Amateur Telescope Makers (ATM) Archive for FEB97 - by thread
- : ATM Val's postings.... (long), (continued)
- [Fwd: ] ATMJ article on grinding a 6" by Russell and Germann,
Mel Bartels
- [Fwd: ATM Val_G],
Mel Bartels
- [Fwd: Recent Article In ATMJ],
Mel Bartels
- AQ, list of ATM clubs,
Steve Meyering
- Re: Astrophoto ATM scope,
Mel Bartels
- ATM "Diffraction Limited" a definition,
Jack Schmidling
- ATM "frozen" liquid mirrors,
CHEN
- ATM "Frozen" liquid mirrors,
CHEN
- ATM "setting" setting circles,
Rex Klopfenstein, Jr
- ATM 'Frozen' liquid mirrors,
CHEN
- ATM - off topic lens cleaning,
Jim McKay
- ATM 13" SCT project,
Robert C. Pfaff
- ATM 2 questions,
Scott Berfield
- ATM 7" soda-lime tempered glass, Part Two, the Sequel!,
BRYAN LEENHEER
- ATM 7" soda-lime tempered glass...,
BRYAN LEENHEER
- ATM 8" mirror Tests,
Scott Berfield
- ATM 8.4m Spuncast Mirror mold leak,
ric rokosz
- ATM [Fwd: [Fwd: Obsidian mirrors]],
Rodger Petersen
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Mark VandeWettering" <markv@tick>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Tom Warm" <Tom_Warm@mmacmail.jccbi.gov>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Aart Olsen <aart@ux1.cso.uiuc.edu>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Curt Thompson <cthompson@claircom.com>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Dan Gray <grayarea@teleport.com>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [mark wilkinson <laseroptics@compuserve.com>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [robwilliams@juno.com (Robert l Williams)]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Admin request: /^subject:\s*help\b/i],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [mark wilkinson <laseroptics@compuserve.com>]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [masalazarg@ifosel.net.mx]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [richas@pacbell.net]],
Mel Bartels
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Sue&Alan French <Sue_and_Alan_French@compuserve.com>]],
Mel Bartels
- ATM [Fwd: FW: Mechanical Components for 8"],
Mel Bartels
- ATM [Fwd: Re: ],
Mel Bartels
- ATM [Fwd: Re: Astro Imaging Nomenclature],
Mel Bartels
- ATM a message from the list owner,
Mel Bartels
- ATM A new spin on epoxy mirror problems,
andyman
- ATM A Really Quick & Easy Foucault Tester,
M.E. Germann
- ATM Actually Producing Dob Kits,
M.E. Germann
- ATM Again "Diffraction Limited",
M.E. Germann
- ATM Al and CaF2 coating,
Ricardo Dunna
- ATM Al and SiO coatings,
Ricardo Dunna
- ATM Aluminum casting,
Dave
- ATM Alumizing 'Frozen' liquid mirrors,
CHEN
- ATM Amateur Optics & Amateur Radio,
M.E. Germann
- Re: ATM and ball-milled rouge,
Michael Schmidt
- ATM Anodizing,
Brian Nestel
- ATM appolgy,
Kevin Ferguson
- ATM Archives updated for January 1997,
Andy Steere
- ATM Archives, RTMC, and copies of old digests,
Tim Poulsen
- ATM Artificial star test questions,
gdudley
- ATM Artificial Star Tester,
DENNIS HOOFNAGLE
- Re: ATM Asteroid Collision?,
Richard Schwartz
