[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] re: Wax and Pitch

To: <atm@atmlist.net>
Subject: Re: [ATM] re: Wax and Pitch
From: "Bob May" <bobmay@nethere.com>
Date: Mon, 14 Feb 2005 22:47:32 -0800
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <42112DB4.7070304@pacbell.net>
Sender: atm-bounces@atmlist.net

Throw the lap and surface into the water and heat it all up at once.
What is probably happening is that the lap is cooling down one side of the
glass and that warps the glass enough to make it not mate properly.  In
addition, the beeswax heats and that also warps things.
Bob May
bobmay@nethere.com
http://nav.to/bobmay
http://bobmay.astronomy.net

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] re: Wax and Pitch
  - From: Bill Marriott <bmarriott@pacbell.net>

Prev by Author: Re: Re[2]: [ATM] Back Focal Distance design considerations
Next by Author: Re: [ATM] Focal Plane Calculation
Prev by thread: Re: [ATM] re: Wax and Pitch
Next by thread: Re: [ATM] re: Wax and Pitch
Index(es):
- Author
- Thread