Re: ATM What's the best flat black tube paint?

[Andy Hochstetler <andyhoc@mindspring.com>]

Brian Nestel wrote:
<< You can make a extension with a piece of 1/2 EMT and a dowel. You take
the EMT and flatten about 14" of the end then bend the flattened part
90deg and then bend it back so you have a step half the diameter of a
spray can. Then drill a hole in the flattened conduit where the first
bend was to allow access to the inside of the conduit, then you tape the
spray can to the step you made in the conduit with duct tape and put a
dowel down through the conduit to press the spray head. If you need a
drawing let me know and I will email an attachment.
>>

Thanks for the reply, Brian.  I think it makes sense to me.  I'll give it a 
try in the next day or so.  But, after what Brad has said about still 
getting some light dust coming off, I'm not sure if it's the application 
that is causing this, or if it's the nature of the paint.  Any thoughts on 
this?

And this topic brings up a point - talking about reaching hard-to-reach 
spots.  I want to baffle this tube.  How to reach the far middle and place 
those baffles?!  Spraying some paint that far is a lot different than 
attaching something to the inside wall of the tube.

Thanks.
Andy H.