- ATM Astrophoto Scope,
Jack Schmidling
- Re: ATM Astrophotography - Build or Buy?,
Charles W. Shaw
- ATM Astrophotography scopes,
mancus
- ATM atm-digest V1 #571,
Pshankland
- ATM atm: 7" tempered glass...,
Dave McCarter
- ATM Average P-V Wavefront Error?,
Richard H. Jarnagin
- ATM backlash,
Mel Bartels
- ATM Backlash control in worm gear sets,
Del Stanton
- Re: ATM Backlash control in worm gear sets..B&C,
Del Stanton
- ATM Baffling (was "What's the best flat black tube paint?"),
Andy Hochstetler
- Re: ATM Beginner Mirror-Making Video,
Chris Westland
- ATM Beginner Video ADDRESS!!!,
M.E. Germann
- ATM Beginner Videos & Instruction Sets,
M.E. Germann
- ATM BERAL coatings,
Dave
- ATM Beryllium hazards,
Jim McKay
- ATM Beveling Question.,
Robert Sexton
- ATM Biggots, who me?,
Jack Schmidling
- ATM Black "paint",
Billy Rudock
- Re: ATM Black "paint" -,
K1JJ
- ATM Black paint,
Richard Beaver
- ATM Blackening Aluminum?,
Dave
- ATM Blackening brass,
Theron Wierenga
- Re: ATM BLACKENING BRASS,
Robert C. Pfaff
- ATM Bob Cox is off topic,
Pshankland
- ATM bubbles in pitch lap,
NickHen
- Re: ATM Bullet Proof Glass,
Chris Westland
- Re: ATM Bullet proof glass,
Dave Sopchak
- ATM Cass optical Alignment,
michael chibnik
- ATM Cassegrain Design Information,
Ken Carter
- FW: ATM Cassegrain Design Information,
Phillips, Bill R
- ATM Cast Mirrors,
Scott Berfield
- ATM Cat hair,
gdudley
- RE:ATM Caustic Test,
clement
- ATM Cave Mirror,
James Krushlucki
- ATM Cave Optics A Quarter Century Ago,
M.E. Germann
- ATM Cave Optics: Newtonian vs. Cassegrainian,
M.E. Germann
- ATM Center of tube...,
Jake
- Re:ATM Changing Clothes,
Nathan Hays
- ATM Changing Clothes?,
mancus
- ATM Chemical compatibility.,
Rogerio Odriozola Belden
- Re: ATM Cleaning with Collodion,
Bill Krosney
- ATM clubs - let's compile a list,
Tim Poulsen
- Re: ATM Commercial mirror question FWD,
Howard L. Clausing
- ATM Composite Tubing,
John D. Gwinner
- ATM Computer Alt/Az Drives,
Robert Duvall
- ATM Computer Driven Super Polaris Equatorial Mount (!?): Advice and Information Sought,
Ken Slater
- ATM Concrete epoxy-liquid mirror,
ric rokosz
- ATM Cookbook compatibility with TL Systems Eq autoguider,
Ken Carter
- ATM curve generation,
Phillips, Bill R
- Re: ATM Daisy Sight,
PAugello
- ATM DataExchange Internet Services,
Ike Stewart
- ATM David Lane's WEB page address,
Marek Popiel
- ATM Delicious unfrozen liquid mirror,
CHEN
- ATM Design advice for tracking Dobs,
jim lawrence
- Re: ATM Diabling Sidereal clock for a Poncet mount,
Chris Westland
- ATM Diagonal Offset?,
Scott.A.Hansen
- ATM Diagonal Size Questions?,
Scott.A.Hansen
- ATM Diffraction Limited / Diffraction Disk,
Marinus van der Lugt RST16
- ATM digest numbering,
Mel Bartels
- ATM Disabling sidereal clock on Lumicon Sky Vector,
jim lawrence
- ATM Dob Kits,
Jack Schmidling
- ATM Dob Kits, Just Do IT,
Jack Schmidling
- ATM Dob Kits: OK, I Give In!,
M.E. Germann
- ATM Dob Kits: Orion Has Some Already!,
M.E. Germann
- ATM Dob Kits: Someone already DOES It!,
Bratislav Curcic
