mirrors
- Re: ATM surplus shed 3-inch mirrors
- Re: ATM Optical Flats
- Re: ATM effective balancing weight for a dob
- Re: ATMA - membership
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Strehl
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM combination Cheshire sight tube
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM focualt image
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Question: topped down 16" f/3.9
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM 16" F/33 valid design?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Non lasing lerer diode Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM mirror coating and "image quality"
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Non lasing lerer diode Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Non lasing lerer diode Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM comments on diffraction limited
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM CeO slurry pump
- From: Opticalparts@aol.com
- ATM .75" secondary
- ATM Where is Bryan Greer
- From: Patrick Hudelot <hudelot@clipper.ens.fr>
- ATM Bryan Greer still there
- From: Patrick Hudelot <hudelot@clipper.ens.fr>
- Re: ATM 3 inch reflector
- From: "Patrick St. Jean" <stjeanp@pat-st-jean.com>
- ATM Small secondaries
- From: "Patrick St. Jean" <stjeanp@pat-st-jean.com>
- Re: ATM How not to take apart cemented optics
- From: "Patrick St. Jean" <stjeanp@pat-st-jean.com>
- ATM microfacetting in starlap pattern
- From: paul <Paforeman34@netscape.net>
- ATM Perfect Faucault outcomes?
- From: paul <Paforeman34@netscape.net>
- ATM faucault tester with telescope viewer
- From: paul <Paforeman34@netscape.net>
- ATM flatten outer two (parabolizing)
- From: paul <Paforeman34@netscape.net>
- ATM Parabolization summaries
- From: paul <Paforeman34@netscape.net>
- Re: ATM Where is Bryan Greer
- From: "Paul Stock" <comabereni@earthlink.net>
- Re: ATM Speaking of testing...
- From: "pdk" <pdk@tampabay.rr.com>
- Re: ATM focualt image
- From: pdk@tampabay.rr.com
- Re: ATM Minimum angle between altitude teflon pads
- From: "pdk" <pdk@tampabay.rr.com>
- ATM 1/2 in plate max diameter usefullness?
- From: "pdk" <pdk@tampabay.rr.com>
- ATM NOT AN AD, but I thought some might find this design interesting....
- From: "pdk" <pdk@tampabay.rr.com>
- Re: ATM .75" secondary
- From: pdk@tampabay.rr.com
- ATM 3 in blank
- From: "pdk" <pdk@tampabay.rr.com>
- ATM Grit steps question...
- From: "pdk" <pdk@tampabay.rr.com>
- Re: ATM Grit steps question...
- From: "pdk" <pdk@tampabay.rr.com>
- ATM 3in pics.
- From: "pdk" <pdk@tampabay.rr.com>
- Re: ATM Another dangerous thought
- From: "pdk" <pdk@tampabay.rr.com>
- ATM NEWT for windows layout for my 3 in scope, illumination diameter large enough?
- From: "pdk" <pdk@tampabay.rr.com>
- ATM Pit counting
- From: "pdk" <pdk@tampabay.rr.com>
- Re: ATM Pit counting
- From: "pdk" <pdk@tampabay.rr.com>
- Re: ATM My first carbon fiber tube
- From: "pdk" <pdk@tampabay.rr.com>
- ATM Polishing issues.
- From: "PDK" <pdk@tampabay.rr.com>
- Re: ATM No more Polishing issues. I was just a slacker.
- From: "pdk" <pdk@tampabay.rr.com>
- ATM Patience is the dirty secret of astronomy. ( I think )
- From: "pdk" <pdk@tampabay.rr.com>
- ATM First light for the 8
- From: "pdk" <pdk@tampabay.rr.com>
- ATM Ultra-lite Dobs using foam core components
- From: "Pete Johnson" <pjohnson1@cox.rr.com>
- ATM Hogging out link
- From: "Peter" <kitgears@kitgear.com>
- ATM Glass Advice
- From: "Peter" <kitgears@kitgear.com>
- ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: "Peter" <kitgears@kitgear.com>
- ATM Optical Flats
- From: "Peter" <kitgears@kitgear.com>
- Subject: Re: ATM Another dangerous thought
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: Subject: Re: ATM Another dangerous thought
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM Yet another interesting thought
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM My new "death ray"
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM My new "death ray"
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM Balls
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Figure45 and win xp
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM town observatory
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM moving the lathe at AU last night
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM LIttle Glass Buttons
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Minimum angle between altitude teflon pads
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Hogging out link
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Surface smoothness-Pitch experiment
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Surface smoothness-Pitch experiment
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM first decent seeing for 16" f/3.9
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Zero-Obstruction Newtonian
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Star testing
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Star testing
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Point Diffraction Interferometer?
