[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] looking for a vendor/design for a 7 inch mirror cell

To: "atm@atmlist.net" <atm@atmlist.net>
Subject: [ATM] looking for a vendor/design for a 7 inch mirror cell
From: Gregg Swanson <Gregg.Swanson@microsoft.com>
Date: Mon, 5 Feb 2007 08:48:12 -0800
Accept-language: en-US
Acceptlanguage: en-US
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net
Thread-index: AcdIjfsvEmoquaugQW6+GrcJrtYILAAtz5uQ
Thread-topic: looking for a vendor/design for a 7 inch mirror cell

I am looking for either a supplier or a reasonable design for a 7 inch mirror cell.

Thanks,
Gregg
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] looking for a vendor/design for a 7 inch mirror cell
  - From: Mark Holm <mdholm@telerama.com>

Prev by Author: [ATM] f12 mirror advice requested
Next by Author: Re: [ATM] Flat Field Cass with Hougthon subaperture corrector. WAS:corrected dall-kirkham telescope
Previous by thread: Re: [ATM] grit size on tile tool
Next by thread: Re: [ATM] looking for a vendor/design for a 7 inch mirror cell
Index(es):
- Author
- Thread