- ATM Dob Kits: Someone Just DO It!,
M.E. Germann
- ATM Double-arm Barn Door Design,
LED500
- ATM Drive clutch.,
Rogerio Odriozola Belden
- ATM Dudley Le Roy Clausing - Aluminizing,
David Lilly
- ATM DYNAMAX teleconverter needed,
andyman
- ATM E&W?,
Sam Hunt
- ATM Enough already...,
Scott Berfield
- ATM Epoxy Mirror Making,
Ken Carter
- Re: ATM events at RTMC,
Curt Thompson
- ATM events at RTMC-a forward from Steve Edberg,
Randy Johnson
- ATM Excessive?,
Michael Spooner
- Re: ATM Excessive? Telescopes and tractors,
Kreig McBride
- ATM Eyepiece selection,
Jay Shroff
- ATM FAQ written, ready for comments,
Tim Poulsen
- Re: ATM Fast vs Slow scopes,
Bob & Valerie Goff
- ATM Figuring advice,
Douglas Arion, Prof. Physics
- ATM Figuring with HCF.,
James W. Burrows
- ATM Finder Scope Lens,
rutherfordt
- ATM first attempt questions,
Paul Weiler
- ATM First Light,
Tracy Wilson
- ATM First Mirror & Luck,
Cary Chleborad
- ATM First Mirror, Getting it off the ground.,
Robert Sexton
- ATM Fit a triangle in a square?,
Jake
- Re: ATM Focuser Position,
Sue&Alan French
- ATM Focuser Postion,
Brad Davy
- ATM formula for 1/4 and 1/8 wave,
Marc van Gestel
- ATM Foucault reply,
Peter Abrahams
- ATM Foucault tester,
mancus
- ATM Foucault Tester,
Cliff Corcoran
- ATM Foucault testing & response,
Cooper
- Re: ATM frozen liquid mirrors,
Dave Sopchak
- ATM Frozen liquid mirrors,
ric rokosz
- ATM Fw: Historical Marker Proposal,
Joseph G. Boike
- ATM Gear reduction for dobs,
Bob Segrest
- ATM Good place for grinding, polishing,
Guillaume Perry
- ATM Goodbye,
ROBERTS, VALERIE
- ATM Grinding and Polishing tools,
Matt Tarlach
- Re: ATM Grinding and Polishing Tools,
Richard K. Holman
- ATM Grinding Barrel,
Sue&Alan French
- ATM Grinding stand,
mancus
- ATM Grrinding stands,
foreilly
- ATM Hale Bopp,
Scott Berfield
- ATM harold suiter comments,
Mel Bartels
- ATM Have trouble polishing down a hill in the center.,
Arni Ingimundarson
- ATM heat rope,
Gil Stacy
- ATM Hello to all and some starting advice?,
MARK
- ATM Hole in mirror,
David Reynolds
- ATM Homemade Foucault Testers,
Robert Duvall
- ATM How About A Lens-In-A-Day?,
M.E. Germann
- Re: ATM I missed it -- Is Novak Gone?,
Richard Keppler
- Re: ATM I'm Depressed,
Robert Duvall
- The ATM Institute,
M.E. Germann
- ATM It's Kids Who Should Make Mirrors,
M.E. Germann
- Re: ATM JMI focusers,
Jim Fly
- ATM K-1000 : the final chapter,
andyman
- ATM Kicking Bob Cox's XXXX,
M.E. Germann
- ATM Laptop Power,
Charles W. Shaw
- ATM Large Diagonal & Sky Background,
Pshankland
- ATM Large Diagonal and Sky Background,
Scott Hogsten
- ATM Lens Coatings,
Brian Nestel
- ATM Light Bucket Review,
Jack Schmidling
- ATM Light Bucket Review and Rework,
Jack Schmidling
- ATM Light Shield For Starsplitter Compact,
Silvio Jaconelli
- ATM limits of mirror testing,
Mel Bartels
- ATM List of Clubs,
Charles W. Shaw
- ATM List Participation in RTMC,
Randy Johnson
- ATM Location of Mathis Drive Manufacturer,
Donn Starkey
- ATM Longevity Of Silver Films,
M.E. Germann
- ATM Looking for pits,
Douglas Arion, Prof. Physics