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM 16" F/33 valid design?
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM 16" F/33 valid design?
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- ATM Non lasing lerer diode Question
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Non lasing lerer diode Question
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM mirror coating and "image quality"
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM How not to take apart cemented optics
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Non lasing lerer diode Question
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM How not to take apart cemented optics
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM much magnification
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM going soft on glue
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Non lasing lerer diode Question
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Some interpretation of ronchi and foucault pictures wanted please..............
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Non lasing lerer diode Question
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM ronchi question
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- RE: ATM atm newbie - where to get glass?
- From: "Peter Whitfield" <pwhitfie@bigpond.net.au>
- RE: ATM Looking for CCD-Shutters
- From: "Peter Whitfield" <pwhitfie@bigpond.net.au>
- RE: ATM Followup to " Some interpretation of ronchi and foucault pictures"
- From: "Peter Whitfield" <pwhitfie@bigpond.net.au>
- Re: ATM Another dangerous thought
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM machine overarm pivot & lap holder ideas
- From: Raidoflostdark@aol.com
- Re: ATM Pit counting
- From: Raidoflostdark@aol.com
- ATM combination Cheshire sight tube
- From: Ray Aldridge <pbwriter@fwb.gulf.net>
- Re: ATM Ultra-lite Dobs using foam core components
- From: Ray Aldridge <pbwriter@fwb.gulf.net>
- Re: ATM Ultra-lite Dobs using foam core
- From: Ray Aldridge <pbwriter@fwb.gulf.net>
- ATM 3 inch reflector
- From: Ray Aldridge <pbwriter@fwb.gulf.net>
- Re: ATM stopping a newtonian.
- From: Ray Aldridge <pbwriter@fwb.gulf.net>
- ATM Minimum angle between altitude teflon pads
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Minimum angle between altitude teflon pads
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Minimum angle between altitude teflon pads
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Minimum angle between altitude teflon pads
- From: "rguinamard" <rguinamard@infonie.fr>
- ATM UK amateur astronomy mailing list
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM atm, visit to France
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Speaking of testing...
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM Change of Plans, F/2 -> F/3.2
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM Zero-Obstruction Newtonian
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM 16" F/33 valid design?
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM Rough Grinding Using Hand Grinder & Diamond Wheel
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM Hogging out link
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Newbie questions from Argentina
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Polishing issues.
- From: "Richard" <richas@earthlink.net>
- Re: ATM Strehl
- From: "Richard F.L.R. Snashall" <rflrs@javanet.com>
- ATM Re: Wynne Corrector
- From: "Richard F.L.R. Snashall" <rflrs@javanet.com>
- Re: ATM Re: How not to take apart cemented elements.
- From: "Richard F.L.R. Snashall" <rflrs@javanet.com>
- Re: ATM How not to take apart cemented optics
- From: "Richard F.L.R. Snashall" <rflrs@javanet.com>
- RE: ATM What's needed for this resolution
- From: "Richard Klappal" <klappal@xnet.com>
- RE: ATM ultralight flexible mirror
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM resources
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM How to cut holes in a metal tube?
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM CAD program, cheap or free?
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM What's needed for this resolution
- From: Richard Ozer <rozer@ois-online.com>
- ATM Three Point Flotation
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Another dangerous thought
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Another dangerous thought
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Another dangerous thought
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM mirror coating
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM mirror coating and "image quality"
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM the right stuff
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM testing for sphere
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Pit counting
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM grind or polish
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Scratches at 9 my grinding
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM low pressure sodium lamp?
