[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re[2]: [ATM] fans

To: Mark Holm <atm@atmlist.net>
Subject: Re[2]: [ATM] fans
From: Richard <cnc@cncservo.co.uk>
Date: Wed, 16 Feb 2005 12:38:31 +0000
In-Reply-To: <4212CDB3.70507@telerama.com>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <4212CDB3.70507@telerama.com>
Reply-To: Richard <cnc@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

Hi Mark,

Wednesday, February 16, 2005, 4:36:03 AM, you wrote:

MH>  Now the surface of the aluminum is oxidized.  The
MH> listed thermal conductivities for aluminum oxide..

I think you'll find that there's no Aluminium Oxide involved.
The Aluminium is often overcoated with Silicon Oxide while it's
still in the vacuum chamber.

-- 
Best regards,
 Richard                            mailto:cnc@cncservo.co.uk

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] fans
  - From: Mark Holm <mdholm@telerama.com>

Prev by Author: Re[2]: [ATM] Back Focal Distance design considerations
Next by Author: Re: [ATM] Focal Plane Calculation
Prev by thread: Re: [ATM] fans
Next by thread: Re: [ATM] fans
Index(es):
- Author
- Thread