- ATM lost email address,
Ken Lowther
- ATM lost email/Optics Workshop,
Kreig McBride
- ATM Low Cost Mirrors,
Richard H. Jarnagin
- ATM low cost mirrors,
andyman
- ATM Low Profile Focusers,
Eric C. Mueller
- ATM Low Profile Focusers: Thanks...,
ecm
- ATM Lucky find. 6" f/8,
Jack Jones
- ATM LX200 Command Syntax ???,
Bob Segrest
- ATM Making Beginner Videos,
M.E. Germann
- ATM Making perfect mirrors,
tasimmons
- ATM MakNewt Corrector Cell,
Bill & Tracy Marriott
- ATM MakNewt Project,
Bill & Tracy Marriott
- ATM MakNewt Project/Polishing Corrector,
Bill & Tracy Marriott
- ATM Mark Suchtung where are you?,
gdudley
- ATM Mel Bartels' Thin Mirror page,
Matt Tarlach
- ATM Mel's motorized dob,
Jack Jones
- ATM metal mirror working,
Mel Bartels
- Re: ATM Method of Blackening Brass,
Dick Strever
- RE: ATM method of blackening brass,
Callum Potter
- ATM Micro guider,
ras
- ATM Mini-Mak,
Jose Amaury Pereira
- ATM mirror,
Gary Wolanski
- ATM Mirror Guru in Simi/ventura area?,
michael chibnik
- ATM Mirror Labs,
Tracy Wilson
<Possible follow-up(s)>
- RE: ATM Mirror Labs,
Chris Westland
- Re: ATM Mirror Labs,
Robert C. Pfaff
- Re: ATM Mirror Labs,
Michael Schmidt
- Re: ATM Mirror Labs,
Peter Hirtle
- ATM Mirror Labs,
Pshankland
- Re: ATM Mirror Labs,
Looney
- ATM Mirror Labs,
jwirs
- Re: ATM Mirror Labs,
Robert C. Pfaff
- Re: ATM Mirror Labs,
jwirs
- Re: ATM Mirror Labs,
Scott Milligan
- Re: ATM Mirror Labs,
Scott Milligan
- Re: ATM Mirror Labs,
Scott Milligan
- Re: ATM Mirror Labs and videos,
Kreig McBride
- ATM Mirror Making Demo at Stellafane,
Tony Cecce, Corning, NY
- ATM Mirror Markings?,
Steve Seitz
- ATM Mirror Mount,
Rob Williams
- ATM mirror quality,
Mel Bartels
- ATM Mirror Quality: Clarification,
M.E. Germann
- ATM Mirror Quality: Foucault vs Interferometer,
M.E. Germann
- ATM Mirror Quality: What Can You See?,
M.E. Germann
- ATM Missing mirror vendor's table,
Tim Poulsen
- ATM More advise needed,
Theron Wierenga
- ATM More On The "Five Systems" Message,
M.E. Germann
- ATM mounting and drive for my 8",
Scott Berfield
- ATM Msg for Don Clement,
andydtg
- ATM National Amateur-Made Certificate,
M.E. Germann
- Re: ATM new webpage on large thin mirror making,
Chris Westland
- ATM Newbie here..,
Mike Downer
- Re:ATM Newport Glass,
Nathan Hays
- ATM Newport Glass.,
James A. Klutts
- ATM Newport Optical/glass order,
Kreig McBride
- ATM Newt Binocs,
Scott Berfield
- ATM nomenclature,
Mel Bartels
- ATM Non-Digital Setting Circles,
Ken Carter
- ATM Off topic: The INTER-SOL Program,
LosAlegros
- ATM OK, I'm going to grind my first one, a few Q's.,
Marc van Gestel
- ATM OK, money I understand, what about time?,
Mike Browne
- Re: ATM Olympus OM-1,
PaulD60258
- Re: ATM Oops!,
Robert Duvall
- ATM Open tubes optic contaminations,
ecm
- ATM Optical "Arrete" In The Modern World,
M.E. Germann
- ATM Optical Bargains & Consumer Surplus,
M.E. Germann
- ATM Opticast,
James A. Klutts
- ATM Optics And Negative Capital,
M.E. Germann
- ATM Optics Workshop Update/registration,
Kreig McBride