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: Horseshoe Mounts (was ATM Refractor Design)
- From: "Richard Schwartz" <richas@earthlink.net>
- ATM Cerium oxide
- From: Rick M <dreamer101ca@yahoo.ca>
- Re: ATM Cerium oxide
- From: Rick M <dreamer101ca@yahoo.ca>
- Re: ATM retouching
- From: "Rodger Petersen" <faintfuzzy@msn.com>
- Re: ATM Star testing
- From: "Rodger Petersen" <faintfuzzy@msn.com>
- ATM 2nd apology
- From: "Rodney Mayes" <rgm@muhlon.com>
- ATM Radioactive CeO and the Archive
- From: Roger Ceragioli <rogerc@as.arizona.edu>
- ATM Aero Xenon Lens
- From: "Rory Blake" <rory123@bellsouth.net>
- Re: ATM Aero Xenon Lens
- From: "Rory Blake" <rory123@bellsouth.net>
- Re: ATM Plaster of Paris Tool question
- From: "Sam Michael" <samm@idcomm.com>
- Circuit board construction for the ATMer...?
- From: "Sam Michael" <samm@idcomm.com>
- ATM stopping a newtonian.
- From: "Sam Michael" <samm@idcomm.com>
- ATM How not to take apart cemented optics. :-)
- From: "Sam Michael" <samm@idcomm.com>
- ATM Re: How not to take apart cemented elements.
- From: "Sam Michael" <samm@idcomm.com>
- ATM Re: How not to take apart cemented optics.
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM cerium oxide question....
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM My new "death ray"
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM My new "death ray"
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM cerium oxide question & radon...
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM cerium oxide question & radon...
- From: "Sam Michael" <samm@idcomm.com>
- ATM Help Support a Floppy Mirror
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Mirror Mirror on the Wall
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM low pressure sodium lamp?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM More on the construction of my GEM
- From: "Shane LaPierre" <shanelapierre@hotmail.com>
- ATM Another version of Virtual Spring Counterweights??
- From: "Shankland, CDR-Paul" <CDR-Paul.Shankland@cnet.navy.mil>
- ATM RE: atm-digest V1 #2910
- From: "Shankland, CDR-Paul" <CDR-Paul.Shankland@cnet.navy.mil>
- ATM Spring Counterweight Page for my Travelscope....
- From: "Shankland, CDR-Paul" <CDR-Paul.Shankland@cnet.navy.mil>
- ATM RE: CCD Shutters, Surplus Shed $25
- From: "Sidor . Kurt" <KSidor@drc.com>
- Re: ATM Polishing issues.
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM An adaptation of Gary Seronik's Curved Spider design.
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM town observatory
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM LIttle Glass Buttons
- From: "stan kohut" <nutsp@alltel.net>
- ATM machine overarm pivot & lap holder ideas
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM TUE - Ronchi
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM Making Sono-tube stiff
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM Spectrohelioscopes @ http://imz064.ust.hk
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM Looking for CCD-Shutters
- From: "stan kohut" <nutsp@alltel.net>
- ATM ronchi testing the 14.6 x .645" F 4.6
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM Cerium oxide
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM Cerium oxide
- From: "stan kohut" <nutsp@alltel.net>
- Re: ATM Glass, too big, too thin
- Re: ATM Skewers
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- ATM Scratches at 9 my grinding
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Scratches at 9 my grinding
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Scratches at 9 my grinding
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Cerium oxide
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Subject: ATM TDE related to polishing duration?
- Re: ATM Scratches at 9 my grinding
- ATM When to stop.
- From: Steve Beccue <lsteve@daffodil.practicalsciences.com>
- ATM Off Axis Telescope Link
- From: Steve Fejes <jsfejes@swva.net>
- ATM Zero-obstruction Newtonian
- From: Steve Fejes <jsfejes@swva.net>
- Re: ATM Making Sono-tube stiff
- From: Steve Fejes <jsfejes@swva.net>
- Re: ATM Bought a Mirror...Now What?
