-- BEGIN included message
- To: owner-atm@shore.net
- Subject: BOUNCE atm@shore.net: Non-member submission from [Curt Thompson <cthompson@claircom.com>]
- From: owner-atm@shore.net
- Date: Tue, 18 Feb 1997 13:27:42 -0500 (EST)
>From atm-owner Tue Feb 18 13:27:34 1997 Received: from shore.shore.net (root@shore.shore.net [192.233.85.136]) by relay1.shore.net (8.8.3/8.8.3) with ESMTP id NAA21670 for <atm@relay1.shore.net>; Tue, 18 Feb 1997 13:27:33 -0500 (EST) Received: from mailgw.claircom.com (mailgw.claircom.com [199.5.241.51]) by shore.shore.net (8.8.3/8.8.2) with SMTP id NAA28334 for <atm@shore.net>; Tue, 18 Feb 1997 13:27:29 -0500 (EST) Received: from moby.eng.claircom.com by mailgw.claircom.com with smtp (Smail3.1.26.7 #2) id m0vwuGB-00007NC; Tue, 18 Feb 97 10:27 PST Received: from moby by moby.eng.claircom.com with smtp (Smail3.1.29.1 #6) id m0vwuGA-000CdrC; Tue, 18 Feb 97 10:27 PST Sender: cthompson@shore.net Message-ID: <3309F48A.432B@claircom.com> Date: Tue, 18 Feb 1997 10:27:22 -0800 From: Curt Thompson <cthompson@claircom.com> X-Mailer: Mozilla 3.01Gold (X11; I; SunOS 5.5 sun4d) MIME-Version: 1.0 To: atm@shore.net Subject: ATM Polish rear surface of mirror? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi All, I'm new to the ATM list and fairly new to ATM in general. I'm currently working on re-figuring a 6" mirror that I made a feeble attempt at as a teenager. I saw instructions somewhere (Texereau I think) about grinding the rear surface of the mirror. Why would I want to do this? While I'm at it: Is it useful to have a round mirror blank? I ground off a chip from the side of the mirror and now the thing is not quite round. When I used the "Bowl" method to chamfer the edge, the bevel is wider in some spots than in others. thanks, Curt Thompson
-- END included message