- ATM Optics,Quality,Price,etc.,
Michael Spooner
- Re: ATM ota,
Albert F. Kelly
<Possible follow-up(s)>
- ATM ota,
Paul Weiler
- Re: ATM ota,
Daniel W. Bakken
ATM Overall Correction,
Jack Schmidling
ATM oversize lap difficulties,
Michael Schmidt
ATM Pad Polishing: No Scratches!,
Roger C. Ceragioli
ATM Palomar Worm,
clement
ATM Path to parabolic - scrathes!!!,
Jay Shroff
ATM Pitch,
polaris
ATM Pitch Amount.,
Scott Hansen
ATM Pitch Amount?,
Scott.A.Hansen
Re: ATM Pitch Bubbles,
Nathan Hays
ATM Pitch Lap Grapes,
Gary Seronik
ATM Pitch Removal,
Gil Stacy
ATM Pitch.,
Rogerio Odriozola Belden
ATM pitch..,
BRYAN LEENHEER
Re: ATM Pitch... channels? [Also ZiO vs. CeO],
Dave McCarter
ATM Pitch...how deep to press/melt channels? [Also ZiO vs. CeO],
John Garland
ATM Plans for Laser Collimator,
Ken Carter
ATM Plaster tools!,
Scott.A.Hansen
Re[2]: ATM Plate glass stresses!,
Scott.A.Hansen
ATM Polarizer Material,
Rob O'Toole
Re: ATM polarizer material,
Chris Westland
ATM Polishing Cervit,
btk
ATM Polishing doubts.,
Rogerio Odriozola Belden
ATM Polishing questions,
Cooper
ATM potentially silly questions,
David Hinerman
ATM Powder metal inquiry,
CHEN
ATM Pre-fab Dob kits...,
Bagheera
ATM Quality Claims In The 1950s -- Newtonians,
M.E. Germann
ATM Questions re stepper motors,
Jason M. Santos
ATM quickcam Autoguider,
Gary Wolanski
ATM Raised zone?,
Cooper
ATM Re: APO Bigots,
Sue&Alan French
Re: ATM Re: Apodizing reference,
Suzanne Sarlette/Gerald Pearson
ATM Re: atm-digest V1 #548,
Kevin Layou
ATM Re: atm-digest V1 #581,
PaulD60258
ATM Re: Camera for Astrophotography,
Gary Wolanski
ATM Re: Colibri Mak Cass,
Del Stanton
ATM Re: Der Schiefspiegler,
Marco Lorenzi
ATM Re: Dob Kits,
Sue&Alan French
ATM Re: Pentax K1000,
andyman
ATM Re: polishing pads and ball-milled rouge,
Roger C. Ceragioli
Re: ATM Re: RTMC,
Richard Schwartz
ATM Re: RTMC Webcam idea,
Randy Johnson
ATM Re: Slow vs. Fast,
Sue&Alan French
RE: ATM Re: The Big Dob Two-Step (-per drive),
Chris Westland
ATM re: To Insulate, or not insulate - that is the question!,
Paul Boltwood
ATM Re: Val's postings....,
Marinus van der Lugt RST16
ATM Re: What Could Have Been,
John D. Gwinner
ATM Re: Worm Fabrication,
Peter Hirtle
ATM RE: Yolo design,
Roger C. Ceragioli
ATM RE: your mail,
Chris Westland
ATM Re:Diagonal Offset,
Nathan Hays
ATM re:flat black,
James Krushlucki
ATM Re:Re:Newport Glass,
Nathan Hays
ATM Real basic inquiry,
Mark Salter
ATM Really low profile focusers,
Richard L. Hobt
ATM recent letter exchange in AA13 between Clark and Suiter,
Mel Bartels
ATM Recycling Pinholes,
Jack Schmidling
ATM Reflections and collimination,
Emil Johnsen
ATM Reflex finder.,
Rogerio Odriozola Belden
ATM Regrinding after polishing -- tool recovery?,
mancus
ATM Regrinding: How far to back up?,
John Garland
ATM Request for Stellafane Convention Speakers,
Scott Milligan
ATM Robert Cox,
Richard Beaver
ATM Ronchi, the Easy way,
Jack Schmidling
ATM Ross null-subtle differences,
ric rokosz
ATM RTMC,
Peter Abrahams
<Possible follow-up(s)>
- ATM RTMC,
Silvio Jaconelli