- From: Steve Fejes <jsfejes@swva.net>
- Re: ATMJ
- From: "t obrien" <killer_jupiter@robotworks.net>
- ATMA - membership
- From: "t obrien" <killer_jupiter@robotworks.net>
- ATM Questions on The Perfect Machine
- From: Tage Carlson <Tage.a.carlson.itar@lmtas.com>
- Re: ATM Another dangerous thought
- From: Technologie2000@t-online.de (Technologie2000)
- Re: ATM Another dangerous thought
- From: Technologie2000@t-online.de (Technologie2000)
- Re: ATM Another dangerous thought
- From: Technologie2000@t-online.de (Technologie2000)
- Re: ATM Yet another interesting thought
- From: Technologie2000@t-online.de (Technologie2000)
- Re: ATM Looking for CCD-Shutters
- From: Technologie2000@t-online.de (Technologie2000)
- ATM Skewers
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- Re: ATM much magnification
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- ATM An adaptation of Gary Seronik's Curved Spider design.
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- RE: ATM An adaptation of Gary Seronik's Curved Spider design.
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- ATM for BinoNewton - need non-elliptical flats
- From: Thomas Strehl <t.strehl@aon.at>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM CCD on the 11.2" F/2
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Looking for CCD-Shutters
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Flux density
- From: Torsten Clay <tclay@theriver.com>
- Re: ATM Flux density
- From: Torsten Clay <tclay@theriver.com>
- Re: ATM Figure45 and win xp
- From: Torsten Clay <tclay@theriver.com>
- ATM How to cut holes in a metal tube?
- From: tttt ccccc <k3hx@juno.com>
- Re: ATM Q: Fog-streaks during polishing
- From: Tyrone <drummer@austin.rr.com>
- ATM Pitch lap prob
- From: "Tyrone Steele" <drummer@austin.rr.com>
- Re: ATM Pitch lap prob
- From: Tyrone Steele <drummer@austin.rr.com>
- Extreme long F ratio was Re: ATM 16" F/33 valid design?
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM My Cass'a'grin Project : Restart
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- Re: ATM Skewers
- From: "Vegos" <astro@rvi.net>
- Re: ATM 11.2" F/2 Primary testing questions :)
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM how to cut a holes in a metal tube
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATM Re: Battery and charger
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM LIttle Glass Buttons
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Surface smoothness-Pitch experiment
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Zero-Obstruction Newtonian
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM polishinh compounds
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: Circuit board construction for the ATMer...?
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM making a mirror blank of thin glass discs
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Old Mirrors for Testing
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM making a mirror blank of thin glass discs
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM making a mirror blank of thin glass discs
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATM Glass, too big, too thin
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Is this really glass?
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM machine overarm pivot & lap holder ideas
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATM Re: Where is Bryan Greer
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM knew better
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATM Is Richard realy back.
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM knew better
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Another dangerous thought
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Another dangerous thought
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM for BinoNewton - need non-elliptical flats
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Re: How not to take apart cemented elements.
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM atm, visit to France
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Newbie questions from Argentina
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Polishing issues.
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Questions on The Perfect Machine
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Questions on The Perfect Machine
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: Re[2]: ATM Newbie questions from Argentina
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Newbie questions from Argentina
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATMJ
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATMJ
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM town observatory
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM How not to take apart cemented optics
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM ronchi question
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM ronchi question
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM cooling worked glass
- From: "William Kelley" <wekelleylwk@sedona.net>
- Re: ATM Patience is the dirty secret of astronomy. ( I think )
- From: WYLECOYOTE <WYLECOYOTE@terra.es>
- ATM town observatory
- From: "Yvi und Alex Urban" <alexander.urban@gmx.de>
- Re: ATM town observatory
- From: "Yvi und Alex Urban" <alexander.urban@gmx.de>
- Re: ATM town observatory
- From: "Yvi und Alex Urban" <alexander.urban@gmx.de>
Mail converted by MHonArc 2.4.7