Re: [ATM] ATM Digest, Vol 38, Issue 6

["Jerry" <wa4guu@verizon.net>]

I can't wait to try that!  Next time I make a lap, I'm going to stick them
together just so I can do that.

Jerry

-----Original Message-----
From: atm-bounces@atmlist.net [mailto:atm-bounces@atmlist.net] On Behalf Of
Ulhas Deshpande
Sent: Monday, February 05, 2007 1:30 AM
To: atm@atmlist.net
Subject: Re: [ATM] ATM Digest, Vol 38, Issue 6

Patience!!.
  Just put the sandwich on edge in a bucket of water . Leave it overnight
and you will find the mirror and tool have slipped apart.
  I know. I did it twice (Groan)
  Ulhas


  Subject: Re: [ATM] Mirror stuck on pitch lap

I haven't tried the freezer for this sort of thing. I think that might
separate the pitch from the tool also.

I have never had an 8 inch that I could not separate in 30 minutes or so. So
easy that I don't even consider this to be a problem. What I am not sure of
is in the case of cast tools. I have always used glass or marble for lap
bases. But if you have hit it with a hammer with no damage then this should
not hurt it either.



_______________________________________________
ATM mailing list http://www.atmlist.net/