Re: ATM RTMC '97 Theme:Making, Using, and Choosing Telescopes,
Henry T. Van Gemert
ATM RTMC 1995,
Randy Johnson
ATM RTMC, Another Stab at Discussion,
Randy Johnson
<Possible follow-up(s)>
- Re: ATM RTMC, Another Stab at Discussion,
andydtg
- ATM RTMC, Another Stab at Discussion -Reply,
BRYAN LEENHEER
- Re: ATM RTMC, Another Stab at Discussion,
Tom Krajci
- Re: ATM RTMC, Another Stab at Discussion,
Randy Johnson
- Re: ATM RTMC, Another Stab at Discussion -Reply,
Richard Schwartz
- Re: ATM RTMC, Another Stab at Discussion -Reply,
Mark Salter
- Re: ATM RTMC, Another Stab at Discussion -Reply,
Randy Johnson
- Re: ATM RTMC, Another Stab at Discussion -Reply,
Randy Johnson
- Re: ATM RTMC, Another Stab at Discussion -Reply,
Randy Johnson
- Re: ATM RTMC, Another Stab at Discussion -Reply,
Henry T. Van Gemert
ATM RTMC-A Call to Arms,
Randy Johnson
Re: ATM Russian gallilean binoculars,
Chris Westland
ATM Settled rouge - versus milled or both - mill then settle,
Del Stanton
Re: ATM silvering,
Chris Westland
ATM Silvering Video Apologies,
M.E. Germann
ATM Slitless tester and/or Foucault tester plans,
John Garland
ATM So What The Heck is RTMC anyway?,
Randy Johnson
ATM Sorry about HTML Garbage,
Ike Stewart
ATM Source for lenses,
Mark Salter
ATM Sparks During Grinding,
espector
ATM Speculum metal for mirror making,
Chris Westland
ATM Split-ring Plans needed,
Ricardo Dunna
ATM Spot marking the secondary,
Billy Rudock
ATM spray silver?,
Aart Olsen
ATM Spun Cast Metal,
John D. Gwinner
ATM squares to circles,
Rodger Petersen
ATM Star Party EP,
Rodger Petersen
ATM Star Testing,
John D. Gwinner
ATM Steell washer roughing,
Gil Stacy
ATM Stepper Motor Rates,
Charles W. Shaw
ATM stepper motor source,
Donald Clement
ATM Stepper motors how smooth is the drive?,
Ken Carter
ATM Stepping Motors - fast step - lower power,
Del Stanton
ATM Stopping Down For "Quality",
M.E. Germann
ATM Stressed lap--what's that?,
Michael Schmidt
ATM Supporting a mirror Upside-Down!,
Roger C. Ceragioli
ATM Surplus in San Jose,
Akkana
ATM swap,
Sam Hunt
ATM swap pillow bearings,
Sam Hunt
ATM switching from SiCa 80 to 180,
Mel Bartels
ATM Testing a flat,
Spencer Roedder
ATM Thanks for your advice on allergy,
Guillaume Perry
ATM The Big Dob Two-Step (-per drive),
Chris Westland
<Possible follow-up(s)>
- RE: ATM The Big Dob Two-Step (-per drive),
Chris Westland
- Re: ATM The Big Dob Two-Step (-per drive),
Robert C. Pfaff
- RE: ATM The Big Dob Two-Step (-per drive),
andydtg
- Re: ATM The Big Dob Two-Step (-per drive),
K1JJ
- Re: ATM The Big Dob Two-Step (-per drive),
Albert F. Kelly
- RE: ATM The Big Dob Two-Step (-per drive),
Greg Granville
- RE: ATM The Big Dob Two-Step (-per drive),
Robert C. Pfaff
- Re: ATM The Big Dob Two-Step (-per drive),
Chris Westland
- RE: ATM The Big Dob Two-Step (-per drive),
Bob Segrest
- Re: ATM The Big Dob Two-Step (-per drive),
Richard Schwartz
- RE: ATM The Big Dob Two-Step (-per drive),
Robert C. Pfaff
- RE: ATM The Big Dob Two-Step (-per drive),
Kurt Hillig
- RE: ATM The Big Dob Two-Step (-per drive),
