Re: [ATM] Cutting small glass discs

["Jeff Baldwin" <bald@centurytel.net>]

Some particles will be filtered and some will not.  The ones that will not 
may have long-skinny sharp shapes to them that will do the alvioli damamge. 
Use water.
Bald

Jeff and Glenda Baldwin
Beaver WA
http://home.centurytel.net/bald

----- Original Message ----- 
From: "The Alarm Co." <tac@i1.net>
To: "ATM List" <atm@atmlist.net>
Sent: Sunday, February 12, 2006 10:51 AM
Subject: [ATM] Cutting small glass discs


>I can get small (3" or so) diamond core bits pretty inexpensively, so I'm
> looking at using them tocut mirror blanks rather than the grit + tube
> method.  These are dry-cut bits, so I'm wondering about dust control.  I
> have a central dust collection system for my woodworking tools.  Is this
> sufficient for handling glass dust, or would it blow through the filter 
> bags
> and right back into the air?  I have just standard cloth filters, not the
> HEPA type.
>
> *  Best regards, Bob
> *
>         *           *   *
>
>            *         *
>
>
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
>
> 


_______________________________________________
ATM mailing list http://www.atmlist.net/