[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Sphereometer accuracy

To: Dominic-Luc Webb <atm@atmlist.net>
Subject: Re: [ATM] Sphereometer accuracy
From: Richard <cnc@cncservo.co.uk>
Date: Thu, 23 Feb 2006 13:08:45 +0000
In-Reply-To: <200602230104.CAA18367@canit.se>
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <43FCD456.4070406@uiuc.edu> <200602230104.CAA18367@canit.se>
Reply-To: Richard <cnc@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

Hi Dominic-Luc,

Thursday, February 23, 2006, 1:04:41 AM, you wrote:

DLW> Yup, +/- a mm or so... I have thus far survived. I have not 
DLW> yet worked a scope that had specs that could not tolerate 
DLW> an actual ROC that differed from the specs by this amount. 
DLW> Have a lot of (any) ATMs encountered such extreme requirements?

About the same as tenth thou spherometer then...

-- 

Best regards,
  Richard in the UK

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Sphereometer accuracy
  - From: Mike Lockwood <melockwo@uiuc.edu>
- Re: [ATM] Sphereometer accuracy
  - From: Dominic-Luc Webb <dlwebb@canit.se>

Prev by Author: Re: [ATM] Commercially available spherometer withMitutoyoDigimaticIndicator
Next by Author: Re: [ATM] Commercially available Fine Screws
Prev by thread: Re: [ATM] Sphereometer accuracy
Next by thread: Re: [ATM] Sphereometer accuracy
Index(es):
- Author
- Thread