Donald Clement
- RE: ATM The Big Dob Two-Step (-per drive),
andydtg
ATM The Savior Of Mirror-Making?,
M.E. Germann
ATM The Web,
Chris Westland
ATM Tinsley Cass./Class or DK. Off topic....,
Bill & Tracy Marriott
ATM Tolerance in Foucault-testing?,
Marc van Gestel
ATM Too deep saggita.Do what?,
Ricardo Dunna
ATM Toothpaste as abrasive?,
mancus
Re: ATM Toothpaste as abrasive?,
Robert Duvall
Re: ATM Toothpaste as abrasive?,
Ken Carter
ATM Tube for 4.5",
ecm
ATM Turned edge?,
mancus
ATM Turpatine .NE. Turpentine,
Richard Schwartz
ATM Unfrozen liquid mirror,
Curt Thompson
ATM Val's postings.... (long),
BRYAN LEENHEER
ATM Val's Silvering Experiments,
John D. Upton
ATM Val_G,
Atmj1
ATM vendor list,
Mel Bartels
ATM VHS,
Tracy Wilson
ATM Video-mirror grinding/pitch laps,
Kreig McBride
Re: ATM Washing hands while,
Don Loftus
ATM Washing hands while grinding,
mancus
ATM Wavefront Estimates,
Jack Schmidling
ATM Wavefront Estimates On Test Scopes,
M.E. Germann
Re: ATM What's the best fla,
Don Loftus
Re: ATM What's the best flat black tube paint?,
Andy Hochstetler
ATM Where are the archives for this list?,
MARK
ATM Who aluminizes?,
Jack Jones
ATM Why Commercial Refractors Work Well,
M.E. Germann
ATM Woodworking,
mancus
Re: ATM Woodworking - Making circles,
Chris & Elizabeth Barker
ATM Worm gea,
Robert C. Pfaff
Re: ATM worms,
Chris Westland
ATM Worms and gears,
Andy Hochstetler
Re: ATM Worms and gears and motors (where to buy?),
Akkana
ATM WTB: 6" mirror tool,
Theron Wierenga
ATM YAGPN...,
Mike Browne
ATM Yolo Aberrations,
Roger C. Ceragioli
ATM Yolo Designs,
Ken Carter
ATM Your First #!@& Mirror,
lolkovic
ATM ZiO vs. CeO,
John Garland
Re: ATM- Regarding new ATMs,
Don Loftus
ATM- Worm Gears,
Don Loftus
Re: ATM: cat hair,
Richard Beaver
ATM: First Mirror - 12.5 inch f/6,
HERVEY LEMAY
ATM: Grinding Sparks,
Dave McCarter
ATM: Pinhole(s),
Dave McCarter
ATM: Re: Regarding new ATMs,
Ken Carter
Re: ATM: Regarding new ATMs,
Akkana
ATM: What Could Have Been,
M.E. Germann
ATM:Newbie questions-Enclosed tube vs Truss tube,
William H. Shamblin,Jr.
ATM:Report on Fan Cooling,
Dave McCarter
ATMers in the RSA,
Neil Thompson
Big Wooden Circles (Was Re: ATM: Regarding new ATMs),
Matt & Belinda Tarlach
Bob Cox's 1956 Review Of ATM-1,
M.E. Germann
FAQ, list of ATM clubs,
Sandra Barta
FAQ, list of ATM clubs?,
Tim Poulsen
First light for a new ATM!,
mark lyon
It's An ATM Thing,
M.E. Germann
Kudos To Stellafane ATM Demo!,
M.E. Germann
More On ATM Institute,
M.E. Germann
New ATM's,
Jack Schmidling
Re: New ATMs,
Dave Sopchak
No Subject,
Steve Meyering
Recent Article In ATMJ,
M.E. Germann
Regarding new ATMs,
Cooper
Steve Edberg on ATM List participation in RTMC-A Forwarded Msg,
Randy Johnson
Subject: ATM Newport Glass.,
Ricardo Dunna
That First ATM Project,
M.E. Germann
UK ATM files,
Stephen Tonkin
Re: Worm fabrication (was : RE: ATM The Big Dob Two-Step (-per drive)),
andydtg
Worm fabrication (was : RE: ATM The Big Dob Two-Step (-per drive)),
Carl Brennan
Yet More On ATM Institute,
M.E. Germann
Mail converted by MHonArc 2.1.0